DES-1009G
8-Port 10/100M
with 1-Port 10/100/1000M
Gigabit Ethernet Switch
User’s Guide
Rev.02 (Oct. 2004)
6012-9600090
Printed In Taiwan
RECYCLABLE
LIMITED WARRANTY
D-Link Systems, Inc. (“D-Link”) provides this limited warranty for its product
only to the person or entity who originally purchased the product from D-Link
or its authorized reseller or distributor.
Limited Hardware Warranty: D-Link warrants that the hardware portion
of the D-Link products described below (“Hardware”) will be free from
material defects in workmanship and materials from the date of original
retail purchase of the Hardware, for the period set forth below applicable
to the product type (“Warranty Period”) if the Hardware is used and
serviced in accordance with applicable documentation.
Product Type Warranty Period
Product (excluding power supplies
and fans), if purchased and delivered
in the fifty (50) United States, or the
District of Columbia (“USA”)
Product purchased or delivered
outside the USA
Power Supplies and Fans One (1) Year
Spare Parts and spare kits
As long as the original purchaser
still owns the product.
One (1) Year
Ninety (90) days
D-Link’s sole obligation shall be to repair or replace the defective Hardware at
no charge to the original owner. Such repair or replacement will be rendered
by D-Link at an Authorized D-Link Service Office. The replacement Hardware
need not be new or of an identical make, model or part; D-Link may in its
discretion may replace the defective Hardware (or any part thereof) with any
reconditioned product that D-Link reasonably determines is substantially
equivalent (or superior) in all material respects to the defective Hardware. The
Warranty Period shall extend for an additional ninety (90) days after any
repaired or replaced Hardware is delivered. If a material defect is incapable of
correction, or if D-Link determines in its sole discretion that it is not practical
to repair or replace the defective Hardware, the price paid by the original
purchaser for the defective Hardware will be refunded by D-Link upon return
to D-Link of the defective Hardware. All Hardware (or part thereof) that is
replaced by D-Link, or for which the purchase price is refunded, shall become
the property of D-Link upon replacement or refund.
Limited Software Warranty: D-Link warrants that the software portion of
the product (“Software”) will substantially conform to D-Link’s then current
functional specifications for the Software, as set forth in the applicable
documentation, from the date of original delivery of the Software for a period of
ninety (90) days (“Warranty Period”), if the Software is properly installed on
approved hardware and operated as contemplated in its documentation.
D-Link further warrants that, during the Warranty Period, the magnetic media
on which D-Link delivers the Software will be free of physical defects. D-Link’s
sole obligation shall be to replace the non-conforming Software (or defective
media) with software that substantially conforms to D-Link’s functional
specifications for the Software. Except as otherwise agreed by D-Link in
writing, the replacement Software is provided only to the original licensee, and
is subject to the terms and conditions of the license granted by D-Link for the
Software. The Warranty Period shall extend for an additional ninety (90) days
after any replacement Software is delivered. If a material non-conformance is
incapable of correction, or if D-Link determines in its sole discretion that it is
not practical to replace the non-conforming Software, the price paid by the
original licensee for the non-conforming Software will be refunded by D-Link;
provided that the non-conforming Software (and all copies thereof) is first
returned to D-Link. The license granted respecting any Software for which a
refund is given automatically terminates.
What You Must Do For Warranty Service:
Submitting A Claim
submitted in writing before the end of the Warranty Period to an Authorized D-
Link Service Office. The claim must include a written description of the
Hardware defect or Software nonconformance in sufficient detail to allow D-
Link to confirm the same. The original product owner must obtain a Return
Material Authorization (RMA) number from the Authorized D-Link Service
Office and, if requested, provide written proof of purchase of the product (such
as a copy of the dated purchase invoice for the product) before the warranty
service is provided. After an RMA number is issued, the defective product must
be packaged securely in the original or other suitable shipping package to
ensure that it will not be damaged in transit, and the RMA number must be
prominently marked on the outside of the package. The packaged product shall
be insured and shipped to D-Link, 17595 Mt. Herrmann, Fountain Valley, CA 92708
with all shipping costs prepaid. D-Link may reject or return any product
that is not packaged and shipped in strict compliance with the foregoing
requirements, or for which an RMA number is not visible from the outside of the
package. The product owner agrees to pay D-Link’s reasonable handling and
return shipping charges for any product that is not packaged and shipped in
accordance with the foregoing requirements, or that is determined by D-Link not to
defective or non-conforming.
