Future-proof your network with 100G uplink port
speeds, forwarding rates up to 1607 Mpps, 32 MB
packet buer and 2.16 Tbps switching bandwidth
Reliable Systems
Redundancy features including hot-swappable power
supplies and fan trays. Stack up to 12 switches to
operate as a single module, providing fault tolerance
and increasing network reliability
Flexible and Open Architecture
Support for multiple software images to t the need
in a datacenter or Enterprise/ISP network. Supports
SDN Openow v1.3 for an open networking setup
DXS-3610 Series
Layer 3 Stackable 10G Managed Switches
Features
High Performance and Flexibility
• Two hot-swappable power modules for 1+1
power redundancy and load sharing
• Hot-swappable fan trays with front-to-back
airow and N+1 cooling redundancy
• Up to 1200G stacking bandwidth with twelve
devices functioning together as a single unit
Data Center Features
• IEEE 802.1Qbb Priority-based Flow Control (PFC)
Advanced Features
• MPLS
• ERPS (G.8032 v1/v2)
• MACSec
• OpenFlow v1.3
OAM
• IEEE 802.3ah Ethernet link OAM
• IEEE 802.1ag
• ITU-T Y.1731
Accessible Management
• D-View, D-Link Network Assistant (DNA) utility,
web-based GUI, Command Line Interface
(CLI) through Telnet, SSH or RJ-45 Console/
Management Port
1
(DXS-3610-54T 10G BASE-T port only)
The D-Link DXS-3610 Series Layer 3 Stackable 10G Managed Switches are a set of new,
compact, high-performance switches that feature ultra-low latency, suitable for enterprise
and campus, as well as service provider’s aggregation network environments. Available in
two congurations, 48 x 10G Base-T or 10G SFP+ ports with 6 x 100G QSFP28 that can be
used either uplink or stacking congurations. The DXS-3610 Series is available with standard
as well as enhanced software images. The Standard Image features a wide range of Layer 2,
VLAN, multicasting, Quality of Service (QoS), security, data center, and static routing protocols
including RIP, VRRP and OSPF. The Enhanced Image features comprehensive IPv4/v6 routing,
including BGP and L3 multicasting features such as IGMP, MLD, PIM-DM, SM, SDM, SSM, and
DVMRP. The Enhanced Image also supports L2/L3 MPLS VPN, which enables the DXS-3610 Series
to be deployed as the core router of an enterprise environment, or as an aggregation switch
in an MPLS environment. Furthermore, the Switch Resource Management feature allows the
hardware table size to be dynamically adjusted. The DXS-3610 Series also supports essential
OpenFlow 1.3 features, enabling the switch to be managed through an OpenFlow controller.
Your network is the backbone of your business. Keeping it running is essential, even if the
unexpected happens. D-Link Assist is a rapid-response technical support service that replaces
faulty equipment quickly and eciently. Maximising your uptime and giving you the
condence that instant support is only a phone call away.
All D-Link products with 5-year or Limited Lifetime warranty come with complimentary Next
Business Day Service. D-Link will send out a replacement product to you on the next business
day after acceptance of a product failure. On receipt of the replacement product, you simply
arrange the return of the defective product to us. Any products with a 2-year/3-year warranty can
also benet from the Next Business Day advance replacement service when the optional 3-year
warranty extension has been purchased.
Find out more at eu.dlink.com/services
Page 2
Technical Specications
DXS-3610 Series Layer 3 Stackable 10G Managed Switches
General
Size
Interfaces
• 6 x 40/100GbE QSFP+/QSFP28 ports
Console Port• RJ-45 console port for out-of-band management
Management Port• 10/100/1000 BASE-T RJ-45 Ethernet for out-of-band remote management
USB Port• 1 x USB 2.0 Type A port
DXS-3610-54SDXS-3610-54T
• 19-inch, 1U rack-mount
• 48 x 1/10GbE SFP/SFP+ ports
• 48 x 1/10GbE Base-T ports
• 6 x 40/100 GbE QSFP+/QSFP28 ports
Performance
Switching Capacity• 2.16 Tbps
Max. Forwarding Rate• 1607.04 Mpps
Packet Buffer Memory• 32 MB
MAC Address Table
IPv4 Routing Table
IPv6 Routing Table
IPv4 Forwarding Table
IPv6 Forwarding Table
2
2
2
2
2
• Up to 288K
• Up to 32K
• Up to 16K
• Up to 144K
• Up to 144k
Jumbo Frame Size• 9436 bytes
Physical
Power Input• 1 + 1 redundant power supply design
Maximum Power
Consumption
Standby Power
Consumption
Heat Dissipation (Max.)• 1083 BTU/hr• 1126 BTU/hr
Acoustics• Max: 79.4 dB(A)
Fans• 5 x fans
Dimensions (W x L x H)
Weight• 9.80 kg• 9.88 kg
Operating Temperature• 0 to 45 °C
Storage Temperature• -40 to 70 °C
Operating Humidity• 0% to 95% RH
Storage Humidity• 0% to 95% RH
• 320.8 W• 330.2 W
• 120.6 W• 108.2 W
• Min: 65.3 dB(A)
• Input: 100 to 240 V AC, 50/60 Hz
• Max: 76.6 dB(A)
• Min: 69.7 dB(A)
• 441.0 x 487.44 x 43.5 mm
MTBF• 94,262 hours• TBD
Certications
Safety• CB, cUL, LVD
EMI/EMC• FCC, CE, C-Tick, IC, VCCI
Page 3
Standard Image (SI) Features
DXS-3610 Series Layer 3 Stackable 10G Managed Switches
Stackability• Virtual Stacking/Clustering of up to 32 units
DEM-432XT• 10GBASE-LR SFP+ transceiver (w/o DDM), 10 km
Optional 1G SFP Transceivers
4
DEM-310GT• 1000BASE-LX SFP transceiver, single-mode fiber, 10 km, 3.3 V operating voltage
DEM-311GT• 1000BASE-SX SFP transceiver, multi-mode fiber, 550 m, 3.3 V operating voltage
DEM-312GT2• 1000BASE-SX SFP transceiver multi-mode fiber, 2 km, 3.3 V operating voltage
DGS-712• 1000BASE-TX SFP transceiver
Optional 100G QSFP28 Direct Attach Cables
DEM-CB100Q28 • 100G QSFP28 to QSFP28 1 m Direct Attach Cable
Optional 40G QSFP+ Direct Attach Cables
DEM-CB300QXS• 40G QSFP+ to QSFP+ 3 m Direct Attach Cable
Optional 10G SFP+ Direct Attach Cables
DEM-CB100S• 10G SFP+ to SFP+ 1 m Direct Attach Cable
DEM-CB300S• 10G SFP+ to SFP+ 3 m Direct Attach Cable
1
Will be supported in future releases.
2
Based on maximum value of Switch Resource Management (SRM)
3
Table is shared between all multicast functions
4
Only supports full duplex mode
For more information: www.dlink.com
D-Link European Headquarters. D-Link (Europe) Ltd., First Floor, Artemis Building, Odyssey Business Park, West End Road, South Ruislip HA4 6QE, United Kingdom.