Duke FTU-10 Parts List

FLEXTECH HUMIDIFIED HOLDING

Illustrated Parts List

CABINET (FTU)

MODELS

FTU-5 FTU-5S (STACKED) FTU-10

Reproduction without written permission is prohibited. Duke is a registered

trademark of the Duke Manufacturing Co.

Duke Manufacturing Co.

2305 N. Broadway • St. Louis, MO 63102

800.735.3853

FTU-10

FTU-5

• 314.231.1130

Fax: 314-231-5074

www.dukemfg.com

7/16/2019IPL-PH-FT-0021

Illustrated Parts Lists for Duke FTU-5 & FTU-10

FlexTech Humied Holding Cabinet

TABLE OF CONTENTS

FTU-5 UNIT PANELS AND DOORS ....................................................................................................................4

FTU-5 CONTROLLER PANEL .............................................................................................................................6

FTU-5 CONTROL AND REAR PANEL ASSEMBLIES .........................................................................................7

FTU-5 CONTROL PANEL COMPONENTS ..........................................................................................................8

FTU-5 INTERIOR CABINET AND BASE ..............................................................................................................9

FTU-5 BASE ASSEMBLY ...................................................................................................................................10

FTU-5 WATER SUPPLY ASSEMBLY COMPONENTS ......................................................................................12

FTU-5 HUMIDIFICATION AND FAN ASSEMBLY ...............................................................................................14

FTU-5 INSULATION ...........................................................................................................................................16

FTU-5 HEATING COMPONENTS ......................................................................................................................17

FTU-5 SINGLE CORD REAR ADAPTER ASSEMBLY .......................................................................................18

FTU-5 DUAL CORDS REAT ADAPTER ASSEMBLY .........................................................................................19

FTU-5 & FTU-10 UNIT DOORS .........................................................................................................................20

FTU-5 & FTU-10 HARNESSES ..........................................................................................................................22

FTU-10 UNIT PANELS AND DOORS ................................................................................................................24

FTU-10 CONTROL PANEL ................................................................................................................................26

FTU-10 REAR PANEL ASSEMBLIES ................................................................................................................28

FTU-10 INSULATION .........................................................................................................................................30

FTU-10 INTERIOR CABINET AND BASE ..........................................................................................................31

FTU-10 BASE ASSEMBLY .................................................................................................................................32

FTU-10 HUMIDIFICATION AND FAN ASSEMBLY .............................................................................................34

FTU-10 HEATING COMPARTMENT ..................................................................................................................36

FTU-10 WATER SUPPLY ASSEMBLY COMPONENTS ....................................................................................37

IPL-PH-FT-00217/16/2019

Illustrated Parts Lists for Duke FTU-5 & FTU-10

FlexTech Humied Holding Cabinet

How to Determine Manufacture Date from

Duke Equipment Serial Numbers

All units currently manufactured in St. Louis and Sedalia, Missouri (After 2/1/2013):

08 03 0202

Month Manufactured Sequential Number

Year Manufactured

(Example: 08030202 = Indicates the unit was manufactured in August of 2003)

Units Manufactured in St. Louis, Missouri (Before 2/1/2013):

30 IF AA 0123

Unit Identification Sequential Number 10 = 5/9 20 = 6/13 & E-Series 30 = 6/18 & 3/9 90 = FBB Month of Manufacture 94 = FWM JA = January 95 = IRHU JB = February 99 = Dry Channel JC = March JD = April Year of Manufacture JE = May A = 1 JF = June B = 2 JG = July C = 3 JH = August D = 4 (Examples) JI = September E = 5 (JJ = 2000) AJ = October F = 6 (JA = 2001) AA = November G = 7 (JB = 2002) AB = December H = 8 I = 9 J = 0