be
What Is Not Covered:
This limited warranty provided by D-Link does not cover
Products that have been subjected to abuse, accident, alteration, modification,
tampering, negligence, misuse, faulty installation, lack of reasonable care,
repair or service in any way that is not contemplated in the documentation for
. Any claim under this limited warranty must be
:
the product, or if the model or serial number has been altered, tampered with,
defaced or removed;
Initial installation, installation and removal of the product for repair, and
shipping costs;
Operational adjustments covered in the operating manual for the product, and
normal maintenance;
Damage that occurs in shipment, due to act of God, failures due to power surge,
and cosmetic damage; and
Any hardware, software, firmware or other products or services provided by
anyone other than D-Link.
Disclaimer of Other Warranties: EXCEPT FOR THE LIMITED
WARRANTY SPECIFIED HEREIN, THE PRODUCT IS PROVIDED “AS-IS”
WITHOUT ANY WARRANTY OF ANY KIND INCLUDING, WITHOUT
LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NON-INFRINGEMENT. IF ANY IMPLIED
WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A
PRODUCT IS SOLD, THE DURATION OF SUCH IMPLIED WARRANTY
SHALL BE LIMITED TO NINETY (90) DAYS. EXCEPT AS EXPRESSLY
COVERED UNDER THE LIMITED WARRANTY PROVIDED HEREIN, THE
ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE
OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT.
Limitation of Liability: TO THE MAXIMUM EXTENT PERMITTED BY LAW,
D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT
LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF
USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY
CHARACTER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR
LOSS OF GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR
MALFUNCTION, LOSS OF INFORMATION OR DATA CONTAINED IN,
STORED ON, OR INTEGRATED WITH ANY PRODUCT RETURNED TO D-
LINK FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE
PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF
ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE
REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS
REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NON-
CONFORMING PRODUCT.
GOVERNING LAW: This Limited Warranty shall be governed by the laws of
the state of California.
Some states do not allow exclusion or limitation of incidental or consequential
damages, or limitations on how long an implied warranty lasts, so the foregoing
limitations and exclusions may not apply. This limited warranty provides specific
legal rights and the product owner may also have other rights which vary from
state to state.
Trademarks
Copyright 1999 D-Link Corporation. Contents subject to change without prior notice. D-
Link is a registered trademark of D-Link Corporation/D-Link Systems, Inc. All other
trademarks belong to their respective proprietors.
Copyright Statement
No part of this publication may be reproduced in any form or by any means or
used to make any derivative such as translation, transformation, or adaptation
without permission from D-Link Corporation/D-Link Systems Inc., as
stipulated by the United States Copyright Act of 1976.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with this user’s guide, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
CE Mark Warning
This is a Class B product. In a domestic environment, this product may cause radio
interference in which case the user may be required to take adequate measures.
VCCI Warning
T
ABLE OF CONTENTS
ABOUT THIS GUIDE.............................................................1
T
O
.....................................................................................1
ERMS
VERVIEW OF THIS USER’S GUIDE
...........................................1
INTRODUCTION....................................................................2
G
IGABIT ETHERNET TECHNOLOGY
AST ETHERNET TECHNOLOGY
F
WITCHING TECHNOLOGY
S
EATURES
F
................................................................................5
........................................................4
...........................................2
................................................3
Ports ....................................................................................5
Performance features ..........................................................5
UNPACKING AND SETUP ...................................................6
NPACKING
U
ETUP
S
ESKTOP OR SHELF INSTALLATION
D
ONNECTING NETWORK CABLE
C
OWER ON
P
.............................................................................6
......................................................................................7
..........................................7
...............................................8
................................................................................8
IDENTIFYING EXTERNAL COMPONENTS....................9
F
RONT PANEL
EAR PANEL
R
NDICATORS
LED I
..........................................................................9
..........................................................................10
..................................................................11
TECHNICAL SPECIFICATIONS ......................................13
2
BOUT THIS GUIDE
A
This user’s guide tells you how to install your DES-1009G
Gigabit Ethernet Switch, and how to connect it to your network.
Terms
For simplicity, this documentation uses the terms “Switch” (first
letter upper case) to refer to the DES-1009G Gigabit Ethernet
Switch, and “switch” (first letter lower case) to refer to all
Ethernet switches, including the DES-1009G Gigabit Ethernet
Switch.
