D Link D1614-PLUS Users Manual

AirPlus DI-614+

Enhanced 2.4 GHz Wireless Broadband Router

Manual

Rev. 070502

Building Networks for People

Contents

1.

Package Contents ............................................. 3

2. Introduction........................................................ 4

3. Wireless Basics ................................................. 7

4. Getting Started ................................................ 10

5. Using the Configuration Menu......................... 12

6. Troubleshooting............................................... 33

7. Networking Basics........................................... 38

8. Technical Specifications .................................. 70

9. Contacting Technical Support.......................... 72

10. Warranty and Registration............................... 73

2

1. Package Contents

Contents of Package:

• D-Link AirPlus DI-614+ Enhanced 2.4GHz Wireless Access Point

• Power Adapter – 5V DC, 2.5A

• Manual on CD

• Quick Installation Guide

Note: Using a power supply with a different voltage rating than the one included with

the DI-614+ will cause damage and void the warranty for this product.

If any of the above items are missing, please contact your reseller.

• Computer with a Windows, Macintosh, or Linux based operating
system with an installed Ethernet adapter

• Internet Explorer or Netscape Navigator, version 4.0 or above, with
JavaScript enabled

System Requirements:

2. Introduction

The D-Link AirPlus DI-614+ Wireless Broadband Router is an enhanced

802.11b high-performance, wireless router. It is an ideal way to extend the
reach and number of computers connected to your wireless network.

Unlike most 802.11b routers, the DI-614+ is capable of data transfer speeds
up to 22 Mbps (compared to the standard 11 Mbps) when used with other D­Link AirPlus products such as the DWL-520+ Wireless PCI Adapter.

After completing the steps outlined in the Quick Installation Guide (included
in your package) you will have the ability to share information and resources,
such as files and printers, and enjoy the freedom that wireless networking
delivers.

The DI-614+ is compatible with most popular operating systems, including
Macintosh, Linux and Windows, and can be integrated into a large network.
This Manual is designed to help you connect the Router and the D-Link

AirPlus 2.4GHz Wireless Adapters into a network in Infrastructure mode.
Please take a look at the Getting Started section in this manual to see an
example of an Infrastructure network using the DI-614+.

This manual provides a quick introduction to wireless technology and its
application as it relates to networking. Please take a moment to read
through this manual and get acquainted with wireless technology.

Connections

Ports 1-4 WAN Reset Power

4

Reset: Used to restore the DI-614+ to the factory default settings
Power: Connect one end of the included power adapter into the power port

and the other end into the power outlet.
WAN: WAN port socket (CAT5 Ethernet RJ-45 cable.) Connect your Cable

or DSL modem.
PORTS 1-4: LAN port sockets (CAT5 Ethernet RJ-45 cable.) The LED

glows steadily when a port is connected to a hub, switch or network-adapter­equipped computer in the local area network.

Features and Benefits

• Connects multiple computers to a Broadband (Cable or DSL) modem
to share the Internet connection

• Supports VPN pass-through, providing added security

• Advanced Firewall features

• DHCP server supported enables all networked computers to

automatically receive IP addresses

• Up to 2x faster with other AirPlus products with speeds up to 22Mbps

• Web-based interface for Managing and Configuring

• Access Control to manage users on the network

• Supports special applications that require multiple connections

• Operates in the 2.4GHz frequency range

• Maximum reliability, throughput and connectivity with automatic data

rate switching.

• Stronger network security with 256-bit encryption.

LEDS

M1 LED -

A solid light
indicates that the
DI-614+ is ready.

M2 LED -

A solid light indicates that
the unit is defective.

WAN LED -

A solid light
indicates
connection on the
WAN port. This
LED blinks during
data transmission.

POWER LED -

A solid light
indicates a proper
connection to the
power supply.

WLAN LED -

A solid light
indicates that the
wireless segment
is ready. This
LED blinks
during wireless
data
transmission.

6

LOCAL
NETWORK LED -

A solid light
indicates a
connection to an
Ethernet-enabled
computer on ports
1-4. This LED
blinks during data
transmission.

3. Wireless Basics

D-Link AirPlus wireless products are based on industry standards to provide
easy-to-use and compatible high-speed wireless connectivity within your
home, business or public access wireless networks. Strictly adhering to the
IEEE standard, the D-Link AirPlus wireless family of products will allow you
to access the data you want, when and where you want it. You will be able to
enjoy the freedom that wireless networking delivers.

A wireless local area network (WLAN) is a cellular computer network that
transmits and receives data with radio signals instead of wires. Wireless
LANs are used increasingly in both home and office environments, and
public areas such as airports, coffee shops and universities. Innovative ways
to utilize WLAN technology are helping people to work and communicate
more efficiently. Increased mobility and the absence of cabling and other
fixed infrastructure have proven to be beneficial for many users.

Wireless users can use the same applications they use on a wired network.
Wireless adapter cards used on laptop and desktop systems, support the
same protocols as Ethernet adapter cards.

Under many circumstances, it may be desirable for mobile network devices
to link to a conventional Ethernet LAN in order to use servers, printers or an
Internet connection supplied through the wired LAN. A Wireless Access
Point (AP) is a device used to provide this link.

People use wireless LAN technology for many different purposes:

Mobility - Productivity increases when people have access to data in any
location within the operating range of the WLAN. Management decisions
based on real-time information can significantly improve worker efficiency.

Low Implementation Costs – WLANs (Wireless Local Area Networks) are
easy to set up, manage, change and relocate. Networks that frequently
change, both physically and logically, can benefit from WLANs ease of
implementation. WLANs can operate in locations where installation of wiring
may be impractical.

