The items supplied with your phone might vary depending on the software and accessories available in your region or offered by your service
provider. You can obtain additional accessories from your local Doro dealer. The supplied accessories provide the best performance with your
phone.
1.Earpiece
2.Display
3.Left selection button
4.Call button
5.Top 10 shortcut
6.Camera shortcut/Take photo
7.Voice mail
8.Microphone
9.International prefix/Symbols
10. Silent/Input method
11. Torch shortcut
12. Message shortcut
13. End call/Power on/off
14. Right selection button
15. Arrow buttons
16. Camera lens
17. Torch
18. External display
19. Assistance button
20. Loudspeaker
21. Volume control
22. Charging socket
23. Headset socket
24. Lanyard hold (lanyard is not
included)
English
Contents
Congratulations on your purchase ............................................................... 1
Get started..................................................................................................... 1
Insert SIM card, memory card and battery.......................................... 1
Charge the phone.................................................................................. 3
Save energy ........................................................................................... 4
Get to know your phone................................................................................ 4
Hearing aid compatibility ....................................................................60
Specific Absorption Rate (SAR) ..........................................................61
Correct disposal of this product .........................................................61
Correct disposal of batteries in this product .....................................62
Declaration of Conformity ...................................................................62
English
000000000000000000
Congratulations on your purchase
Easily call, send text messages and take and share pictures thanks to
widely separated, high contrast keys and a surprisingly large screen for a
phone this size. Also has Assistance button and Hearing Aid Compatibility.
For more information about accessories or other Doro products please
visit www.doro.com.
Get started
Tip: It is recommended to remove the protective plastic film from the
display to enhance the visibility.
Insert SIM card, memory card and battery
Remove the battery cover
Note! Since the SIM card holder and the
memory card holder are located beneath
the battery you need to turn off the phone
to insert or remove the cards.
IMPORTANT!
Be careful not to damage your
fingernails when you remove the battery
cover. Do not bend or twist the battery
cover excessively as it may be damaged.
1
English
G
B
Insert the SIM card (required) and the memory card (optional)
•Remove the battery if it is already
installed.
•Locate the SIM card holder and gently
slide the card in the holder. See the label right next to the holder for guidance on how to insert the card. If you
have problem to remove/replace the
SIM card, use adhesive tape on the
exposed part of the SIM card to pull it
out.
•Locate the SD card holder and gently
slide the card in the holder.
Note! The device works with or
without a SD card installed.
Tip: Take care not to scratch or bend the contacts on the memory card or
on the SIM card when inserting them into the card holders.
IMPORTANT!
This device accepts micro SIM or 3FF SIM card. Use of incompatible
SIM cards may damage the card or the device, and may corrupt data
stored on the card.
IMPORTANT!
Use only compatible memory cards with this device. Compatible card
type: microSD, microSDHC.
Incompatible cards may damage the card itself, the device and corrupt
any data stored on the card. Depending on the market some phones
may have a pre-installed memory card.
2
English
000000000000000000
A
B
Insert the battery and replace the battery cover
Insert the battery by sliding it into the battery
compartment with the contacts facing upwards to the left. Replace the battery cover.
Charge the phone
CAUTION
Only use batteries, chargers and accessories that have been approved
for use with this particular model. Connecting other accessories may
be dangerous and may invalidate the phone's type approval and
warranty.
When the battery is running low,is displayed and a warning signal is
heard.
3
English
1.Connect the mains adapter to a wall socket and to the charging
socket y (A) or place the device in the cradle (B). Alternatively
connect the cable to the charging socket y on the phone and to
a USB port on a computer.
The battery charge indicator is animated while charging. It takes approximately 3 hours to fully charge the battery. When the charger is
connected to the phone,
disconnected.
2.When charging is completed,
If the phone is turned off when the charger is connected to the
phone only the battery charge indicator will be shown on the display.