Overview of this User’s Guide
♦
Chapter 1,
♦
Chapter 2,
the basic installation of the Switch.
♦
Chapter 3,
front panel, rear panel, and LED indicators of the Switch.
♦
Chapter 4,
the Switch to your Ethernet network.
♦
Appendix A,
specifications of the DES-1009G Gigabit Ethernet Switch.
Introduction
Unpacking and Setup
Identifying External Components
Connecting the Switch
Technical Specifications
. Describes the Switch and its features.
. Helps you get started with
. Tells how you can connect
. Lists the technical
. Describes the
1
NTRODUCTION
I
This section describes the features of the DES-1009G Gigabit
Ethernet Switch, as well as giving some background information
about Gigabit Ethernet, Fast Ethernet and Switching technology.
Gigabit Ethernet Technology
Gigabit Ethernet is an extension of IEEE 802.3 Ethernet utilizing
the same packet structure, format, and support for CSMA/CD
protocol, full duplex, flow control, and management objects, but
with a tenfold increase in theoretical throughput over 100-Mbps
Fast Ethernet and a hundredfold increase over 10-Mbps Ethernet.
Since it is compatible with all 10-Mbps and 100-Mbps Ethernet
environments, Gigabit Ethernet provides a straightforward
upgrade supplementing the company’s existing investment in
hardware, software, and trained personnel.
The increased speed and extra bandwidth offered by Gigabit
Ethernet is essential to coping with the network bottlenecks that
frequently develop as computers and their busses get faster and
more users use applications that generate more traffic. Upgrading
key components, such as your backbone and servers to Gigabit
Ethernet will greatly improve network response times as well as
significantly speed up the traffic between your subnets.
Gigabit Ethernet enables fast optical fiber connections to support
video conferencing, complex imaging, and similar data-intensive
applications. Likewise, since data transfers occur 10 times faster
than Fast Ethernet, servers outfitted with Gigabit Ethernet NIC’s
are able to perform 10 times the number of operations in the same
amount of time.
2
In addition, the phenomenal bandwidth delivered by Gigabit
Ethernet is the most cost-effective method to take advantage of
today and tomorrow’s rapidly improving switching and routing
internetworking technologies. And with expected advances in the
coming years in silicon technology and digital signal processing
that will enable Gigabit Ethernet to eventually operate over
unshielded twisted-pair (UTP) cabling, outfitting your network
with a powerful 1000-Mbps-capable backbone/server connection
creates a flexible foundation for the next generation of network
technology products.
Fast Ethernet Technology
The growing importance of LANs and the increasing complexity
of desktop computing applications are fueling the need for high
performance networks. A number of high-speed LAN
technologies have been proposed to provide greater bandwidth and
improve client/server response times. Among them, 100BASE-T
(Fast Ethernet) provides a non-disruptive, smooth evolution from
the current 10BASE-T technology. The non-disruptive and
smooth evolution nature, and the dominating potential market
base, virtually guarantee cost effective and high performance Fast
Ethernet solutions in the years to come.
100Mbps Fast Ethernet is a new standard specified by the IEEE
802.3 LAN committee. It is an extension of the 10Mbps Ethernet
standard with the ability to transmit and receive data at 100Mbps,
while maintaining the CSMA/CD Ethernet protocol. Since the
100Mbps Fast Ethernet is compatible with all other 10Mbps
Ethernet environments, it provides a straightforward upgrade and
takes advantage of the existing investment in hardware, software,
and personnel training.
3
Switching Technology
Another key development pushing the limits of Ethernet
technology is in the field of switching technology. A switch
bridges Ethernet packets at the MAC address level of the Ethernet
protocol transmitting among connected Ethernet or fast Ethernet
LAN segments.
Switching is a cost-effective way of increasing the total network
capacity available to users on a local area network. A switch
increases capacity and decreases network loading by making it
possible for a local area network to be divided into different
segments
transmission capacity, giving a decreased load on each.
The switch acts as a high-speed selective bridge between the
individual segments. Traffic that needs to go from one segment to
another is automatically forwarded by the switch, without
interfering with any other segments. This allows the total network
capacity to be multiplied, while still maintaining the same network
cabling and adapter cards.
