OWNER'S MANUAL
Operating and Servicing
Instructions
Please read these
instructions carefully
before using your cleaner.
Let us help you put your
vacuum together or
answer any questions call:
1o800o321o1134
(USA & Canada
www.dirtdevil.com
WARNING
Cleaner assembly may
include small parts.
Small parts can present
a choking hazard.
For quick reference, pRease record your
vacuum information bemow,
Modem #:
Mfg. Code:
(Mfg. codelocatedon the lower backsideo[ cleaner)
Espa_o/o pagina E1
@2003All rights reserved # 1z113169z000
5/03
THISCLEANERJSINTENDEDFORHOUSEHOLDUSEONLY.
mNPORTANTSAFETY mNSTRUCTmONS
When you use an appliance, basic precautions shouH be followed,
including the following:
• READALL INSTRUCTIONSBEFOREUSING THE APPLIANCE.
• ALWAYS FOLLOW THESESAFETYmNSTRUCTmONS.
• BRING CLEANERTO UPRIGHTPOSITIONWHEN USING THE HOSEAND
ATTACHMENTS.
• DO NOT LEAVECLEANERUNATTENDEDWHEN PLUGGEDraN.
• REGULARLYCHECKTHE FmLTERSTO CLEANOR REPLACE.
• WARNmNG:DO NOTUSE SHARP OBJECTSTO CLEANOUT THE HOSEStaNCE
THEY COULDCAUSEDAMAGE.
• OCCASmONALLYREMOVEBRUSHAND CLEANDEBRmSFROM ENDCAPSTO
KEEPBRUSHROTATmNGSMOOTHLY.
• WARNmNG:THECORDS, WmRES,AND/ORCABLESSUPPMEDWroTHTHINS
PRODUCTCONTAINSCHEMmCALS,INCLUDINGLEADORLEAD COMPOUNDS,
KNOWNTO THESTATEOF CALIFORNIATO CAUSECANCERAND BIRTH
DEFECTSOR OTHERREPRODUCTIVEHARM. WASHHANDSAFTERUSING.
READALLINSTRUCTIONSBEFOREUSINGTHEAPPLIANCE,
TOREDUCETHERISKOFFIRE,
ELECTRICSHOCKORINJURY:
Do not leaveappliance when plugged in, Unplug from outlet when not in use
and before servicing,
Do not use outdoors or on wet surfaces, Electrical shock could occur.
Do not allow to be used as a toy. Close attention is necessary when used by
or near children,
Use only as described in this manual. Use only manufacturer's recommend-
ed attachments.
Do not use with damaged cord or plug, If appliance is not working as it
should, has been dropped, damaged, left outdoors, or dropped into water,
return it to a service center for inspection. Call 1-800-321-1134 for the near-
est service center,
Do not pull or carry by cord, use cord as handle, close a door on cord, or
pull cord around sharp edges or corners. Do not run appliance over cord.
Keep cord away from heated surfaces,
Do not unplug by pulling on cord, To unplug, grasp the plug, not the cord.
Do not handle plug or appliance with wet hands,
Do not put any objects into openings. Do not use with any opening blocked;
keep flee of dust, lint, hair, and anything that may reduce air flow.
Keephair,looseclothing,fingers,andallpartsofbodyawayfromopenings
andmovingparts.
Donotpickupanythingthatis burningor smoking,suchascigarettes,
matches,orhotashes.
Donotusewithoutdirtcontainerandfiltersinplace.
Turnoffallcontrolsbeforeunplugging,
Useextracarewhencleaningonstairs.
Donotusetopickupflammableor combustibleliquids,suchasgasoline,
oruseinareaswheretheymaybepresent.
Keepthevacuumcleaneronthefloor.Onlythehand-heldvacuumcleaners
maybesetonfurniture.
Cleanermustbeintheuprightpositiontolifttherotatingbrushoffthecar-
petwhendoingabovefloorcleaning.
