Digi-Star e-Tracker II User Manual

e-Tracker II



Setup and Use Guide

Addendum to TMR Tracker II User’s Manual and Guide

This addendum covers TMR Tracker II

 version.2.01.01 and e-Tracker II version. 2.01.01 and up

Welcome to e-Tracker by Digi-Star. This guide will assist you in setting up and using
this exciting new companion to the TMR Tracker system. This guide covers only the
setup and use specific to the email transfer of data. All other features of the e-Tracker



program are similar to those features in the TMR Tracker program and as such, you
should refer to the TMR Tracker



User’s Guide and Manual included on your e-Tracker

installation CD for detailed instructions regarding those features.

e-Tracker transfers data via email. An active email account is required at the Farm you
wish to exchange data with.



e-Tracker requires an authorization code. This code must be obtained from Digi-Star



at time of installation. e-Tracker is licensed for up to 15 separate databases. Additional
licenses can be purchased in blocks of 10. Contact Digi-Star for additional information.

e-Tracker can only exchange data with authorized TMR Tracker systems. e-Tracker



uniquely identifies each TMR Tracker database by it’s unique serial number. This
identification ensures that data will only be assigned to the TMR Tracker system from
which it has been sent.

NEW!

e-Tracker can now transfer data via email attachment or file (floppy, network, etc.).

D3593 Ver.1.G 2

Digi-Star, LLC 6/3/03

Template Database

e-Tracker ships with a blank Template Database installed. This database can be used to



create a “standard” set of data used to quickly setup a farm for TMR Tracker

operation.
The template can contain standard ingredients, rations, pens, etc. This database can be
sent via e-Tracker



to the farm and then customized as needed.

Edit the Template Database by clicking on TMR Template and then clicking Select.



Refer to the TMR Tracker

User’s Manual and Guide for detailed information on setting

up the database.

Adding Contacts

When e-Tracker is started, the following screen is displayed:

To add additional contacts, click Add. The following screen is displayed:

D3593 Ver.1.G 3

Digi-Star, LLC 6/3/03