7/16/2019IPL-PH-FT-0021

Illustrated Parts Lists for Duke FTU-5 & FTU-10

FlexTech Humied Holding Cabinet

FTU-5 UNIT PANELS AND DOORS

ITEM PART NUMBER DESCRIPTION QTY

1 169388 PANEL, TOP, PAINTED 1

169389 PANEL, TOP, STACKED PAINTED

2 279500 SCREW, PH TR HD SS, 8-32 X 1/2" 49

3 169390 PANEL, SIDE, PAINTED 2

4 513032 SCREW-8-18 x 1/2" SS TEK 36

5 169637 FTU, GASKET, DOOR 2

6 169685 SCREW, #10-24 x 1/2" PH FL W/NYLON PATCH 12

169047 ASSY, SOLID DOOR LEFT HINGE

169048 ASSY, SOLID DOOR RIGHT HINGE

169056 ASSY, GLASS DOOR, LEFT HINGE

169058 ASSY, GLASS DOOR RIGHT HINGE

169070 ASSY, FLIP DOWN DOOR, LEFT HINGE

169071 ASSY, FLIP DOWN DOOR, RIGHT HINGE

169394 RETAINER, DOOR GASKET, HORIZ. 4

169395 RETAINER, DOOR GASKET, VERT. 4

169675 HINGE, DOOR, FTU A/R

169668 LATCH, FTU DOOR A/R

169053 WELDMENT, SOLID DOOR, FTU A/R

169636 FTU, DOOR, GLASS, DUAL PANE A/R

512938 SCREW, #10-24 × 1 FL PH SS W/NYTEMP PATCH A/R

407064 SCREW, 10-24 × 3/8" TRUSS HD, SS A/R

10280400 SCREW, 10-24 × 3/8" TR PH SS A/R

169093 ASSY, FD, FRAME DOOR & CHANNEL A/R

297000 SEALANT, SILICONE, ALUMINUM, NSF A/R

169712 SCREW, #10-24 × .25IN TR PH MACHINE A/R

71350 LOCKING COUMPOND, 242 THREAD LOCKER A/R

Table: PL-1 FTU-5 Unit Panels and Doors

IPL-PH-FT-00217/16/2019

Illustrated Parts Lists for Duke FTU-5 & FTU-10

FlexTech Humied Holding Cabinet

12, 13, 17

Figure: PL-1 FTU-5 Unit Panels and Doors

7/16/2019IPL-PH-FT-0021

Illustrated Parts Lists for Duke FTU-5 & FTU-10

FlexTech Humied Holding Cabinet

FTU-5 CONTROLLER PANEL

ITEM PART NUMBER DESCRIPTION QTY

1 120007 CONNECTOR, USB PANEL MOUNT 1

2 ELC0017-2 PCB, TSC, FTU 1

3 513158 NUT, 8-32, SERRATED FLANGE 4

4 169028 WELDMENT, CONTROL PANEL (155625 Nutserts must be Factory Installed) 1

5 169629 SWITCH, SEALED CARLING 1

6 169680 OVERLAY, CONTROL, FTU 1

7 168158 PLATE, DATA KEY COVER - DSO 1

8 168500 SCREW, 8-32 x 3/16 x 3/16 D. SHDR 1

9 168160 WASHER, .195 ID x .354 OD x .032 THK SS 2

10 156840 LABEL, ELECTRICAL DANGER 1

Not Shown 600499 Assembly, Service, Open Loop-Closed Loop Firmware, FTU 1

Table: PL-2 FTU-5 Controller Panel

Figure: PL-2 FTU-5 Controller Panel

IPL-PH-FT-00217/16/2019

Illustrated Parts Lists for Duke FTU-5 & FTU-10

FlexTech Humied Holding Cabinet

FTU-5 CONTROL AND REAR PANEL ASSEMBLIES

ITEM PART NUMBER DESCRIPTION QTY

1 169027 ASSEMBLY, CONTROL PANEL 1

2 169045 ASSEMBLY, FRONT ADAPTER 1

3 297000 SILICONE SEALANT, ALUM. COLOR 1

4 10280400 SCREW, 10-24 x 3/8" TR PH SS 19

5 279500 SCREW, PH TR HD SS,8-32 X 1/2" 51

6 169670 FTU, BLOWER, VENT 1

7 168378 SCREW, 8-32 X .375 PN PH S/S 11

