Congratulations on purchasing an EDISION progressiv hybrid lite LED
Please note that this information is valid at the time of publication.
Current information and detailed user manuals can be found on the Internet at: www.edision.gr
Unpacking
Connecting and switching on
Remote control with 2 AAA batteries Documentation Service note
1
2
1
HDMI in
2
HD mi
kabel
HDMI
kabel
HDMI SCART
DC 5V/1,0 A
S/PDIFANT IN
Receiver progressiv hybrid lite LED
Notes: The front is factory tted with a protective foil which can be removed easily
and with caution. (Protective foil only for devices with display)
The scope of delivery may also include parts not listed here
Front Panel
1
Infrared sensor for the reception of remote
control commands
2
Display LED, displays current information
3
Card reader
Back Panel
4
ANT IN: Input for connecting the signal from the antenna
5
S/PDIF: Audio interface for amplier/audio console
6
HDMI: Connection to an HDTV quality TV
7
SCART: For connecting to a TV set,
using SCART cable [not for HD TV]
8
Connection for an adapter (DC 5V / 1,0A)
Subpage
9
/USB: Connection for USB storage devices
Note: For trouble-free signal reception your antenna
and cable installation should be calibrated
and inspected by a qualied professional with a digital
TV-level-measuring instrument.
•
Connect the receiver’s HDMI-output to the HDMI-input
of your television set (TV), for HDTV quality.
• Then connect the coaxial cable from the terrestrial
antenna to the ANT IN input of the receiver.
• Insert the batteries into the remote.
Further information you will nd at the back
of this instruction manual.
• Connect the receiver to the mains power supply network,
by means of it’s power supply unit included in the package.
• The receiver starts with the BOOT-process and will be ready
for you to enjoy in a few minutes.
Please contact
your EDISION
specialist dealer
for any further
support
and service.
Power socket
HDMI:
Output receiver
HDMI cable
TV set connection panel
Use an HDMI input!
ANT IN:
coaxial-wire
input from terrestrial
antenna.
progressiv hybrid lite LED
FullHD DVB-C/T2 Receiver
WebTV
OPTION
AUDIO TXT
REC
ZOOM
TV/AV
35mm
110mm
146mm
9
HDMI SCART
DC 5V/1,0 A
S/PDIFANT IN
4 5
6
7
8
hybrid lite
1 2
3
coaxial-wire Antenna
After the rst start,
choose your language
progressiv hybrid lite LED
FullHD DVB-C/T2 Receiver
...
TV/AV
WebTV
OPTIONAUDIO TXT
REC
ZOOM
TV/AV
Installation Remote Control Unit
3 4
For further information, please visit our website:
www.edision.gr
Note: Many of the listed keys have multiple functions which
are shown upon menu display. Some keys and functions
refer to optional features.
Important features and keys are
explained in the functions below.
The respective keys are in red on the
graphs.
Inserting batteries into the remote control
Pay attention to the correct polarity while inserting the batteries (2XAAA).
If the remote is not to be used for extended period of time please remove the batteries to avoid
potential damage to the remote. Dispose of the batteries properly according to recycle procedures.
Receiver On/off.
Sound volume mute on/of.
For TV/Radio station selection,
manual enter of numbers
and letters in the menus.
Switches from tv to radio and vice versa.
Returns to previous channel.
Displays the main menu.
Displays the information bar.
With the arrow keys you can scroll
in the lists up and down, left and
right or regulate the volume.
With the OK-key you conrm your
menu-entry or activate
the channel-list.
Stops a menu/pop-up window.
Selection of the electronic programm-support
EDIVISION.
for searching for programms in lists.
Displays a le-list.
Scrolls in lists channel-list
forward or backwards.
Displays the favourite-lists.
Displays the lists of satellites.
Changes the display TV standard.
Enables fast rewind.
Enables fast forward.
Returns to the start, alternatively to
the previous recording.
Switches to the end, alternatively
to the next recording.
Manual recording start.
Play start/pause.
Stops timeshift, recording or playing.
Activates the audio-menu.
Option button. Switching between
TV/AV mode (Not in HDMI mode).
Activates the menu “Subtitle/teletext”.
Web TV key.
Terrestrial Scan
After you have connected the antenna cable to the receiver and have sufcient signal level, select the «Blind
scan press OK» button and press the «OK» button or the red button on your remote control to search for
digital terrestrial (DVB-T / T2) channels. If you want a manual search, select «TP Edit press OK for start»
with «OK» and then press the «OK» button or the green button on your remote control to conrm. Select the
«CH. No.» (TP) channel and then «Start Search» with the «OK» or the green button.
Cable Full-Scan
After you have connected the antenna cable to the receiver and have sufcient signal level,
select the «Blind scan press ΟΚ» and
press «OK» or the red button on your remote control to search for all available digital cable programs (DVB- C) Info: This process
can take up to 20 minutes depending on the cable provider!
Cable NID Fast-Scan (Cable Provider NID Scan)
After you have connected the antenna cable to the receiver and have sufcient signal level, select the «Provider» and «Provider name»
(for example, KD Muenchen) from the list. Then go to «Start search» and press «OK» or the green button on your remote control,
then the programs of your cable provider should appear in a few seconds. If your provider is not in the list, please contact your cable
provider directly and ask for your 5-digit network ID (e.g., NID 11111). Then enter your NID and press «Start Search» or the green key.
Loading...