Switching LAN technology is a marked improvement over the
previous generation of network bridges, which were characterized
by higher latencies. Routers have also been used to segment local
area networks, but the cost of a router and the setup and
maintenance required make routers relatively impractical. Today’s
switches are an ideal solution to most kinds of local area network
congestion problems.
which don’t compete with each other for network
4
Features
The DES-1009G Gigabit Ethernet Switch was designed for easy
installation and high performance in an environment where traffic
on the network and the number of users increase continuously.
Switch features include:
Ports
♦ One 10/100/1000Mbps NWay Gigabit Ethernet port (port 9).
♦ Eight 10/100Mbps NWay Ethernet ports (port 1 ~ 8).
♦ One 10/100/Mbps NWay MDI-X Uplink port, share with port 8.
Performance features
♦ Store and forward switching scheme capability to support rate
adaptation and protocol conversion.
♦ Full duplex to allow two communicating stations to transmit and
receive at the same time.
♦ Wire-speed data forwarding rate for each port.
♦ Wire-speed data filtering rate for each port.
♦ 4K active MAC address entry table per device with automatic
learning and aging.
♦ 2M bits packet buffer per device.
♦ Supports broadcast storm rate filtering
5
NPACKING AND SETUP
U
This chapter provides unpacking and setup information for the
Switch.
Unpacking
Open the shipping carton of the Switch and carefully unpack its
contents. The carton should contain the following items:
♦ One 8-Port 10/100 Mbps, 1-Port 10/100/1000Mbps NWay
Gigabit Ethernet Switch
♦ Four rubber feet with adhesive backing
♦ One AC power cord
♦ One User’s Guide
If any item is found missing or damaged, please contact your local
reseller for replacement.
6
Setup
The setup of the Switch can be performed using the following
steps:
♦
The surface must support at least 5 kgs.
♦
The power outlet should be within 1.82 meters (6 feet) of the
device.
♦
Visually inspect the power cord and see that it is secured fully
to the AC power connector.
♦
Make sure that there is proper heat dissipation from and
adequate ventilation around the Switch. Do not place heavy
objects on the Switch.
Desktop or Shelf Installation
When installing the Switch on a desktop or shelf, the rubber feet
included with the device must be first attached. Attach these
cushioning feet on the bottom at each corner of the device. Allow
enough ventilation space between the device and the objects
around it.
Figure 2-1. Gigabit Ethernet Switch installed on a Desktop or Shelf
7
Connecting Network Cable
The DES-1009G Gigabit Ethernet Switch supports one
10/100/1000Mbps NWay Gigabit Ethernet port and eight
10/100Mbps NWay Fast Ethernet ports. Port 1 to port 8 support
10Mbps Ethernet or 100Mbps Fast Ethernet and it runs both in
half and full duplex mode. Port 9 is a NWay Gigabit Ethernet port,
it supports 10Mbps, 100Mbps and 1000Mbps, it runs both half
duplex and full duplex while it’s running in 10Mbps or 100Mbps,
but it can only run full duplex mode in 1000Mbps.
Note: For having best connection, please check your connecting speed.
Port 1 to port 8 are MDI-X type port, you can use standard cable
to connect to the NIC. If you want to connect to the hub or switch,
you have to connect the uplink port to the other hub’s MDI-X type
port by using the standard cable.
Port 9 is Auto-MDI type ports, this port can auto transform to
MDI-II or MDI-X type, so you can just make an easy connection
without worrying if you are using a standard or crossover cable.
Power on
The DES-1009G Gigabit Ethernet Switch can be used with AC
power sources 100 - 240 VAC, 50 - 60 Hz. The Switch’s power
supply will adjust to the local power source automatically and may
be turned on without having any or all LAN segment cables
connected.
8
DENTIFYING EXTERNAL COMPONENTS
I
This chapter describes the front panel, rear panel and LED
indicators of the Switch.
Front Panel
The front panel of the Switch consists of 8 10/100Mbps NWay
Ethernet ports, 1 10/100/1000Mbps NWay Gigabit Ethernet port,
and LED indicators.
Figure 3-1. Front panel view of the DES-1009G Gigabit Ethernet Switch
♦ One 10/100/1000Mbps NWay Gigabit Ethernet port (port 9).
♦ Eight 10/100Mbps NWay Ethernet ports (port 1 ~ 8).