Installation Speed and Simplicity - Installing a wireless LAN system can
be fast and easy and can eliminate the need to pull cable through walls and
ceilings.

Wireless Basics

Network Expansion - Wireless technology allows the network to go where

wires cannot go.

Reduced Cost-of-Ownership - While the initial investment required for
wireless LAN hardware might be higher than the cost of wired LAN hardware,
overall installation expenses and life-cycle costs will be significantly lower.
Long-term cost benefits are greatest in dynamic environments requiring
frequent moves, adds, and changes.

Scalability – Wireless Local Area Networks (WLANs) can be configured in a
variety of topologies to meet the needs of specific applications and
installations. Configurations are easily changed and range from peer-to-peer
networks suitable for a small number of users to full infrastructure networks
of thousands of users that allow roaming over a broad area.

D-Link AirPlus Wireless Family of LAN products include:

 Enhanced 2.4GHz Wireless Cardbus Adapters used with laptop

computers (DWL-650+)

 Enhanced 2.4GHz Wireless PCI cards used with desktop computers

(DWL-520+)

 Enhanced 2.4GHz Wireless Router and Access Point (DI-614+,DWL-

900AP+)

The DI-614+ is also compatible with the D-Link Air 802.11b family of
products, which include:

 2.4GHz Wireless Cardbus Adapters used with laptop computers

(DWL-650)

 2.4GHz Wireless PCI cards used with desktop computers (DWL-520)

 Wireless Router/Access Point/Print Servers (DI-713P)

 Wireless Access Points (DWL-1000AP, DWL-900AP)

Standards - Based Technology

The IEEE standard-based technology assures that the D-Link AirPlus
Products are interoperable with existing compatible 2.4GHz wireless
technology. This means you will be able to transfer large files quickly or
even watch a movie in MPEG format over your network without noticeable
delays. The technology works by using multiple frequencies in the 2.4GHz
range at speeds up to 22 Mbps. D-Link AirPlus products will automatically

8

Wireless Basics

sense the best possible connection speed to ensure the greatest speed and
range possible with the technology.

Installation Considerations

Designed to go up to 1,312 feet (400 meters) outdoors and up to 328 feet
(100 meters) indoors, D-Link AirPlus DI-614+ lets you access your network
with your laptop computer from virtually anywhere. Keep in mind, however,
that the number, thickness and location of walls, ceilings or other objects that
the wireless signals must pass thru may limit range. Typical ranges vary
depending on the types of materials and background RF (radio frequency)
noise in your home or business. The key to maximizing range is to follow
these basic guidelines:

1.

Keep the number of walls and ceilings between the wireless Access
Point and your receiving device (e.g., the DWL-650+) to a minimum ­Each wall or ceiling can reduce your D-Link Air Wireless product’s range
from 3-90 feet (1-30 meters.) Position your Access Points, Residential
Gateways, and computers so that the number of walls or ceilings is
minimized.

2. Be aware of the direct line between Access Points, Residential
Gateways (routers) and computers. A wall that is 1.5 feet thick (.5
meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick.
At a 2-degree angle it looks over 42 feet (14 meters) thick! Try to make
sure that the Access Points and adapters are positioned so that the
signal will travel straight through a wall or ceiling for better reception.

3. Building Materials make a difference - A solid metal door or aluminum
studs may have a negative effect on range. Try to position Access Points,
and computers with wireless adapters so that the signal passes through
drywall or open doorways and not other materials.

4. Make sure that the device’s antenna is positioned for best reception by
using the software signal strength tools included with your product.

5. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical

devices or appliances that may generate extreme RF noise.

For the average home, signal range should not be an issue. If you
experience low or no signal strength in areas of your home that you wish to
access, consider positioning the Access Point in a location directly between
the computers with wireless adapters. Additional Access Points can be
connected to provide better coverage in rooms where the signal does not
appear as strong as desired.

4. Getting Started

f

Right out of the box, with its default settings, the DI-614+ will

automatically connect with other D-Link Air or AirPlus products.

For the price of a single IP Address from your Broadband Internet Service
provider you can share the Internet with all the computers on your local
network, without sacrificing speed or security, using D-Link AirPlus
networking products.

IP ADDRESS

Please note: If you have a DHCP-capable router, such as the

D-Link DI-614+, there is no need to assign an IP Address.

If you need to assign IP Addresses to the computers on the
network, please remember that the IP Address for each

computer must be in the same IP Address range as all the
computers in the network, and the Subnet mask must be exactly

the same for all the computers in the network.

For example: If the first computer is assigned an IP Address o

192.168.0.2 with a Subnet Mask of 255.255.255.0, then the second
computer can be assigned an IP Address of 192.168.0.3 with a
Subnet Mask of 255.255.255.0, etc.

IMPORTANT: If computers or other devices are assigned the
same IP Address, one or more of the devices may not be
visible on the network.

The Infrastructure Network example shown on the following page contains
the following D-Link network devices:

A wireless Broadband Router - D-Link AirPlus DI-614+
A laptop computer with a wireless adapter - D-Link AirPlus DWL-650+
A desktop computer with a wireless adapter - D-Link AirPlus DWL-520+
A Cable modem - D-Link DCM-200

DHCP stands for Dynamic Host Configuration Protocol.

It is a protocol for assigning dynamic IP addresses “automatically.”

With a DHCP-capable gateway/router, there is

no need to manually assign an IP address.

10