FusionHDTV
1. Before Getting Started
2. Software Installation
3. Hardware Installation
4. Using FusionHDTV
All specifications and information are subject to changes without further notices
2
FusionHDTV USER License
DViCO Corporation (“DViCO”) is granting you (an individual or an entity, either of which is referred to herein
as “License”) a license to use DViCO’s FusionHDTV computer software, hardware, associated media and
printed materials only upon the condition that Licensee accepts all of the terms and conditions contained in
this User License Agreement (the “Agreement”). If Licensee does not agree to he terms of this Agreement,
Licensee should not install or use the Products rather, promptly return the Products to the place of purchase.
1. Grant of License. This Agreement grants Licensee a personal, limited, non -transferable, non-exclusive
right to install and use one copy of the Products on a single computer. No other uses and/or distribution of
the Products are permitted without DViCO’s prior written consent. DViCO reserves all rights not expressly
granted to Licensee.
2. Limitations or Restrictions. Licensee may not: (i) modify or translate the Products; (ii) reverse engineer
or disassemble the Products, except and only to the extent this restriction is expressly permitted by
applicable law; (iii) separate the Products component parts to transfer to a third party.
3. Intellectual Property Rights. Licensee acknowledges that no title to the intellectual property in the
Products and any components thereof is transferred to Licensee. All rights, titles and copyrights in and to the
products are owned by DViCO. The Products are protected by copyright laws and international copyright
conventions and treaties.
4. Disclaimer of Warranty. The Products are deemed accepted by Licensee. The PRODUCTS are provided
to Licensee “AS IS” and without warranty of any kind. To the maximum extent permitted by applicable law,
DViCO further disclaims all warranties including without limitation any implied warranties of merchantability,
fitness for a particular purpose, and non -infringement. Any and all risk arising out of the use or performance
of the PRODUCTS remains with Licensee. In no event shall DViCO or its suppliers be liable for any
consequential, incidental, direct, indirect, special, punitive, or other damages whatsoever (including, without
limitation, damages for loss of business profits, business interruption, loss of business information, or other
pecuniary loss) arising out of this Agreement or the use of or inability to use the Products, even if DViCO has
been advised of the possibility of such damages. Because some states/jurisdictions do not allow the
exclusion or limitation of liability for consequential or incidental damages, the above limitation applies only to
the extent permitted by applicable law.
5. Limitation of Liability. DViCO’s total liability and Licensee’s exclusive remedy under this Agreement shall
not exceed the replacement cost of a single copy of the Products.
6. Indemnification. Licensee shall hold harmless, indemnify and defend DViCO, its officers, directors and
employees, from and against any claim, suit or proceeding and any losses, damages, fines and expenses
All specifications and information are subject to changes without further notices
3
(including attorneys’ fees and costs) arising out of or relating to any claims that Licensee’s use of the
Products in conjunction with any Licensee Application infringes the patent,
copyright, trademark, trade secret, or other proprietary rights of any third party, or resulting from any breach
of this Agreement by Licensee.
7. Termination. Without prejudice to any other rights, DViCO may terminate this Agreement if Licensee fails
to comply with any term or condition of this Agreement. Upon termination of this Agreement, Licensee shall
immediately discontinue the use of the Products and certify destruction of all full or partial copies of the
Products and related materials provided by DViCO. Licensee may also terminate this Agreement at any time
by destroying the Prod ucts and all copies thereof.
8. General. Licensee acknowledges that he or she has read this Agreement, understands it, and that by
using the Products Licensee agrees to be bound by the terms and conditions set forth in this Agreement.
Licensee further agrees that the Agreement is the complete and exclusive statement of the understanding
between DViCO and Licensee which supersedes any proposal or prior agreement, oral or written, and any
other communication between DViCO and Licensee relating to the subject matter of this Agreement. This
Agreement may not be modified except in a writing duly signed by an authorized representative of DViCO
and Licensee. If any provision of this Agreement is held to be unenforceable for any reason, such provision
shall be reformed only to the extent necessary to make it enforceable, and such decision shall not affect the
enforceability of such provision under other circumstances, or of the remaining provisions hereof under all
circumstances.
