DigiTech XC4833 User Manual

Model.: XC4833

USB 2.0 TO IDE & SATA Adapter

1.Characteristics

• Support SATA spread-spectrum transmitter

• Support SATA II Asynchronous Signal Recovery (Hot Plug) feature

• Compliance with USB 2.0 (Hi-Speed USB) electrical specification

• Compliance with USB Mass Storage Class Bulk-Only Transport Specification

• Support 480Mbps High Speed (HS) and 12Mbps Full Speed USB operation

• Support ATA/ATAPI-7

• Support ATA/ATAPI Ultra DMA Mode

• Support ATA/ATAPI PACKET command feature set

• Support ATA/ATAPI LBA48 addressing mode

• Support dual LUN (Logic Unit Number) for USB to ATA/ATAPI

• Support Windows 98se, Windows ME, Windows 2000, Windows XP, Windows Vista

• Need driver installation under Windows 98se

2. Software Installation

Windows 98se

1) Please put the enclosed CD into the CD-ROM

2) Please plug this USB HDD in the USB port of your computer.

3) The system will detect it and display the "Add New Hardware Wizard" dialog,
please press "Next"

1

4) When the following screen displays, please check "Search for the best driver for
your device (Recommended)" and press "Next".

5) When the following screen displays, please locate the driver folder included by the
driver CD-ROM shipped with this USB HDD

2

6) When the following screen displays, please press "Next"

7) When the following screen displays, please press "Finish"

Windows ME/2000/XP

No need driver installation in those OS platform.

3. Verification

Please track the path "My computer” and "My computer” -- > “System Properties”

-- > “Device Manager" and expand the item "Hard disk controllers”, you should meet
the following screen.

3

4. If you use a all new HDD

1) Please use " Fdisk " to set the capacity of your HDD, but this will destroy all the data
in the HDD.

2) Format your HDD by standard procedures, if you can't find your new HDD, please
following the steps in FAQ-1
Note: "Fdisk" or "Format" will destroy all the data and program in the HDD you select.
Please make sure there is not any data in it, or all the data have a backup copy.

5. FAQ

Q: I could see the icon at the right down comer on the screen, but I still couldn't find my
external HDD.
A: a. Please make sure your HDD has been installed correctly.
b. Please make sure your HDD has been set in "Master" position,
c. Please make sure you have installed correct driver for this USB HDD.
d. Please make sure your HDD has been formatted. If no, please format your hard
drive first.
e. If you are sure you have installed correctly all the hardware and software, please
follow the steps as below to catch your HDD.
i. Enter "Control Panel" and enter "System" icon
ii. Double click it to find a "System Manager".
iii. Find a "Disk drivers" category. There should be 3 drivers, double click the HDD
iV. Find the "Setting" button and choose the option “Removable Drive”
V. Your computer will automatically assign a new letter to this USB HDD after
restarting your computer

6. Caution!!

a. If you are not sure what OS you are using, please contact your PC dealer.
b. Please don't put this USB HDD in a humid or high-temperature environment.
c. If your first installation is failed, please firstly remove the wrong device through the
path as below: path=Control Panel > System > System Properties > Device Manager >
Please remove the items with "?" or "!" mark.

4

ONE TOUCH BACKUP
User's Manual

Notice

• The type of file system is able to support FAT32 and NTFS both.

• When users operate the PCClone EX Lite, the login must be from Administrator; it
can not login from the Guest or any authorized account.

• Does the hard disk happen to the bad sector? Please confirm in advance that can
prevent an improper operating of backup or restore.

• The File Backup doesn’t support the external HD button operating if the operating
system is Windows 98/ Me, please use the hot key instead of.

Software installation

Step

1. Please put PCClone EX CD into CD
ROM drive, the program directly goes
on the screen of PCClone Setup
Wizard.(In case the screen doesn’t
come out, please operate the window
box of “setup.exe”)

2. Click “install”.

3. Please read the license agreement
in detail.

4. If users accept the agreement, please
click “Agree” to install.

5