D-link DES-6505 BROCHURE
Chassis Switch
For Enterprise Network Connection
9-Slot Modular Layer 3 Switch Chassis
Configurable With High Density Gigabit Ports
10-Gigabit Uplink Modules
160Gbps Switch Fabric
Advanced Software Features
FEATURES
=========
Modular Flexibility
9-Slot Modular Chassis
1 CPU & 8 Line Card Slots
Up to 16 10-Gigabit Ports
Up to 96 Gigabit Ports
Up to 192 10/100Mbps Ethernet Ports
Up to 96 Fiber Ethernet Ports
Redundant Power Supply
High Performance Switching
160Gbps Switch Fabric
142Mpps Forwarding Rate
32 Trunk Groups, 8 Ports Per Group
9216Bytes Jumbo Frames
3K IP Addresses
16K MAC Addresses
4K VLANs
8 Priority Queues
Advanced Features
RIP v.1/v.2, OSPF
IGMP v.3, DVMRP, PIM-DM
VRRP
RADIUS, TACACS+, SSL/SSH
L2/L3/L4 CoS/ACL
Up to 100 ACL Per Port
802.1d/802.1w/802.1s
802.1Q, GARP/GVRP
Bandwidth Control
Broadcast/Multicast Storm Control
Safeguard Engine
STP Loopback Detection
FEATURES
he DES-6500 L3 chassis switch brings configuration flexibility and price/performance ratio
T
necessary for deployment of a cost-effective enterprise, backbone and campus network. This
chassis provides a high density of Gigabit ports, 10-Gigabit support, high switch fabric
capacity, fault tolerance, Quality of Service (QoS), and network security critical for enterprise
applications.
Wire-speed IP Packet Routing. Using standards-based routing, the DES-6500 provides
instant support for Windows, Unix and Internet environments. Built-in wire-speed nonblocking switch fabric provides hardware-based packet filtering/forwarding.
High Gigabit/10-Gigabit Port Density. Users can configure this chassis with up to 96 Gigabit
ports, 16 10-Gigabit ports, 192 10/100Mbps Ethernet ports, 96 fiber Ethernet ports, or a
combination of these. With 8 line card slots and a wide range of selectable port types, users
can easily add and change modules to suit their requirements.
Security, Performance & Availability. The DES-6500 series provides extensive VLAN support
including GARP/GVRP, 802.1Q and asymmetric VLAN to enhance security and performance.
To support converged applications including VoIP, ERP, Intranet and video conference, a
robust set of L2/L3/L4 QoS/CoS features ensures that critical network services are served
with proper priority. With Multi-layer L2/L3/L4 bandwidth control and D-Link Safeguard
Engine, DES-6500 series can set limits to traffic flows from the edge of the network while
automatically prevents broadcast packets and bulk traffic generated by Internet DoS-related
activities from utilizing the switch's CPU resources. This prevention of unnecessary and
harmful traffic can increase the overall network serviceability, reliability and availability of the
stack.
Advanced Enterprise Features. The DES-6500 supports IP (RIP, OSPF) and IGMP, DVMRP,
and PIM multicasting for logical network segmentation and traffic control. It also supports a
complete set of Spanning Tree Protocols (STP), Rapid Spanning Tree Protocol (RSTP), and
Multiple Spanning Tree Protocol for Layer 2 redundancy.
Comprehensive Management. The DES-6500 supports a variety of network management
options including console CLI, Telnet configuration, web-based and SNMP management,
RMON monitoring and Single IP Management. The DES-6500 also supports a variety of
advanced traffic management options including bandwidth control and broadcast/multicast
storm control.
1
DES-6500
Technical Specifications
Hardware
Port Standard/Function Support
Fully compliant with IEEE 802.3/802.3u/802.3ab/802.3z
802.3ae standards
ANSI/IEEE 802.3 NWay auto-negotiation
MDI/MDI-X auto-detection
IEEE 802.3x flow control in full-duplex, back pressure in
Half-duplex
DES-6500 Chassis System
Number of user-configurable slots: 8
2 redundant power supply bays
Back plane switch fabric bandwidth: 160Gbps
Up to 16 10-Gigabit Ports
Up to 96 Gigabit Ports
Up to 192 10/100Mbps Ethernet Ports
Up to 96 Fiber Ethernet Ports
Up to 3K IP address table, up to 16K MAC address table,
4K VLAN (max.)