Donotuseanextensioncordwiththisvacuumcleaner.
Storethevacuumcleanerindoors.Putthevacuumcleanerawayafteruse
topreventtrippingaccidents.
Usingimpropervoltagemayresultin damageto themotorandpossible
injurytotheuser.Propervoltageislistedonthecleanerplate.
UnplugbeforeconnectingTurboTool".
Ifunintendedoperationof thepropulsionshouldoccur-Returnthecleaner
handletothefulluprightpositionand/orturnoffpowertothecleaneratthe
footpedalswitch.
SAVETHESEINSTRUCTIONS
WARNmNG'.
To reduce the risk of electric shock, this appliance has a polarized plug (one blade
wider than the other), This plug will fit in a polarizedoutlet only one way, If the plug
does not fit fully in the outlet, reversethe plug, If it still does not fit, contact aquali-
fied electrician to install the proper outlet, Do not change the plug in any way,
CONGRATULATIONS
You are now the proud owner of a Dirt DeviF. We trust _our new
purchase will bring )ou man)' )ears of satisfaction.
Our company designed and developed this product with you in mind.
The Self=Propelled vacuum takes the eflbrt out of pushing and adjusts
to your cleaning pace, thanks to its advanced Electronic Drive System.
Simply set the control switch to your desired speed and the vacuum will
easily move along with you, in both f_rward and reverse directions.
For effortless cleaning with total control, nothing beats a Dirt Devil :s:
Self-Propelled vacuum!
Thank }ou fiw }our support of Dirt DeviP products.
Visit our website at www.dirtdevil.com
TABLE OF CONTENTS
Safety Instructions ............................................ Page 2, 3
Feature Descriptions ........................................ Page 5
How to Assemble ............................................. Page 6
How To Operate ............................................... Page 6, 7
Floor/Carpet Cleaning ................................ Page 7
Self-Propelled Feature ................................ Page 7
Above Floor Cleaning ................................. Page 7
Dirt Container & Filtration: Removal
and Replacement ...................................... Page 8, 9
Belt or Brush: Removal & Replacement .......... Page 9, 10
Lightbulb: Removal & Replacement ................. Page 10
General Maintenance ....................................... Page 11
Troubleshooting Guide ..................................... Page 12
Tothe consumer,RoyalAppliance Mfg. Co.warrants this vacuum cleaner to befree of defectsin materi-
al or workmanship commencing upon the date of the original purchase, Refer to your vacuum cleaner
carton for the length ofwarrant_/and saveyour original sales receipt to validatestart of warranty period,
Ifthe vacuum cleaner should become defectivewithin the warranty period, we will repair or replace any
defective parts free of charge. The complete machine must be delivered _ to any ROYAL
Authorized Sales & Warranty Service Station, Please include complete description of the problem, day
of purchase, copy of original sales receipt and your name, address and telephone number, If you are
not near aWarranty Station, call the factor,/for assistance at USA & Canada:
1-800-321-1134, Use only genuine Royal replacement parts,
The warranty does not include unusual wear,damage resulting from accident or unreasonable use of
the vacuum cleaner. This warranty does not cover brushes, flat belts, filters and bulbs. This warranty
does not cover unauthorized repairs, This warranty gives you specific legal rights and you may also
haveother rights (Other rights may vary from state to state in the USA),
FRONT VIEW
BACK ViEW
--21
i 3 4
16-- _ 5 6
15-- 7
14-- __8
1 11
12
FRONTVtEW
1, Handle Grip
2. Handle
3, Turbo Toot"'
4, Crevice Tool (inside extension wand)
5. Extension Wand
& Dirt Cup Lid
7, See Through Dirt Cup
8. Dirt Cup Filter
9= Height Adjust Lever
10, Self-Propelled (E-Drive) Speed Switch
11, Headlight
12. Bumper
13, Clear Dirt Path Window
14, Lower Hose
15, Hose Wand
16, DirtCap Release Latch
25
BACK VtEW
l& Self-Propel Switch
17. Hose Caddy
l& Hose
l& Dust Brush
20, Cord Guide
21, Cord Wrap withQuick Cord Release
22. Carrying Handle
23, Long Power Cord
24, Lower Cord Wrap
25, Wheels
2& Handle Release Pedal
27, OnlOff Pedal
2& Back Panel
29, Hose Clip
TOOLREQUIRED:PHILLIPSORFLATHEADSCREWDRIVER
Guidepowercordintoopen-
ing,Slideupperhandleinto
turbotoolcaddy,
INSTALLTURBOTOOLr=
Insert handle fastener into
the back of the turbo tool
caddy.