Note! To save power the LCD backlight goes off after a while. Press any
button to illuminate the display. Full battery capacity will not be reached
until the battery has been charged 3–4 times. Batteries degrade over
time, which means that call time and standby time will normally
decrease with regular use.
is displayed briefly, andwhen it is
is displayed on the screen.
Save energy
When you have fully charged the battery and disconnected the charger
from the device, unplug the charger from the wall socket.
Get to know your phone
Assistive functions
Use the symbols below to guide you through supporting sections in the
manual.
Seeing
Hearing
Handling
Safety
Turn the phone on and off
1.Press and holdon the phone to turn it on or off. Confirm with
Yes to power off.
2.If the SIM card is valid but protected with a PIN code (Personal Identification Number), PIN is displayed. Enter the PIN code and press
OK (
right corner of keypad).
upper left corner of keypad). Delete with Clear (upper
4
English
Note! If PIN and PUK codes were not provided with your SIM card, please
contact your service provider.
Attempts: # shows the number of PIN attempts left. When no more at-
tempts remain, PIN blocked is displayed. The SIM card must then be unlocked with the PUK code (Personal Unblocking Key).
1.Enter the PUK code and confirm with OK.
2.Enter a new PIN code and confirm with OK.
3.Re-enter new PIN code and confirm with OK.
Start-up wizard
When starting the phone for the first time, you can use the Start-up wizard to set some basic settings.
•Press Yes to change or No if you do not want to change.
The default language is determined by the SIM card. See Phone settings,
p.8 on how to change language, time and date.
Tip: You can run the start-up wizard later if you want. From standby
mode, press Menu
SettingsGeneralStart-up wizard.
Navigate the phone
Standby (idle mode)
When the phone is ready to use, and you have not keyed in any characters, the phone is in standby.
•Press
•Press left selection button
selection button
phonebook.
Tip: You can always press
Scroll
•Use the arrow buttons/to scroll in menus.
Step-by-step instructions
The arrow () indicates next action in step-by-step instructions. To confirm an action, press OK. To select an item, scroll or highlight the item using
/and then press OK.
to return to standby mode.
to access the phone Menu or right
Name to access your saved contacts in the
to return to standby.
5
Example:
English
•Press Menu
To perform the example on your Doro 6050 you should do the following:
1.Press Menu, scroll to Phonebook and press OK.
2.Select -New contact- and press Add.
Phonebook-New contact-Add.
External display
The external display shows the time, a number of status indicators, and
notifications for incoming calls. If the external display times out, press
and hold any of the side keys +/– to turn it back on.
Enter text
Enter text manually
Select character
•Press a numerical key repeatedly until the desired character is
shown. Wait a second before entering the next character from same
numerical key.
Special characters
1.Press*for a list of special characters.
2.Select the desired character with
/and press OK to confirm.
Move the cursor within text
•Use
Upper case, lower case and numerals
•Press#to choose between upper case, lower case and numerals.
See Input mode, p.7.
Change writing language
1.Press and hold#for a list of available languages.
2.Select language with
/to move the cursor within the text.
/and press OK to confirm.
Enter text with predictive text
In some languages you can use an input method which uses a dictionary
to suggest words.
6
English
•Press each key once, even if the displayed character is not the one
you want. The dictionary will suggest words based on the keys you
have pressed.
Example
1.Press3,7,3,3to write the word “Fred”. Complete the word before looking at the suggestions.
2.Use
/to view the suggested words.
3.Press Select and continue with the next word.
Alternatively, press0to continue with the next word.
4.If none of the suggested words are correct, use manual input mode.
To temporarily switch between predictive text and manual input
mode, press and hold*.
Note! See Predictive text, p.28 for more information.
Input mode
•Press#to change input mode. The icon on the top left of the dis-
play indicates the input mode.