All specifications and information are subject to changes without further notices
4
1 Before Getting Started.........................................................................................5
1.1 FusionHDTV Specification ..................................................................................................5
1.2 FusionHDTV System Requirements ....................................................................................7
1.3 Package contents...............................................................................................................8
2 Software Installation ............................................................................................9
2.1 Installing FusionHDTV Applications .....................................................................................9
2.2 Driver installation under Windows ME ................................................................................17
2.3 Driver installation under Windows 2000 Professional .......................................................... 20
2.4 Driver installation under Windows XP ................................................................................ 23
3 Hardware Installation.........................................................................................26
3.1 About the Board ............................................................................................................... 26
3.2 Before Installation ............................................................................................................ 27
3.3 Board Installation ............................................................................................................. 27
3.4 Remote Installation ...........................................................................................................28
4 Using FusionHDTV.............................................................................................29
4.1 Starting and Quitting......................................................................................................... 29
4.2 Display setup ................................................................................................................... 29
4.3 Configuration ................................................................................................................... 32
4.4 Record ............................................................................................................................ 42
4.5 Playing Files .................................................................................................................... 44
4.6 SnapShot Capturing ......................................................................................................... 44
4.7 Using EPG .......................................................................................................................45
4.8 Cut Editing....................................................................................................................... 48
4.9 Using FusionRemote........................................................................................................ 50
4.10 Using Signal Checker ....................................................................................................... 60
4.11 Using FusionConverter ..................................................................................................... 61
4.12 FusionHDTV Shortcut Key ................................................................................................ 63
5 Technical Support...............................................................................................64
All specifications and information are subject to changes without further notices
5
1 Before Getting Started
1.1 FusionHDTV Specification
A Highly cost effective ATSC/ NTSC TV reception card
You can enjoy HDTV at quite a low price due to Dvico’s innovative HDTV software decoding engine
and enhanced Reception rate with Latest 5th generation chipset .
Unrivaled crystal-clear picture quality
FusionHDTV provides up to 5 times higher resolution when compared to analog TV, and provides
crisp and crystal-clear picture quality to a PC screen.
Good picture quality on LCD or low -resolution monitor
FusionHDTV shows excellent and super-clear on HDTV screens and even on LCD TV’s and low
resolution CRT due to Dvico’s proprietary decoding engine.
Great system compatibility
FusionHDTV is compatible with most video cards and motherboards. FusionHDTV works on any
recent VGA cards including Nvidia MX series or later chipsets, as well as ATI Radeon chipsets. It
works quite well on Intel, VIA, SIS , and other motherboard chipsets. Minimum system requirements
are Pentium 4 1.6G and DDR266 memory (or RDRAM memory), or AMD’s Athlon™ XP 1600+ or
faster processor, if you don’t have the ATI Radeon VGA card. Pentium 3 800Mhz or faster will be
enough if you have an ATI Radeon card.
Recording and playback of the HDTV stream
You can record live HDTV broadcasting streams to a PC and play them back anytime you want.
Using most recent VSB tuner – Best DTV reception rate
FusionHDTV uses the most recent VSB tuner to get the best reception rate, so you can get the un interrupted and stable HDTV screen.
8VSB/64QAM/256QAM reception support
FusionHDTV3 Gold works either with free to air digital TV(8VSB) and unencrypted digital cable
TV(QAM) broadcasting channels. so you will have the ability to receive all the channels available to
you at your location.
All 18 ATSC formats compliant
FusionHDTV supports all of the 18 formats of ATSC broadcasting, so you can experience the all of the
full ATSC format-rich content available.
AC3 audio output
FusionHDTV provides AC3 audio decoding, which is the standard audio format for ATSC. It can also
bypass the AC3 audio to digital output and connect directly to an AV amplifier.
High resolution still capture
FusionHDTV provides high resolution still screen capturing capability in live playback as well as file
playback mode.
Cut Edit feature – Cut the transport stream files
You can cut out the wanted scenes from the captured file and reconstruct the video clip.
Supports virtual channel
Virtual channel is set on the channel list independent of physical channel.
All specifications and information are subject to changes without further notices
6
- OSD for virtual channel and broadcasting station name is shown whenever channel is changed.
Supports sub-channel
Sub channel is listed up in sub channel play list and can be selected with channel up/down button or
mouse selection in sub channel play list.
Second language
Supports the second language in digital broadcasting
Supports screen saver off.
Screen saver is off while FusionHDTV runs.
Supports AAC audio decoding (Only GOLD series)
TS file clips and DVHS with AAC audio can be played directly in Fus ionHDTV.
Direct NATIVE .MPG recording
You can record DTV stream to .MPG format directly .
Add To Favorite List
You can add your favorite programs into favorite list before watching them.
HD-to-DVD or DivX format conversion (Only GOLD series)
HD clips can be converted to MPEG2, DVD files or DivX format using FusionConverter tool.
Supports DVHS record and control ( Windows XP or above only ) (Only GOLD series)
Direct DVHS capture/ recording/ playback with OHCI card
Supports Titan EPG
Supports recording and live viewing according to TitanTV EPG.