♦ One 10/100Mbps MDI-II Uplink port, share with port 8.
♦ Comprehensive LED indicators that display the conditions of the
Switch and status of the network. A description of these LED
indicators follows (see
LED Indicators
).
9
Rear Panel
The rear panel of the Switch consists of an AC power connector.
The following shows the rear panel of the Switch.
Figure 3-2. Rear panel view of the DES-1009G Gigabit Ethernet Switch
♦ AC Power Connector
This is a three-pronged connector that
supports the power cord. Plug in the female connector of the
provided power cord into this connector, and the male into a
power outlet. Supported input voltages range from 100 ~ 240
VAC at 50 ~ 60 Hz
.
10
LED Indicators
The LED indicators of the Switch include Power, ALERT, HTTP,
ICQ, SMTP, SPEED, LINK/ACT and FDX/COL. The following
shows the LED indicators for the Switch along with an
explanation of each indicator.
Figure 3-4. The DES-1009G Gigabit Ethernet Switch LED indicators
♦ POWER:
After turning on the power, the Power indicator on
the front panel should light to indicate the Switch is receiving
power.
♦ ALERT:
When power is on, the alert will light up, after selftesting , the light turns off. If the led always light up, then it
means that there is some problem, please contact your dealer.
♦ HTTP:
When this indicator is blinking green, the HTTP
packets (Web browser) are transmitting or received on the
Switch.
11
♦ ICQ:
♦ SMTP:
♦ SPEED:
♦ LINK/ACT:
♦ FDX/COL:
When this indicator is blinking green, the ICQ (Online
chat program) packets are transmitting or received on the
Switch.
When this indicator is blinking green, the SMTP
packets (E-Mail) are transmitting or received on the Switch.
The indicator lights amber when the port is
connected to 1000Mbps Gigabit Ethernet station, and the
indicator lights green when the port is connected to 100Mbps
Fast Ethernet station. Otherwise, this indicator remains off
when the port is connected to a 10Mbps Ethernet station.
This indicator light is green when this port is
connected to a station successful, if this indicator blinking
green means this port will be transmitting or received data on
the network.
This LED indicator light is green when a
respective port is in full duplex (FDX) mode. Otherwise, it is
blinking green when collisions are occurring on the respective
port.
12
p
ECHNICAL SPECIFICATIONS
T
General
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
Standards:
Protocol: CSMA/CD
Data
Transfer
Rate:
Topology Star
Network
Cables:
Number of
Ports:
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
ANSI/IEEE 802.3 NWay Auto-negotiation
IEEE 802.3x Full du
Ethernet: 10Mbps (half-duplex), 20Mbps (full-duplex)
Fast Ethernet: 100Mbps (half-duplex), 200Mbps (full-duplex)
Gigabit Ethernet: 1000Mbps (half-duplex), 2000Mbps (full-duplex)
Ethernet: 2-pair UTP Cat. 3,4,5 , EIA/TIA- 568 100-ohm STP
Fast Ethernet: 2-pair UTP Cat. 5, EIA/TIA-568 100-ohm STP
Gigabit Ethernet: 4-pair UTP Cat. 5, EIA/TIA-568 100-ohm STP
8 x 10/100Mbps NWay Ethernet MDI-X port
1 x 10/100/1000Mbps NWay Gigabit Ethernet Auto-MDI port
1 x 10/100Mbps NWay Ethernet MDI-II port, share with port 8
(Uplink port)
lex Flow Control
13
Physical and Environmental
AC inputs:
Power Consumption: 30 watts maximum
Operating Temperature: 0 ~ 50 degrees Celsius
Storage Temperature: -5 ~ 55 degree Celsius
Humidity: 5% ~ 95% RH, non-condensing
Dimensions: 280 mm x 180 mm x 44 mm
EMI:
Safety: UL (UL 1950), TUV/GS (EN60950)
100 – 240 VAC, 50/60 Hz (internal
universal power supply)
FCC Class B, CE Mark Class B, VCCI
Class B
Performance
Transmission Method: Store-and-forward
RAM Buffer: 2M bits per device
Filtering Address Table: 4K MAC address per device
Ethernet: 14880pps
Packet Filtering/Forwarding Rate:
MAC Address Learning: Self-learning, auto-aging
Fast Ethernet: 148800pps
Gigabit Ethernet: 1488000pps
14
Loading...