Abc
ABC
abc
Abc
ABCUPPER CASE
abclower case
123
Sentence case with predictive text
UPPER CASE with predictive text
lower case with predictive text
Sentence case
Numerals
Hearing aid compatible
This phone is hearing aid compatible. Hearing aid compatibility is not a
guarantee that a specific hearing aid will work with a specific phone. Mobile phones contain radio transmitters that may interfere with hearing aid
performance. This phone has been tested for use with hearing aids, for
some of the wireless technologies that it uses, but there may be some
newer wireless technologies that have not been tested yet for use with
hearing aids. To ensure that a specific hearing aid works well with this
phone, test them together before making a purchase.
The standard for hearing aid compatibility contains two types of ratings:
7
English
•M: To use your hearing aid in this mode, make sure that your hearing
aid is set to "M-mode" or acoustic coupling mode, and position the
phones receiver near the hearing aid’s built-in microphone. For the
best results, try using the phone in different positions relative to your
hearing aid—for example, placing the receiver slightly above the ear
may result in better performance for hearing aids with microphones
positioned behind the ear.
•T: To use your hearing aid in this mode, make sure that your hearing
aid is set to "T-mode" or telecoil coupling mode (not all hearing aids
have this mode). For the best results, try using the phone in different
positions relative to your hearing aid—for example, placing the receiver slightly below or in front of the ear may result in better
performance.
See also Audio setup
, p.42 on how you can adjust the audio settings.
Phone settings
Time & date
Set the time and date
1.Press Menu
•Set time to enter the time (HH:MM).
•Set date to enter the date (DD/MM/YYYY).
2.Press OK to confirm.
Tip: You can also set the phone to automatically update the time and
date according to the current time zone. In Time & date select Auto time
On. Automatic update of date and time does not change the time you
have set for the alarm clock or the calendar. They are in local time.
Updating may cause some alarms you have set to expire depending on
network support and subscription.
Set the time and date format
1.Press Menu
format:
•Time format
•Date format and select the desired date format.
2.Press OK to confirm.
SettingsGeneralTime & date:
SettingsGeneralTime & dateSet
12 hours or 24 hours.
8
English
Language
The default language for the phone menus, messages, etc. is determined
by the SIM card. You can change this to any other language supported by
the phone.
1.Press Menu
2.Use
3.Press OK to confirm.
/to select a language.
SettingsGeneralLanguage.
Block function
1.Press MenuSettingsGeneralBlock function.
2.Select each function you want to disable and press Off.
3.Press Done to confirm.
PIN code options
1.Press MenuSettingsSecuritySIM lock:
•On to activate the PIN code. You need to enter the PIN code
every time the phone is started.
•Off to deactivate the PIN code.
IMPORTANT!
If enabling Off-mode and the SIM card is lost or stolen, it is
unprotected.
•Automatic to start the phone without the PIN code. The phone
remembers it automatically, but if the SIM card is moved to another phone (lost or stolen) the PIN code needs to be entered
when the phone is started.
2.Press OK to confirm.
Change PIN code
1.Press Menu
2.Enter current PIN code and press OK.
3.Enter new PIN and press OK. Repeat to confirm.
SettingsSecurityPasswordsPIN.
Phone lock
The phone lock protects your phone from unwanted usage. If activated,
phone is locked after restart and the phone code needs to be entered to
unlock.
9
English
1.Press MenuSettingsSecurityPhone lock.
2.Select On to enable, or Off to disable.
3.Press OK to confirm.
Note! You need to enter current phone code. Default phone code is 1234.
Blacklist
You can compile a blacklist of phone numbers so that any phone number
on your blacklist is blocked when calling or texting you.
Activate the function, add, remove or edit blacklist numbers
1.Press Menu
2.Select Activation.
•On to activate the function.
•Off to deactivate the function.
3.Select Number list.
4.Select Add
Alternatively, press Manual to add names or numbers manually.
5.Select the phone number and press Edit or Unblock.
6.Press OK to confirm.
SettingsPhonebookBlacklist.
Phonebook to add a contact from the phonebook.