SECUREBACK HOSE
Insert the one (1) screw into
the front and tighten until
secure.
TOOL STORAGE
'gW%i:S / _::=_
Clip turbo tool onto the front
of theturbo tool caddy,
Wrap hose around back of
hose caddy (Diagram 1),
Push hose wand down into
the right side of cleaner
(Diagram la),
Attach tools: (a) Slide the
dust brush onto post on the
upper tool caddy with bris-
tles facing out. (b) Slide the
extension wand/crevice tool
into round slot on the front
right side of tool caddy,
CAUTION:Brushagitatorcontinuestorotate whilehose[sremovedor in useandat all times"whiledeoner is'on. Keep
hair,loose elo#lir_, fingers,andalI partsof bodyaway frombrusharea whilecleaneris on
Cleanermustbe intheupright positionto lilt the rotationbrush(_fflhe carpetwhencleaningabovethe floor.
CORD RELEASE HEIGHT ADJUST KNOB
_-_--s_) Turn quick Cord
Releasefor easycord .........Nil _, JJl I knob to match the
removal, Store cord ! _t!'11_7_ surface being
in cord guide (see cleaned, NOTE: For
Features- pg. 5) to I _l_--_ easiest ao_ustment,
keep out of the way j_" _)'/,_ place eleoner in full
__ whilevacuur'ning. /t_ "_ < ' upright position.
ONIOFF PEDAL
HANDLE RELEASE
PEDAL
FLOOR/CARPET
CLEANmNG
Plug cord into electrical out-
let, Turn cleaner on by
depressing foot pedal Iocab
ed on the back left side of the
cleaner,
To release handle, push the
handle releasepedal located
on the lower left side of the
cleaner,
TO OPERATESELF@ROPELLED FEATURE
Move the handle and adjust it
to the desiredposition for (a)
storing the upright, (b) oper-
ating the cleaner,and (c) de-
pressthe handlereleasepedal
againtoclean underfurniture.
For everyday use, engage self-pro-
pelled feature by turning switch up
to the "ON" position (Diagram 1),
Grasp handle grip and push vacuum
(Diagram la),
"Self-Propelled" feature
will work as vacuum is
pushed forward and pulled
backward.
Adjust speed selector (locat-
ed on the nozzle)to preferred
speed (slow/fast). This fea-
ture optimizes the self pro-
pelled drive system, vacuum
speed and carpetheight,
TO DISENGAGE SELF-PROPELLED FEATURE
ABOVEFLOORCLEAMNG
Cleaner must be in its
upright position to raise
brushroll,
EXTENSmON WAND
Remove the hose from the
tool caddy.
Choose
any of the
handy
acces-
sories or
use the
hose
alone,
Simply
push the
attachment firmly onto the end of the
wand or hose handle, To remove tool,
twist and pull apart gently.
CARRY HANDLE
WARNING:TO REDUCETHE RISK OFINJURY FROMMOVING PARTS- UNPLUGBEFORESERVICING,
For filter replacement (Part # 2-JC0288-000) please ca{I 1-800-321-1134 or visit www,dirtdevil.com to
locate a dealer nearest you,
NOTE: Unplug cbaner befi_re changing filter:
NOTE: For best pertorTnance, replace filter yearly.
