Page 1
OS MINI 4K S2X
4K Linux Sat Receiver
Congratulations on purchasing an
EDISION OS MINI 4K S2X
Please note that this information is valid at the time of publication.
Current information and detailed user manuals can be found on the Internet at: www.edision.gr
1
Unpacking
180mm
130mm
Receiver EDISION OS MINI 4K S2X
Notes:
The front is factory tted with a protective foil
which can be removed easily and with caution. (Protective foil only for devices with display)
The scope of delivery may also include parts not listed here
Front Panel
1
POWER button: Activates/Deactivates the device
2
CH- / CH+ buttons: for moving in the program lists
3
Infrared sensor for the reception of remote
control commands
4
Display LED, displays current information
Remote control with 2 AAA batteries Documentation Service note
38mm
3
POWER CH- CH+
1 2
4
Please contact
your EDISION
specialist dealer
for any further
support
and service.
OS mini 4K
Back Panel
5
LNB S2X IN: Connection for the coaxial cable
to the signal from the satellite system
6
S/PDIF: Audio interface for amplier/audio console
7
HD OUT: Connection to an HDTV quality TV
8
/ USB 1: Connection for USB storage devices
9
ETHERNET: Ethernet port RJ45 10/100 Mbps
10
/ USB 2: Connection for USB storage devices
11
IR IN: Infrared connection port
12
RS 232: For connecting to a PC,
using RS-232 cable, for receiver software update
13
Connection for an adapter (DC 12V/2,0A)
14
Card reader
2
Connecting and switching on
Note: For interference-free satellite TV reception,
a specialist technician must calibrate your satellite
coaxial-wire Antenna
TV system with a digital TV level meter
•
Connect the receiver using HDMI cable via
the HD OUT output port to your TV’s HDMI input port
•
Now connect the receiver to the satellite and
antenna cable via the LNB input.
•
Insert the batteries into the remote control.
Notes on the remote control can be found on
LNB IN S2X 13/18V
400mA MAX
the back of these instructions.
•
Connect the receiver to the power supply.
•
The receiver starts with the BOOT process
HD OUT:
Output receiver
and is operational within a short time
For information about EDISION Hardware or Software matters, please contact support@edision.gr
The CE certificate of the product is available on our webpage, by visiting this link: https://www.edision.gr/en/support
LNB IN S2X 13/18V
400mA MAX
5 6 8 9
LNB:
Connecting
the cable to the satellite
signal
HD OUT
S/PDIF
USB 1
HDMI
kabel
S/PDIF
ETHERNET USB 2
HDMI cable
HD OUT
7
IR IN RS 232
USB 1
CA
DC 12V/2,0 A
Power socket
15
ETHERNET USB 2
10 121113
CA
IR IN RS 232
TV set connection panel
Use an HDMI input!
14
DC 12V/2,0 A
HDMI in
HDm i
kabel
2
1
Page 2
OS MINI 4K S2X
4K Linux Sat Receiver
3
Remote Control UNIVERSAL 2in1
EDISION UNIVERSAL 2in1 REMOTE CONTROL is compatible with all EDISION STB’s*, plus it is pre-programmed with 5 basic functions
for SAMSUNG & LG** tv sets. Alternatively, you can program its 5 programmable buttons to any 5 functions of your TV.
1
Power
Switches between operation and standby
< PREV
< (PREV)
Return to the previous channel/service or
move to the end of the Service List or the Play List
HELP
Help
This provides users with a quick guide of
using Edision OS mini 4K
MENU
Menu
Open main menu & select sub menu using
by navigation buttons
EXIT
EXIT
Close and return to the previous menu and screen
TV/RADIO
TV / RADIO
Switch to TV mode.
Switch to Radio mode
COLOR BUTTONS
Activates certain menu functions.
Usage instructions are shown in each OSD menu
AUDIO
Audio
Select an audio track and a sound mode
/
P LAY
Starts timeshift if available
.,?!@2 ABC3 DEF
4
GHI5 JKL
7
PQRS8 TUV9 WXYZ
NUMERIC KEY (0-9)
6
MNO
Control the numerical operation
and change the Channel/Service
number directly
NEXT >
> (NEXT)
Go to the next channel/service
or move to the beginning of the
Service List or the Play List
TIMER
TIMER
Start timer function
INFO
INFO
Displays the Electronic Program Guide (EPG)
information if provided
EPG
EPG
Displays the Electronic Program Guide (EPG)
information if provided
Mute
Mutes or unmutes the audio temporarily
TEXT
TEXT
Switch between the teletext and TV modes
SUBTITLE
SUBTITLE
Display the subtitle language list
REC
Activates immediately recording-option
Notes: Many of the listed buttons have multiple functions, which, are displayed in the
menus. Some buttons and functions are optional. Important functions and buttons are
briey explained below. The buttons to be used are marked in red in the diagrams.
MANUAL INSTRUCTION FOR LEARN REMOTE CONTROL EDISION UNIVERSAL 2in1
Your set-top-box remote control has 5 learning-function keys, in the up right hand side TV keypad panel area. Each one can be used accordingly
as the following example:
1. Turning your TV set ON/OFF [TV POWER]
2. Selecting screen RATIO [Auto, 16:9, 4:3, etc)]
3. Increasing/decreasing volume [VOL+ , VOL-]
4. Command confirmation [BACK or EXIT]
The other 48 keys are for the control of the EDISION set-top-box.
SET UP FOR LEARNING FUNCTION
• Press [TV POWER] key in the up right hand side TV keypad panel area continuously for 5 Sec. until the LED lights up and keep lighting, then release the
key. This means the remote control is in the learning mode.
• Within 10 seconds, press the key in the original TV IR control, which needs to be learned, for example the [POWER] key, then the red LED is flashing. It
means this button is ready to receive the learning signal.
• Aim the emission port of the original TV remote control at the front at the emission port at the front of your set-top box remote control (distance between
these two ports has to be about 2~3 CM).
• Then press the key which is to be learned in your original TV remote control, for example the [POWER] key of your original TV remote control continuously
for 3 seconds. If the red LED flashes quickly for three times and keep lighting, it means the set-top box remote control has succeeded in receiving the
signal and you have completed the learning procedure of ON/OFF [TV POWER] key.
• Then release the [POWER] key of your original TV remote control.
If the copying procedure fails , the red LED will blink and stay OFF. In this case please repeat the procedure.
For the next programmable function, please repeat steps 1 to 3:
• Selecting screen ratio with RATIO [Auto, 16:9, 4:3, etc]
• Increasing/decreasing volume [VOL+ , VOL-]
• Command confirmation [BACK or EXIT]
Now you can operate your TV with the 5 programmed by you keys of your set-top box remote control. During the operation, the LED will flash to indicate that the
signal is transmitted!
* For EDISION STB compatibility, please visit our webpage
**LG & SAMSUNG are brand names that belong solely to LG Electronics Inc. and Samsung Electronics Co., Ltd
respectively. Any brand name reference in this text is only for informational purposes towards the consumer
that is interested in the product.
EDISION HELLAS LTD • FARMAKEIKA - 57001 N. RISIO • THESSALONIKI - GREECE
TV POWER
VOL +
VOL - BACK
RATIO
Visit us on:
www.edision.gr
Loading...