MACH X-ray film viewer ST-series
X-RAY FILM VIEWER ST-SERIES
Dr. Mach
Lamps and Engineering
1 field, viewing area 36 x 43cm, 2x 15W....................................... Order no. 0022 0400 30
2 field, viewing area 83 x 43cm, 2x 25W....................................... Order no. 0022 0800 60
3 field, viewing area 121 x 43cm, 2x 36W..................................... Order no. 0022 1300 90
Dr. Mach
X-ray film viewer ST-series Edition 01 31.03.2003 / Bak page 1/8
GmbH u. Co., Flossmannstrasse 28, D-85560 Ebersberg
Tel.: +49 (0)8092 2093 0, Fax +49 (0)8092 2093 50
Internet: www.dr-mach.com, E-mail: info@dr-mach.de
MACH X-ray film viewer ST-series
Dr. Mach
Lamps and Engineering
List of contents
1. Safety instructions..................................................................................page 3
2. Mounting overview of the x-ray film viewer.............................................page 3
3. Operating the x-ray film viewer...............................................................page 4
4. Changing of spare parts .........................................................................page 5
4.1 Opening the x-ray film viewer...........................................................page 5
4.2 Changing the fuses ..........................................................................page 5
4.3 Changing the fluorescent lamps and the starter...............................page 6
4.4 Changing the adjustable nylon thread ..............................................page 6
4.5 Closing the x-ray film viewer ............................................................page 6
5. Spare parts.............................................................................................page 7
6. Spare parts list .......................................................................................page 8
X-ray film viewer ST-series Edition 01 31.03.2003 / Bak page 2/8
MACH X-ray film viewer ST-series
Dr. Mach
Lamps and Engineering
1. Safety instructions
Please pay attention to the directions for use when handling the x-ray film viewer.
The manufacturer is only responsible for the safety of the x-ray film viewers if repairs
and alterations have been carried out by himself or a company who can guarantee that
the safety regulations have been observed.
The manufacturer is not liable for personal or material damages if the x-ray film viewer
is misappropriately or incorrectly operated or misused.
2. Mounting overview of the x-ray film viewer
Exampe: x-ray film viewer with 2 fields, viewing area 83 x 43cm, 2x 25W
Film grip
Fluorescent lamp
ballast
Starter
Fluorescent lamp
25W
2 fuses
ON/OFF switch
Nylon thread Connecting cable
X-ray film viewer ST-series Edition 01 31.03.2003 / Bak page 3/8
MACH X-ray film viewer ST-series
3. Operating the x-ray film viewer
Dr. Mach
Lamps and Engineering
• After mounting the x-ray film viewer on the
wall using the enclosed safety dowels and
screws, remove the protective foils F at
the upper and bottom side of the viewer.
F
• Turn on the x-ray film viewer with the
switch 1.
• Fix the film with the film grip 2.
1
2
X-ray film viewer ST-series Edition 01 31.03.2003 / Bak page 4/8
MACH X-ray film viewer ST-series
4. Changing of spare parts
4
5
5
Dr. Mach
Lamps and Engineering
4.1 Opening the x-ray film viewer
Attention!
Unplug from mains.
• Slide down the adjustable nylon thread 4
taking care not to damage the front panel
5.
• Press down gently on the film grip 3 and
insert the tip of a thin flat head screw
driver between the grip and the housing.
• Release the film grip 3 together with pa-
nel 5 by prying it open with the screw
driver every few inches across the top.
• You may now carefully pull the panel 5 in
a flat angle upward out of its holding.
3
4.2 Changing the fuses
Attention!
Unplug from mains.
• Remove the fuse 6 off its mounting device
(eventually by using a screw driver).
• Mount the new fuse.
• Check the function of the fuse.
6
1 field / 2 x 15W
2 fields / 2 x 25W
3 fields / 2 x 36W
2 fuses 1A
2 fuses 1A
2 fuses 1A
X-ray film viewer ST-series Edition 01 31.03.2003 / Bak page 5/8
MACH X-ray film viewer ST-series
8
7
Dr. Mach
Lamps and Engineering
4.3 Changing the fluorescent lamps
and the starter
Attention!
Unplug from mains.
• Turn the fluorescent lamp 7 for approx.
90° to the left and pull it out off its mounting
device.
• Insert the new fluorescent lamp.
• Turn the fluorescent lamp for approx. 90° to
the right until it snaps in.
Turn the starter 8 for approx. 20° to the left
•
and remove it by pulling it forward.
• Insert the new starter.
• Turn the starter for approx. 20° to the right
until it snaps in.
4.4 Changing the nylon thread
• Loosen the two sliders 13 of the nylon
thread by using a screw driver.
13
• Exchange the nylon thread.
• Mount the two sliders of the nylon thread to
the lateral guidances of the x-ray film viewer, until they snap in.
4.5 Closing the x-ray film viewer
• Insert the front panel 5 in a flat angle at
the bottom part of the x-ray film viewer.
• Press the front panel 5 at the upper edge
of the x-ray film viewer against its housing,
until the panel snaps in.
X-ray film viewer ST-series Edition 01 31.03.2003 / Bak page 6/8
MACH X-ray film viewer ST-series
5. Spare parts
Dr. Mach
Lamps and Engineering
5
1,2,3
6
4 7 8,9,10
X-ray film viewer ST-series Edition 01 31.03.2003 / Bak page 7/8
MACH X-ray film viewer ST-series
6. Spare parts list
Dr. Mach
Lamps and Engineering
X-ray film viewer
Pos. Name
1 Fluorescent lamp 15W* 2
2 Fluorescent lamp 25W* 2
3 Fluorescent lamp 36W* 2
4 Fluorescent lamp ballast 1 2 2
5 Starter 2 2 2
6 ON/OFF switch 1 1 1
7 Fuse 1A 2 2 2
8 Nylon thread (short size) 1
9 Nylon thread (middle size) 1
10 Nylon thread (long size) 1
* We recommend the change of the entire set of fluorescent lamps, so the light quality remains
at a constant high level.
1 field 2 fields 3 fields
Qty. No. Qty. No. Qty. No.
X-ray film viewer ST-series Edition 01 31.03.2003 / Bak page 8/8
Loading...