OS NINO DVB-S2 + DVB-T2/C
F u l l H D L i n u x C o m b o R e c e i v e r
Congratulations on purchasing an EDISION OS NINO DVB-S2 + DVB-T2/C
Please note that this information is valid at the time of publication.
Current information and detailed user manuals can be found on the Internet at: www.edision.gr
1 Unpacking
Remote control with 2 AAA batteries |
Documentation |
Service note |
110mm
146mm
+
-
/
>
35mm
Receiver EDISION OS NINO DVB-S2 + DVB-T2/C
Notes: The front is factory fitted with a protective foil
which can be removed easily and with caution. (Protective foil only for devices with display)
The scope of delivery may also include parts not listed here
Please contact your EDISION specialist dealer for any further support
and service.
Front Panel
1Infrared sensor for the reception of remote control commands
2Display LED, displays current information
3Card reader
Back Panel
4Input for connecting to terrestrial or cable signal from the antenna
5LNB IN: Connection for the coaxial cable
to the signal from the satellite system
6IR IN: Infrared connection port
7HD OUT: Connection to an HDTV quality TV
8ETHERNET: Ethernet port RJ45 10/100 Mbps
9S/PDIF:Audio interface for amplifier/audio console
10 RS 232: For connecting to a PC,
using RS-232 cable, for receiver software update 11 Connection for an adapter (DC 12V/2,0A)
Subpage
12 
/ 2 x USB: Connection for USB storage devices
2 Connecting and switching on
Note: For interference-free satellite TV reception, a specialist technician must calibrate your satellite TV system with a digital TV level meter
•Connect the receiver using HDMI cable via
the HD OUT output port to your TV’s HDMI input port
•Now connect the receiver to the satellite antenna cable via the ANT IN or LNB IN input.
•Insert the batteries into the remote control. Notes on the remote control can be found on the back of these instructions.
•Connect the receiver to the power supply.
•The receiver starts with the BOOT process and is operational within a short time
1 |
2 |
3
4
5 
8
11 
6 
7
9
10
ANT IN |
LNB IN 13/18V |
IR IN |
HD OUT |
ETHERNET |
S/PDIF |
RS232 |
400mA MAX |
12
|
|
ANT IN: coaxial-wire |
|
||
|
|
input from terrestrial / |
|
||
cable Antenna |
Antennawire-coaxial |
cable signal |
|
|
|
LNB IN: Connecting |
|
||||
|
|
|
|||
|
|
the cable to the satellite |
TV set connection panel |
||
|
|
signal |
|
|
|
|
|
|
|
|
Use an HDMI input! |
|
|
|
|
|
HDMI in |
|
|
|
|
|
2 |
|
|
|
|
|
1 |
ANT IN |
LNB IN 13/18V |
IR IN |
HD OUT |
ETHERNET |
HD mi |
400mA MAX |
|||||
|
|
|
|
|
kabel |
|
HD OUT: |
|
kabel |
|
|
|
|
|
|
HDMI |
|
Output receiver
Power socket
HDMI cable
Loading...