D Link DWL700AP-A2, DWL700AP-A1 User Manual
Getting Started
k
r
A
Setting Up an Infrastructure Network
Please refer to the following sections
of this manual for additional
information about setting up a network:
Networking Basics- learn how to
check your IP Address; share printers
and files.
Using the Configuration Utility- learn
the settings you must use on each
computer in your network for
successful communication.
Troubleshooting- learn how to chec
for the proper installation of the
network adapters’ drivers and othe
tips for troubleshooting the network.
700AP
Please remember that D-Link AirPlus wireless devices are pre-configured to
connect together, right out of the box, with the default settings.
You will need a broadband Internet access (Cable/DSL)
subscription.
Consult with your Cable/DSL provider for proper installation of the
modem.
Connect the modem to an Ethernet Broadband Router (such as the
D-Link DI-604) See the Quick Installation Guide included with the
DI-604.
Connect the router to the D-Link AirPlus DWL-700AP. Refer to
the Quick Installation Guide for setting up the DWL-700AP.
If you are connecting a desktop computer in your network, you can
install the D-Link AirPlus DWL-520+ wireless PCI adapter into an
available PCI slot. See the Quick Installation Guide included with the
DWL-520+.
Install the drivers for the wireless cardbus adapter (D-Link
irPlus DWL-650+) into the laptop computer. See the Quick
Installation Guide included with the DWL-650+ for installation
instructions.
11
Getting Started
Setting Up an 802.1x Network
700AP
700AP
Here is a sample of a network setup using the 802.1x compliant DWL-700AP access
point.Your network may look different. For successful communication, you will need 802.1x
compliant devices, including 802.1x compliant wireless network adapters. If you are
using two or more access points in conjunction for load-balancing or backup, please
remember to keep the ethernet cable connection between the access points. An ethernet
connection is needed so that IAPP (Inter Access Point Protocol) can be used to enable
these functions.
Please read through the configuration section of this manual to learn about the settings
you will need for your devices to achieve a faster, safer and more effective wireless netÂwork than you have previously experienced.
12
Loading...