Tip: When activated, you can add numbers directly from your call log, justpress Options
BlockYes.
Calls
Make a call
1.Enter the phone number including the area code. Delete with Clear.
2.Press
3.Press
Tip: For international calls, always use + before the country code for best
operation. Press*twice for the international prefix +.
to make a call. Press Abort to cancel the call.
to end the call.
Call from the phonebook
1.Press Name to open the phonebook.
2.Use
pressing the key corresponding to the first letter of the entry, see En-
ter text
/to scroll through the phonebook, or quick search by
, p.6.
10
English
3.Press OptionsCall to dial the selected entry. If needed, select
the number.
Alternatively, press
4.Press Abort or
to dial.
to cancel the call.
Receive a call
1.Open the flip and pressto answer.
Alternatively press Silent to switch off the ringsignal
or press
2.Press
To answer an incoming call by opening the flip, see Answer mode, p.13.
Tip: Press and hold +/– to temporarily switch off the ringsignal without
opening the flip.
/close the flip to reject directly (busy signal).
to end the call.
Volume control
During a call
•Use the side buttons +/– or
The volume level is indicated on the display.
If you use a hearing aid or have hearing difficulties when using the telephone in a noisy environment, you can adjust the phone's audio settings,
/to adjust the sound volume.
see Audio setup
, p.42.
Silent
Silent is a fixed profile with Keypad tone, Message tone and Ringtone disabled, while Vibration, Tasks, Daily reminder and Alarm are unchanged.
•Press and hold shortcut button#to activate or deactivate silent
mode.
Headset
When a headset is connected, the internal microphone in the phone is
automatically disconnected. If available, use the answer key on the headset to answer and end calls.
CAUTION
Using a headset at high volume may damage your hearing. Adjust the
volume level carefully when using a headset.
11
English
Call options
During a call the selection buttons1() give access to additional
functions.
Options (left selection button)
•Hold/Retrieve to hold/retrieve the current call.
•End single call to end the current call (same as
•New call to call another number (Conference).
•Phonebook to search the phonebook.
•Messages to write or read text messages.
•Mute to disable the microphone.
SPK on (right selection button)
The loudspeaker allows you to speak without holding the phone close to
the ear.
1.Press SPK on to activate. Speak clearly into the phone microphone
at a maximum distance of 1 m. Use
speaker volume.
2.Press SPK off to return to normal mode.
/to adjust the loud-
).
Note! Loud background noises (music, etc.) may interfere with the sound
quality.
SOS calls
As long as the phone is switched on, it is always possible to place an SOS
call by entering the main local emergency number for your present location followed by
Some networks accept calls to emergency numbers without a valid SIM
card. Contact your service provider for more information.
.
Call log
Received, missed and made calls are saved in a combinedcall log.
20 calls of each type can be stored in the log. For multiple calls related to
the same number, only the most recent call is saved.
1. Selection buttons have multiple functions. The current function is shown
above the selection button on the display.
12
English
1.Press.
Alternatively, press Menu
2.Use
/to select:
Received call
Dialled call
Missed call
Call log.
3.Pressto call, or Options:
•Call to call the contact.
•View to show details for the selected call.
•Send SMS to send a text message.
•Send MMS to send a picture message.
•Delete to delete the call.
•Delete all to delete all calls in the call log.
•Save to save the number in the phonebook
ate new contact, or Update update existing contact.
Call settings
Create new cre-
Call time
During a call, the duration of the call is shown. You can check the duration of your calls.
1.Press Menu
SettingsCallsCall time:
•Last call to show the elapsed time of the most recent call.
•Outgoing calls to show the elapsed time of all made calls.
•Received calls to show the elapsed time of all received calls.
•Reset all
Yes to reset all.
2.Press OK to confirm.
Answer mode
1.Press MenuSettingsCallsAnswer mode:
•Open to answerOn to answer incoming calls by opening the
flip.
•Any key
any key (exemption
On to be able to answer incoming calls by pressing
).