E_J]PTYAND CLEAN DmRTCONTAmNER
Grasp latch and top of dirt
cup, Squeeze latch and pull
cup and lid straight out to
remove,
Remove lid by grasping dirt
cup handle and turning lid
counterclockwise,
Hold the dirt container and
grasp the top of filter, Twist
and pull the filter up andout,
Cleanfilterandempty
dirt containercom-
pletely,See"Regular
Maintenance"note
belowforinstructions
oncleaningthefilter.
Returnfiltertodirtcon-
tainer,Pushfilterinto
placetopreventdirt
leakage.
Alignslotsonlidwith Returndirtcon-
tabsoncup(Diagram6). tainertocleaner,
Pushtheliddownand Setaligningtabon
twistclockwise.NOTE: bottomofdirtcup
Ttr_mis a guide Irrru on into retangular
backd lid.Alrgn line with slot on cleaner
arfow on thedrrt cup arrd (inset), and push
turn clockwise until to snap into place.
TOOLREQUIRED:PHILLIPSSCREWDRIVER
WARNING:TO REDUCETHERISK OF INJURYFROM MOVING PARTS- UNPLUGCLEANERBEFORE
CHANGII1GBELTOR BRUSHROLL.
ToREMovEBELT IBEL
and race up,
To remove
nozzle guard,
use Phillips
screwdriver to remove the five (5) screws,
Arrows show location of screws,
Lift nozzle guard off,
Lift and remove brushroll.
Dispose of old belt,
TO REPLACE BEETOR BRLISHROLL
Slide belt onto motorshaft.
Place new belt in area of
brushroll without bristles.
With new belt in place, pull
and slide brushroll into noz-
zle making sure that the
brushroll endcaps are in the
correct orientation (Ca
inset), Rotate brushroll
manually to make sure belt
is properly aligned,
Reattach nozzle guard, Replaceall five (5) screws to
secure nozzle guard,
WARNING:TO REDUCETHE RISK OFELECTRICSHOCK- UNPLUGCLEANERBEFOREREMOVINGOR
REPLACINGLIGHTBULB,
This cleaner uses a common automotive lamp #908, 13.0 vomts.For bulb replacement call 1-800-321-
1134 or your local auto parts store,
TOOLREQUIRED:SMALLPHILLIPS HEADSCREWDRIVER
Lean cleaner handle back.
Remove the two (2) screws
located on either side of the
headlight lens,
Pull bulb out of socket to
remove, Do NOT twist,
Gently push bulb into socket
to replace,
Securethe headlight lens by
replacing the two (2)
screws,
lO
WARNING:TO REDUCETHERISK OFINJURY FROMMOVING PARTS- UNPLUGBEFORESERVICING.
DEBRmSREMOVALIHOSE
1. Checkto see if dirt cup is full; empty if needed,
2, Plug cleaner in and check to seeif there is anysuction at end of hose
(Diagram1), If there is suctien at end of hose, move onto Diagram 3. If
there is no suctien at the end of hose, clear dirt pathwindow and lower
hose,Follow these steps: 1. Unplug cleaner,2, Twist and pull hosefrom
upper hose inlet (Diagram 2), 3, Unwrap hose from caddy, Remove
obstruction,
DEBRIS REMOVAL/
NOZZLE GUARD
DEBRmSREMOVAUTURBO TOOL
Remove nozzle guard (see
Diagram 1) by removing the
five (5) screws, Look for
any obstructions and
remove. Remove brushroll
if necessary.
LOCKINGRING
Rotate locking ring 180
andturn turbo tool over.
Pivot lower housing and
remove clog.
To reassemble, be sure tabs
are engaged and pivot the
lowerhousing closed,
WARNING:TOREDUCERUSKOFPERSONALUNJURY-UNPLUGCLEANERBEFORESERVUCING
POSSIBLEREASON
CleaNer won't
pick-up or low
suction
I.