8 169044 ASSEMBLY, PANEL, REAR, TOP 1

9 169026 ASSEMBLY, AXIAL FAN 1

10 169370 BRACKET, MTG COOLING FAN (155625 Nutserts must be Factory Installed) 1

11 169398 WATER GUARD, TOP, FTU 1

12 155625 NUTSERT, #8-32 2

13 169667 FAN 1

14 10280400 SCREWS 4

15 169760 STANDOFF, RUBBER 2

16 159101 SCREW, 8-32 × 1-1/2 PN PH SS 2

Table: PL-3 FTU-5 Control and Rear Panel Assemblies

Figure: PL-3 FTU-5 Control and Rear Panel Assemblies

7/16/2019IPL-PH-FT-0021

Illustrated Parts Lists for Duke FTU-5 & FTU-10

FlexTech Humied Holding Cabinet

FTU-5 CONTROL PANEL COMPONENTS

ITEM PART NUMBER DESCRIPTION QTY.

1 169614 SPACER, ALUM., .375OD, .166ID, .250 LG 2

2 225427 RELAY GEN PURPOSE DPST 2

3 168378 SCREW, 8-32 x .375 PN PH S/S 11

4 120103 FUSE, MOD CONTROL, TSC 2

5 160814 SCREW, 10-24 x 1-1/4" TR PH SS 2

6 120102 FUSE HOLDER, MOD CONTROL 1

7 168128 SCREW, 8-32 x 5/8" PN PH SS 2

8 175765 TRANSFORMER, 240V 1

9 169029 ASSEMBLY, SSRs (Includes ITEM'S 10, 11 AND 12) 1

10 169397 PLATE, HEAT SINK 1

11 120005 SSR, 25A 3-32VDC TRIGGER 2

12 279500 SCREW, PH TR HD SS,8-32 × 1/2" 4

13 169773 PCB, IO, TSC-6/18M 1

14 120011 PCB, 12V PWR 208/230V 1

15 120501 FUSE, 3.15 AMP 5 x 20 MILLIMETER (REF. 120011) 1

16 512766 BUZZER, ULTRA LOUD CONTINUOUS TONE 1

Table: PL-4 FTU-5 Control Panel Components

Figure: PL-4 FTU-5 Control Panel Components

IPL-PH-FT-00217/16/2019

Illustrated Parts Lists for Duke FTU-5 & FTU-10

FlexTech Humied Holding Cabinet

FTU-5 INTERIOR CABINET AND BASE

ITEM PART NUMBER DESCRIPTION QTY.

1 169759 RACK, WIRE FTU 2 169191 WELDMENT, HANDLE PNL INNER SIDE 3 169192 ASY, DUCT, FTU CMN VENT INTERNAL 4 169136 ASY, COVER, FTU DUCT REAR 5 154219 NUT, 6-32, HEX KEPS 6 169343 PLATE, OUTLET 7 279500 SCREW, PH TR HD SS,8-32 X 1/2" 8 169187 WLDMNT, FRT BASE COVER, FTU

9 169679 VENEER, HI LIMIT 10 169676 INSULATION, LOWER, REAR 11 169042 ASY, INSULATION SUPPORT, LEFT 12 169043 ASY, INSULATION SUPPORT, RIGHT 13 169506 SUPPORT, FTU INSULATION CTR 14 153657 BUSHING, SPLIT, 1.375 HOLE 15 10280400 SCREW,10-24 x 3/8" TR PH SS 16 169188 WELDMENT, REAR BASE COVER, FTU 17 169119 ASSY, WALL MOUNTING HARDWARE 1 18 512835 CASTER, 2-1/2" SWIVEL W/LO 2 19 512836 CASTER, 2-1/2" SWIVEL 2 20 983305 SCREW, 5/16-18 × 3/4" HX CP ZP 16

Table: PL-5 FTU-5 Interior Cabinet and Base

ATTACH LAYNARD TO PEM INSIDE DUCT USING

154219 (NUT, 6-32, KEPS)

Figure: PL-5 FTU-5 Interior Cabinet and Base

APPLY LABEL HERE

7/16/2019IPL-PH-FT-0021

Illustrated Parts Lists for Duke FTU-5 & FTU-10

FlexTech Humied Holding Cabinet

FTU-5 BASE ASSEMBLY

ITEM PART NUMBER DESCRIPTION QTY.