13
English
2.Press OK to confirm.
Call waiting
You can handle more than one call at a time, put the current call on hold
and answer the incoming call. When activated, an alert tone is heard if
there is an incoming call while talking.
•During a call, press Options
Answer.
Activate call waiting
1.Press Menu
2.Select Call waiting
SettingsCallsCall setup.
Activate.
3.Press OK to confirm.
Tip: Repeat and select Deactivate to disable call waiting, or Query status
to display if call waiting is active or not.
Call divert
You can divert calls to an answering service or to another phone number.
Set up which calls should be diverted. Select a condition and press OK,
then select Activate, Deactivate or Query status for each.
1.Press Menu
•Voice calls to divert all voice calls.
•Unreachable to divert incoming calls if the phone is turned off
or out of range.
•No reply to divert incoming calls if unanswered.
•If busy to divert incoming calls if the line is busy.
•Cancel diverts to cancel all call divert settings.
2.Press OK to confirm.
SettingsCallsCall setupCall divert:
Caller ID
Display or hide your phone number on the recipient's phone when you
call.
1.Press Menu
•Set by network to use default setting by the network.
•Hide ID to never show your number.
•Send ID to always show your number.
2.Press OK to confirm.
SettingsCallsCall setupCaller ID:
14
English
Call barring
Your phone can be restricted to disallow certain types of calls.
Note! A password is needed to apply call barring. Contact your service
provider to get the password.
1.Press Menu
SettingsCallsCall setupCall barring.
2.Select Outgoing calls:
•All calls to answer incoming calls but not calling.
•Internat.calls to block calls to international numbers.
•Int. except home to block international calls except to the coun-
try associated with the SIM card.
3.Press OK to confirm.
4.Select Incoming calls:
•All calls to call but not to receive incoming calls.
•When roaming to block incoming calls while roaming (operating
in other networks).
5.Press OK to confirm.
6.Select Cancel all to cancel all call barring (password needed). Press
OK to confirm.
Fixed dial (FDN)
You can limit calls to certain numbers saved on the SIM card. The list of
allowed numbers is protected by your PIN2-code.
Note! The PIN2-code is needed to apply fixed dial. Contact your service
provider to get the PIN2-code.
1.Press Menu
•Mode
•Fixed numbers
SettingsSecurityFixed dial:
On to enable or Off to disable.
Add and enter the first allowed number.Alternatively, select an entry and press Options
Delete.
2.If needed, enter PIN2 and press OK to confirm.
15
Add, Edit or
English
Note! You can save parts of phone numbers. For example, if you save
01234, allows calls to all numbers starting with 01234. It is possible to
place an SOS call by entering the main local emergency number followed
by
you are not allowed to view or manage any phone numbers saved on the
SIM card. You are not able to send any text messages either.
even when fixed dial is activated. When fixed dial is activated
Phonebook
Thephonebook can store 300 entries with 3 phone numbers in each
entry.
Add contact
1.Press MenuPhonebook-New contact-Add.
2.Enter a Name for the contact, see Enter textClear.
3.Use
number(s) including the area code.
4.Select E-mail to associate e-mail address to the contact, see E-mailsettings, p.32.
/to select Mobile, Home or Office and enter the phone
, p.6. Delete with
5.Select Picturenebook picture, p.18.
•Take picture to use the camera to take a picture.
•My pictures to select an existing picture.
6.Press Save.
Tip: For international calls, always use + before the country code for bestoperation. Press*twice for the international prefix +.
Edit to associate picture to the contact, see Pho-
Manage phonebook contacts
1.Press MenuPhonebook.
2.Select a contact, then press Options:
•View to show details for the selected contact.
age set to Phone and
book storage, p.17.
•Edit to edit the contact. Use
Press Save when done.
SIM = storage set to SIM, see Phone-
/to scroll. Delete with Clear.
16
Phone = stor-
Loading...
+ 47 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.