8 Priority Queues
32 Trunking Group, 8 ports per group
RAM buffer: 128MB per line card, 256MB for CPU card
DES-6505 8-Port 1000BASE-SX Fiber SC Module
Fully compliant with IEEE 802.3z standard
802.3x flow control in full-duplex
Fiber cables: 50, 62.5/125-micron multi-mode
fiber
LED report (per por t): Link/Act
DES-6506 24-port RJ-21 to RJ-45 Patch Panel
Patch panel supports 2 RJ-21 ports to 24-por t RJ-45
10/100 BASE-TX interface
Compatible with the DES-6510 RJ-21 Telco module
Use in conjunction with DES-6510 module
Supports 2 RJ-21/Telco 50 connectors
DES-6507 12-Port 10/100/1000BASE-T + 2 SFP
Combo Module
DES-6509 12-Slot SFP Module
Fully compliant with IEEE 802.3z standard
802.3x flow control in full-duplex
Fiber cables: 50, 62.5/125-micron multi-mode fiber, 9 micron single-mode fiber
LED report (per por t): Link/Act
DES-6510 24 Port 10/100Mbps RJ-21 Telco 50
Module
2 RJ-21, each supports 12-port 10BASE-T/100BASE-TX
ports
Fully compliant with IEEE 802.3 10BASE-T, IEEE 802.3u
100BASE-TX standards
All 10/100Mbps ports suppor t auto-negotiation
Back pressure for half-duplex mode
802.3x flow control support for full-duplex
DES-6502 CPU/Fabric Switching Module
(Shipped with DES-6500)
RS-232 console port
Reset, alarm off buttons
System, Power LEDs
160Gbps switching capacity
Up to 142 Mpps forwarding rate
256MB SDRAM
512KB for boot codes and 16MB for runtime codes
DES-6504 12-Port 100BASE-FX MMF LC Module
Fully compliant with IEEE 802.3u 100BASE-FX standard
IEEE 802.3x compliant flow control support for full duplex
Supports (SFF) LC type connections
Cable distances up to 2km in full duplex on multi-mode
fiber
Fully compliant with IEEE 802.3/802.3u/802.3ab/802.3z
standards
ANSI/IEEE 802.3 NWay auto-negotiation
MDI/MDI-X auto-detection
IEEE 802.3x flow control in full-duplex
10BASE-T copper cable:
2-pair UTP Cat. 3, 4, 5 cable (100m max)
EIA/TIA-568 100-ohm STP cable (100m max.)
100BASE-TX/1000BASE-T copper cable:
2-pair or 4 pair UTP CAT 5 or better (100m max.)
EIA/TIA-568 100-ohm STP cable (100m max.)
Fiber cables: 50, 62.5/125-micron multi-mode fiber, 9 micron single-mode fiber
LED report (per por t): Link/Act
DES-6508 16-Port 10/100Mbps RJ-45 Module
Fully compliant with IEEE 802.3 10BASE-T, IEEE 802.3u
100BASE-TX standards
All 10/100Mbps ports suppor t auto-negotiation
Back pressure support for half-duplex mode
802.3x compliant flow control support for full-duplex
DES-6511 Power Supply
Full redundant feature design
Hot-swappable power source
Power management function enabled
2 fans included
Removable handle design
Input: 90 to 264 VAC, 47 to 63 Hz
Output: 3.4V: 4A to 80 A; 12V: 0.1A to 2A
DES-6512 2-Slot 10G XFP Module
Compliant with IEEE 802.3ae standard
Supports full-duplex operation only
Supports XFP MSA-compliant transceivers
256MB SDRAM
Flash: 512KB for boot codes, 16MB for runtime codes
LED indicators
2
DES-6500
Loading...