D-LINK DXS36154T Datasheet
Highlights
High Performance
Future-proof your network with 100G uplink port speeds,
forwarding rates up to 1607 Mpps, 32 MB packet buer and
2.16 Tbps switching bandwidth
Reliable Systems
Redundancy features, including hot-swappable power
supplies and redundant fan trays maximize the availability
of your network. Stack up to 12 switches to operate as a
single module, providing fault tolerance and increasing
network reliability
Flexible and Open Architecture
Support for multiple software images to t the need in
a datacenter or Enterprise/ISP network. Supports SDN
Openow v1.3 and ONIE for an open networking approach
DXS-3610 Series
Layer 3 Stackable 10G Managed Switches
Features
High Performance and Flexibility
• Two AC/DC hot-swappable power modules for
1+1 power redundancy and load sharing
• Hot-swappable fan trays with front-to-back
airow and N+1 cooling redundancy
• Up to 1200G stacking bandwidth with twelve
devices functioning together as a single unit
Data Center Features
• IEEE 802.1Qbb Priority-based Flow Control (PFC)
Advanced Features
• MPLS
• ERPS (G.8032 v1/v2)
• MACSec
• OpenFlow v1.3
OAM
• IEEE 802.3ah Ethernet link OAM
• IEEE 802.1ag
• ITU-T Y.1731
Accessible Management
• Web-based GUI, Command Line Interface (CLI)
1
(DXS-3610-54T 10G BASE-T port only)
The D-Link DXS-3610 Series Layer 3 Stackable 10G Managed Switches are a set of new,
compact, high-performance switches that feature ultra low latency, with 10G Ethernet
switching and routing. The 1U height and front-to-back airow make the DXS-3610 Series
suitable for Enterprise and campus aggregation network environments. The DXS-3610 Series is
available in two congurations; 48 xed 10G SFP+ with 6 xed 100G QSFP28 and 48 xed 10G
Base-T with 6 xed 100G QSFP28. 100G ports allow for either uplink or stacking congurations,
depending on your system’s needs.
Performance, Availability and Redundancy
The DXS-3610 Series boasts high-performance 10G Ethernet switching capacity of up to 2.16
Tbps with forwarding rates of up to 1607 Mpps. This switch series features hot-swappable
power supplies and fan trays to provide a redundant, high-availability architecture. The
modular power design allows network administrators to use either AC or DC power sources
for maximum deployment exibility. When using two power modules, the power load is
distributed, extending the lifetime of the modules. The DXS-3610 Series also features a modular
fan back-up design, providing n+1 redundancy for the system. Safeguarding against fan failure
or rising temperatures, smart fans automatically adjust their speed.
Flexible Software
The DXS-3610 Series can be deployed using one of two dierent software images. The Standard
Image (SI) features a wide range of Layer 2, VLAN, multicasting, Quality of Service (QoS),
security, data center, and static routing protocols including RIP, VRRP and OSPF. The Enhanced
Image (EI) features comprehensive IPv4/v6 routing including BGP and L3 multicasting features
such as IGMP, MLD, PIM-DM, SM, SDM, SSM, and DVMRP. The Enhanced Image (EI) also supports
L2/L3 MPLS VPN, which enables the DXS-3610 Series to be deployed as the core router of an
enterprise environment, or as an aggregation switch in an MPLS environment. The Switch
DXS-3610 Series Layer 3 Stackable 10G Managed Switches
Resource Management (SRM) feature allows the hardware table size to be
dynamically adjusted, so that switch functions can be optimized based on
the use of the switch. There are 3 modes: IP Mode, LAN Mode, and L2 VPN
Mode. These modes modify the size of the Layer 2 and 3 tables for optimum
eciency.
Software-Dened Networking
By supporting software-dened networking (SDN), the DXS-3610 Series
gives network operators more exibility and control by providing new ways
to design, build and manage their networks. As a streamlined approach to
network management, SDN separates the control plane from the data plane,
where the control plane manages infrastructure by utilizing open protocols
such as OpenFlow. The DXS-3610 Series with SDN can help build centrally
managed agile networks, abstract cloud resources and simplify network
operations.