2,
Dust escaping
from cleaner 3,
4,
I,
Cleaner tools
won't pick-up 2,
3,
I.
Headlight not 2,
wnrking
1,
Cleaner is difficult 2,
to push or won't 3,
1, Powercord not firmly
plugged into outlet.
2, Blownfuseor tripped breaker,
3, Heedsservice,
4, Thermal Protector activated,
1, Dirt container not installed
correctly,
2, Dirt container kdl,
3, Brushroll worn,
4, Broken or worn belt,
5, Clogged filter,
6, Nozzle/dirt passage hose
clogged.
7, Carpetheightsetting is incorrect,
Dirt container full.
Dirt container not installed
correctly,
Hose not installed correctly,
Filternot installed
completely,
Hoseclogged,
Dirt container full,
Filterclogged,
Bull) burnt out,
Loose electrical wires,
POSSIBLESOLUTION
1, Plug unit in firmly,
2, Checkfuse orbreakerin home, Replace
fuse/resetbreakec
3. Taketo service centeror call
1-800-321q134,
4, AIIow cleanerto cool- Pc, 3,
1, Review dirt container removal and
replacement - Pc. 8,
2, Empty dirt container - Pc. 8,
3. Replace brushroll - Pc. 9,
4, Replace belt - PC.9.
5, Removefilter and clean - PC,8,
6, Remove lower hose; remove obstru-
ction - Pc. 11,
7, Setcarpet height adjust leverto appropriate
setting for carpet being cleaned - Pc. 6,
1. Empty dirt container - Pc. 8.
2, Review dirt container removal and
replacement - Pc, 8,
3, Review hose installation - Pc, 6,
4, Review filter Removal and
Replacement - Pc, 8,
1, Remove hose and tools; remove
ohstruction - Pc. 6 & Pc. 11,
2, Empty dirt container - Pc, 8,
3, Clean filter - Pc. 8,
1. Replacebulb -Pc, 10,
2, Call 1-800-321-1134 for nearestauthorized
Royal Dealer,
Carpetheight setting is incorrect, 1, Setcarpet height adjust leverto appropriate
setting for carpet being cleaned- Pc, 6,
SelfiPropelledfeaturenotactivated, 2, ReviewSelf-Propelled feature - Pc, 7,
Speedselectorsetting isincorrect, 3, Change speed selector - Pc. 7,
ANYOTHERSERVICINGSHOULDBEDONEBYANAUTHORIZEDSERVICEREPRESENTATIVE
CUSTOMER SERVICE (1-800-321-1134)
Intheeventthatfulthelassistanceisrequired,seeyourYellowPagesfol anauthorizedRoyal'Dealel,Costsof anytranspolta-
tiontoandfromanyplaceofrepairaretobepaidbytheowner, Theservicepartsusedin thisunitareeasilyreplacedandread-
ilyavailable#oreanauthorizedRoyal'Dealelol retailel,Alwaysidentifyyourdeanelbythemodelnumberandmanufacturing
codewhenrequestinginformationor oldelingreplacementparts, (Themodelnumbelappearsonthebooornofthecl_'_nel)
12
Assembly Schematic
©
ModelNo.