Embeds the TitanTV EPG on the FusionHDTV application.
Time Shifting
FusionHDTV provides the various file playback functions just like live TV mode. That is, pause/ instant
replay/ time-shifting by scroll bar/ fast-forward/ fast-rewind.
Being interrupted while watching live TV programs (such as pick up phone calls & answer the door), all
you need to do is simply press the Pause button and freeze the picture for a period of time, and then
pick up right where you left off.
The FF/REW Function is available Windows XP Service Pack 2 or above.
All specifications and information are subject to changes without further notices
7
1.2 FusionHDTV System Requirements
System requirements for FusionHDTV are as follows
<Input/Output>
[ FusionHDTV 5 GOLD ]
antenna
One inside stereo connection jack to sound card for analog TV
S-Video IN, Composite IN
External Sound card Connection cable
[ FusionHDTV 5 Lite ]
antenna
One inside stereo connection jack to sound card for analog TV
<DxVA VGAs>
Pentium3 800MHz or faster with 128M memory
Celeron 900Mhz or faster with 128M memory
GeForce4 MX420,440, Fx5200,5600 Series, Ti Series
All ATI Radeon series VGAs
WinME/2000/XP or later
Ultra-DMA66 enabled main board and HDD for recording
<nonDxVA VGAs>
Pentium4 1.6GHz or faster with 128M memory
All Nvidia MX series VGAs and ATI Radeon series VGAs
DDR266 or faster memory
WinME/ 2000/ XP or later
Ultra-DMA66 enabled main board and HDD for recording
<DVHS>
Windows XP or above only.
OHCI compatible 1394 card
All specifications and information are subject to changes without further notices
8
1.3 Package contents
The FusionHDTV package contains the following items:
[ FusionHDTV 5 GOLD,SILVER ]
① FusionHDTV card
② Setup CD
③ Manual
④ Internal cable to sound card for External output Audio
⑤ External connection cable
[ FusionHDTV 5 Lite ]
① FusionHDTV card
② Setup CD
③ Manual
④ Internal cable to sound card for External output Audio
* Optional FusionHDTV remote transceiver and basic option for Plus Version
①FusionHDTV transceiver
Recei ver ②
<Important Notice>
First install the software before you plug the FusionHDTV card in your system. It will ease the installation
process. If you plugged the card in already, you can still proceed anyway.
1 2 3 4 5 1 2
All specifications and information are subject to changes without further notices
9
2 Software Installation
Most likely there will be an updated version of the files on our web site.
Please check the site (Http://www.FusionHDTV.co.kr/Eng), before you install the software included in the CD.
2.1 Installing FusionHDTV Applications
Insert FusionHDTV Installation CD into the CD-ROM drive. The setup window will automatically pop up. if
you downloaded the recent version on DVICO’s website, please run install.exe or setup.exe.
2.1.1 Uninstall Drivers
1) When you select Uninstall Driver in the menu on the FusionHDTV INSTALLER program, Select your
FusionHDTV board type.
2) It will remove all the old drivers previously installed.
3) When all the drives are removed, you will see following message.
All specifications and information are subject to changes without further notices
10
2.1.2 Installing FusionHDTV Software
Important: Installation on Windows 2000 Professional or Windows XP
Before you install FusionHDTV software, be sure that you logged on as an account with
Administrator privileges .
1) Select “Install FusionHDTV”.
2) At the FusionHDTV Installation dialog opens , click on the “Next>” button.
3) The user Information window will show up. Type in the serial number, which is on the jacket of
FusionHDTV installation CD, then click on the “Next” button.
All specifications and information are subject to changes without further notices
11
4) The “Choose Destination Location” window will appear. Click on “Next” if you want to install the
FusionHDTV in the default directory. Otherwise, you can choose a different directory by clicking on
“Browse ”.
5) Press “Next” on the Destination Folder selection window.
6) The “Setup status” window will appear.
All specifications and information are subject to changes without further notices
12
7) Choose your country, then click “OK”.
8) PC specification selection windows will appear. Please select the appropriate system. You can
change the mode after installation with configuration menu of the application program. You do not
need to reinstall the program with different options.
All specifications and information are subject to changes without further notices
13
9) Select your FusionHDTV card, and Press ‘Next’ to install latest drivers.
10) You will see the progress window.
All specifications and information are subject to changes without further notices
14
11) Press “Yes” for the digital signature message.
12) Following message indicates the completion of the setup.
13) By clicking the Finish button, the software installation is done.
14) When you reboot, the system will ask for the 5~6 drivers. Please click “Yes” when the digital
signature window appears.