Switch and Link Failover
In addition to traditional Spanning Tree Protocol (STP), Rapid Spanning
Tree Protocol (RSTP), and Multiple Spanning Tree Protocol (MSTP), the
DXS-3610 Series also supports advanced Ethernet failover redundancy
technologies, such as Ethernet Ring Protection Switching (ERPS) and FlexLink.
ERPS provides millisecond-level failover in a ring topology, while FlexLink
oers link failover on designated switch ports, providing link redundancy
without STP or LBD.
Advanced Security and Reliability
The DXS-3610 Series provides a complete set of security features, including
multi-layer Access Control Lists (ACLs) and 802.1X user authentication via
TACACS+ and RADIUS. The DXS-3610 Series also oers extensive VLAN
support, including GVRP and 802.1Q VLAN to enhance security and
performance. A robust set of QoS features help ensure that critical network
services such as Voice over IP and video conferences are given high priority on
the network. The D-Link Safeguard Engine increases the switches’ reliability,
serviceability, and availability by preventing trac ooding caused by
malicious attacks.
Versatile Management
The DXS-3610 Series utilizes the D-Link Network Assistant (DNA) utility, an
industry-standard CLI with an intuitive web-based management interface
that enables administrators to set up and remotely manage their networks.
Support for SNMP allows centralized management of a large number of
devices and out-of-band management is available via a dedicated console
port. The DXS-3610 Series can be managed through the RJ-45 console port,
without any additional connections, while the USB Type A port can connect
to storage devices to save logs, conguration settings, and rmware images.
The DHCP auto-conguration and auto-image features enable deployment
of multiple switches automatically, saving costs for mass deployment. The
DXS-3610 Series employs essential OpenFlow 1.3 features, enabling the
switch to be managed through an OpenFlow controller.
Technical Specications
DXS-3610 Series Layer 3 Stackable 10G Managed Switches
General
Size
Interfaces
Console Port • RJ-45 console port for out-of-band management
Management Port • 10/100/1000 BASE-T RJ-45 Ethernet for out-of-band remote management
Alarm Port • 1 x RJ-45 port
USB Port • 1 x USB 2.0 Type A port
• 48 x 1/10GbE SFP/SFP+ ports
• 6 x 40/100GbE QSFP+/QSFP28 ports
DXS-3610-54S DXS-3610-54T
• 19-inch, 1U rack-mount
• 48 x 1/10GbE Base-T ports
• 6 x 40/100 GbE QSFP+/QSFP28 ports
Performance
Switching Capacity • 2.16 Tbps
Max. Forwarding Rate • 1607.04 Mpps
Packet Buffer Memory • 32 MB
MAC Address Table
IPv4 Routing Table
IPv6 Routing Table
IPv4 Forwarding Table
IPv6 Forwarding Table
2
2
2
2
2
• Up to 288K
• Up to 32K
• Up to 16K
• Up to 144K
• Up to 144k
Jumbo Frame Size • 9436 bytes
Physical
Power Input • 1 + 1 redundant power supply design
Maximum Power
Consumption
Standby Power
Consumption
Heat Dissipation (Max.) • 1083 BTU/hr • 1126 BTU/hr
Acoustics • Max: 79.4 dB(A)
Fans • 5 x fans
Dimensions (W x L x H)
Weight • 9.80 kg (21.61 lbs) • 9.88 kg (21.78 lbs)
Operating Temperature • 0 to 45 °C (32 to 113 °F)
Storage Temperature • -40 to 70 °C (-40 to 158 °F)
Operating Humidity • 0% to 95% RH
• 320.8 W • 330.2 W
• 120.6 W • 108.2 W
• Min: 65.3 dB(A)
• Input: 100 to 240 V AC, 50/60 Hz
• Max: 76.6 dB(A)
• Min: 69.7 dB(A)
• 441.0 x 487.44 x 43.5 mm (17.36 x 19.19 x 1.71 in)
Storage Humidity • 0% to 95% RH
MTBF • 94,262 hours • TBD
Certications
Safety • CB, cUL, LVD
EMI/EMC • FCC, CE, C-Tick, IC, VCCI
Loading...