087500
087600
087700
087900
SM-24-0104 (888) 321-1134 24-5
Item Part Number
1 1-503819-000
2 2-LC0331-000
3 1-LC0333-000
4 2-LC0320-000
2-LC0322-000
5 2-LC0040-000
2-LC0040-BW0
2-LC0040-AL0
2-LC0040-BZ0
6 1-910080-000
7 2-JC0280-000
8 2-LC0200-000
9 1-910380-000
10 1-910385-000
11 1-LC0011-600
12 1-860081-000
13 2-LC0400-000
14 1-LC0510-000
15 1-089507-000
16 2-LC0430-000
17 1-LC0455-000
18 2-LC0650-000
19 1-LC0035-600
20 1-LC0070-000
21 1-LC0071-000
22 1-LC0610-600
23 1-JC0290-000
24 1-881130-000
25 1-881060-600
26 1-920906-000
27 1-720380-000
28 1-JC0245-600
29 2-JC0255-600
30 1-JC0250-600
31 2-UTT000-000
Part
Models To Fit
ALL
ALL
ALL
ALL
ALL
087900
087700
087600
087500
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
Listing / Price List
Part Description
SCREW - BODY 8-10 X 5/8
HANDLE SCREW PACKAGE
HANDLE FASTENER
UPPER HANDLE ASSEMBLY - 5 WIRE
UPPER HANDLE ASSEMBLY - 3 WIRE
DIRT CUP ASSEMBLY
DIRT CUP ASSEMBLY
DIRT CUP ASSEMBLY
DIRT CUP ASSEMBLY
LATCH SPRING
HEPA FILTER ASSEMBLY
BRUSH ROLL ASSEMBLY
END CAP
BEARING SUPPORT
STYLE 12 BELT
POWER SWITCH
DC MOTOR
HI/LOW SPEED SWITCH ASSEMBLY
SCREW - GEAR DRIVE
GEAR DRIVE ASSEMBLY
GEAR RETURN SPRING
PCB SELF PROPELLED
ROLLER
HANDLE RELEASE PEDAL
HANDLE RELEASE PEDAL SPRING
POWER CORD
MOTOR ASSEMBLY
GROMMET
PIVOT SEAL
BULB #906
BELT, GUIDE CLIP
EXTENSION WAND
DUST BRUSH ASSEMBLY
CREVICE TOOL
TURBO TOOL
ModelNo.
087500
087600
087700
087900
SM-24-0104 (888) 321-1134 24-6
Price List
Part Listing /
Models To Fit
ALL
ALL
ALL
ALL
ALL
087900
087700
087600
087500
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
Item Part Number Part Description
32 1-790655-600 CORD HOOK
33 1-910298-000 HEIGHT ADJUSTMENT BUSHING
34 1-912495-000 ENABLE MICRO SWITCH
35 1-LC0025-000 SWITCH PEDAL
36 1-LC0010- NOZZLE BASE ASSEMBLY
37 1-LC0005- NOZZLE COVER ASSEMBLY
1-LC0005-BW0 NOZZLE COVER ASSEMBLY
1-LC0005-AL0 NOZZLE COVER ASSEMBLY
1-LC0005-BZ0 NOZZLE COVER ASSEMBLY
38 2-LC0015- NOZZLE GUARD ASSEMBLY
39 1-LC0240-000 LOWER HOSE
40 2-JC0010-600 UPPER HOSE ASSEMBLY
41 1-LC0046-000 DIRT CUP INLET GASKET
42 1-LC0048-000 DIRT CUP GASKET
43 1-210376-000 ROLLER AXLE PIN
44 1-LC0075-B00 BUMPER
45 1-LC0450-000 GEAR HOUING PIVOT CLAMP
46 2-LE0332-000 HANDLE LOCKING ASSEMBLY
ModelNo.
087500
087600
087700
087900
SM-24-0104 (888) 321-1134 24-7
GO
o
o
Cx:)
Cx:)
Cx:)
v
GO
r,o
I
GO
r,o
(3o
YELLOW
UPPER t,IANDLEAREA
POWER CORD
VAC MOTOR AREA
,--" HIGH / LOW SWITCH
s WHITE
SELF-PROPEL PCI_
it" POSITION tffFO
_ BRUSHL.,_SS
DC MOTOR
\ .2J
DRIVE SIGNAL WIRES
F BLACK _=MJCRO _N[TC H
W_j* j-'WHITE
WHITE
NOZZLEBASEAREA
00 00 00 00
",4",4",4",4
Loading...