<Notes>
In certain cases, Windows will ask for the .sys files. You can locate the sys files in the C:\Program
Files\DVico\FusionHDTV\driver folder.
All specifications and information are subject to changes without further notices
15
2.1.3 Installing Microsoft DirectX 9
Important! Installing on Windows 2000 Professional or Windows XP
Before you install FusionHDTV software, be sure that you logged on as an account with
Administrator privilege s.
You can check the version of DirectX by typing “dxdiag” on the command line which appears with
menu selection “start->run”
If you have DirectX 9 or later already, you do not need to install DirectX 9 again.
1) Run ‘Install.exe’ and then select “Install Direct 9”.
2) Read the License Agreement carefully and check “I accept the agreement” and then click on “Next”
if you agree.
3) To start installing of DirectX 9.0 Runtime, click on “Next”.
All specifications and information are subject to changes without further notices
16
Tip If there is a DirectX already installed in the system, a different window will show up instead of the
one above.
4) Click on “Finish” to restart system and complete installation of the DirectX.
All specifications and information are subject to changes without further notices
17
2.2 Driver installation under Windows ME
2.2.1 Before Installation
Make sure to install the software in the following order.
1) Install the Application software (refer to 2.1 Installing FusionHDTV Applications)
2) Install Hardware(Board) (refer to 3.3 Board Installation)
3) Install Windows ME Driver (refer to 2.2.2 Installing Windows ME driver)
4) Check Windows ME device manger (refer to 2.2.3 Checking Windows ME Driver)
2.2.2 Installing the Windows ME driver
1) Insert the FusionHDTV board into the PCI local bus slot. When Windows ME starts, the Add New
Hardware Wizard will pop up automatically.
2) The Found New Hardware window will pop and FusionHDTV 88x, WDM Video Capture (NTSC)
driver will be installed automatically.
3) The Add New Hardware Wizard will pop up automatically and “FusionHDTV 88x, BDA Receiver
Component (ATSC-A)” driver will be installed automatically.
4) After the Files Needed Window appears, look for the ‘zl88Tcap.sys’ file by clicking the browse button.
Select the driver directory under the installation directory. (ex : C:\Program
Files\Dvico\Fus ionHDTV\driver)
All specifications and information are subject to changes without further notices
18
5) If a version conflict message appears during installing, preserve existing file by pressing ‘Keep’.
6) The Add New Hardware Wizard will pop up automatically and “FusionHDTV 88x, WDM ATSC
TvTuner (LG062F)” driver installation will be done automatically.
7) The Add New Hardware Wizard will pop up automatically and “FusionHDTV 88x, WDM Crossbar”
driver installation will be done automatically.
8) The Add New Hardware Wizard will pop up automatically and “FusionHDTV 881, WDM Audio
Capture” driver installation will be done automatically.
9) The Add New Hardware Wizard will pop up automatically and “FusionHDTV 88x, BDA ATSC
Tuner/Demod (LG062F)” driver installation will be done automatically.
2.2.3 Checking Windows ME driver
If all four drivers are found in the device manager, the Windows ME driver is installed properly. Otherwise,
you must reinstall the driver.
Right click the “My Computer” icon and select “properties” from the popup menu. Check whether you see
four new devices starting with “Fusion” und er the “Sound video and game controllers”.
All specifications and information are subject to changes without further notices
19
[ FusionHDTV 5 Lite ]
[ FusionHDTV 5 GOLD, 5 GOLD PLUS, FusionHDTV 5 Silver , 5 Silver PLUS ]
** In certain cases, Windows will ask for the .sys files. You can locate the sys files in the C:\Program
Files\DVICO\FusionHDTV \driver or C:\Windows\System32\Drivers folder. Or Windows will ask for the
Kstvtune.ax files. You can locate the ax files in the C: \Windows \System folder.
All specifications and information are subject to changes without further notices
20
2.3 Driver installation under Windows 2000 Professional
2.3.1 Before Installation
Make sure that you install the software in the following order.
1) Install the Application software(refer to 2.1 Installing FusionHDTV Applications)
2) Install hardware(board) (refer to 3.3 Board Installation)
3) Install the Windows 2000 Drivers (refer to 2.3.2 Installing Windows 2000 driver)
4) Check Windows 2000 device manager (refer to 2.3.3 Checking Windows Driver)
2.3.2 Installing Windows 2000 driver
1) Insert the FusionHDTV board into the PCI local bus slot. When Windows 2000 starts, the Add New
Hardware Wizard will pop up automatically.
2) When the Digital Signature Not Found window appears, Click on “Yes”.
3) The “New Hardware Wizard” window will pop up automatically.
Loading...