1 169016 WELDMENT, DUCT MACHINE COMPT 1

2 169015 ASSY, INLET DUCT 1

3 169604 GROMMET, SILICONE .875 3

4 169337 PAN, INSULATION 2

5 169656 INSULATION, COOLING DUCT 2

6 168429 BLOWER, SIDE TANGENTIAL 208-230VAC 105CFM 1

7 513158 NUT, 8-32 SHLDR SERRETED Z ZINC 9

8 169784 SCREW, 6 × 3/8" PN PH SM SS 4

9 169655 INSULATION, BASE 2 10 156954 LABEL, GROUND SYMBOL 1 11 169030 ASSY, BRKT INTERLOCK SWITCH SP 1 12 168303 SWITCH, PRIMARY & SECONDARY 1 13 169612 LOCKNUT, 8-32 SERRATED FLANGE HEX HEAD 2 14 169117 WELDMENT, OUTLET TRANSITION DUCT 1 15 169040 ASSY, SPILLAGE PAN 1 16 279500 SCREW, 8-32 × 1/2" PTHMS 18-8SS 2 17 156840 LABEL,1CAUTION ELECT'L HAZARD 2

169013 ASSY, BASE NON-STACKING 1

169038 ASSY, BASE STACKING LOWER UNIT 1 169039 ASSY, BASE STACKING UPPER UNIT 1

175514 BUSHING, HEYCO SHORTY 1” 1

Table: PL-6 FTU-5 Base Assembly

IPL-PH-FT-00217/16/2019

Illustrated Parts Lists for Duke FTU-5 & FTU-10

FlexTech Humied Holding Cabinet

Figure: PL-6 FTU-5 Base Assembly

7/16/2019IPL-PH-FT-0021

Illustrated Parts Lists for Duke FTU-5 & FTU-10

FlexTech Humied Holding Cabinet

FTU-5 WATER SUPPLY ASSEMBLY COMPONENTS

ITEM PART NUMBER DESCRIPTION QTY.

1 169025 ASY, WATER SUPPLY COMPONENTS 1

2 169606 VALVE, SOLENOID DEMA P442 1

3 169678 FITTING, PIPE 1/4” NPT BRASS HEX NIPPLE 1

4 169602 ORIFACE, FLOW RESTRICTOR #35 1/4” NPT MALE 1

5 169301 ANGLE, REGULATOR 1

6 169605 REGULATOR, WITH GAUGE 1/4” NPT FEMALE 1

7 169055 ASY, REG BRACKET WATER SUPPLY 1

8 169611 FITTING, BRASS YOR-LOK ADAPTER 1/4 TUBE × 1/4 NPT MALE 1

9 168378 SCREW, 8-32 × 3/8”PN PH SS 2

10 169633 FITTING, BRASS YOR-LOK 90 DEGREE ELBOW 1/4 TUBE × 1/4 NPT MALE 1

11 169618 ELBOW, .250 NPT 90 DEGREE 1

12 169619 FITTING, 1/4"TUBE OD 1

13 169682 TUBE, COPPER LOWER 1

14 169683 TUBE, COPPER TOP 1

15 169684 TUBE, COPPER JUMPER 1

16 169686 TUBE, WATER SUPPLY STAND ALONE UNIT 1

Not Shown

338475 TAPE, 1/2" X 520" TEFLON A/R

Table: PL-7 FTU-5 Water Supply Assembly Components

IPL-PH-FT-00217/16/2019

+ 28 hidden pages

Duke FTU-10 Parts List

Specifications and Main Features

Frequently Asked Questions

User Manual