DeWalt DW116, DW117 Instruction Manual

DEWALT Industrial Tool Company, P.O. Box 158, 626 Hanover Pike, Hampstead, MD 21074 Printed in U.S.A. (JAN95-CD-2) Form No. 158865

For Information call toll free between 8:00 a.m. to 8:00 p.m.,seven days a week. 1-800-4-D

EWALT (1-800-433-9258)

DW116/117 Copyright © 1993, 1995

158865/JAN95 5/20/02 3:47 PM Page 2

INSTRUCTION MANUAL
DW116 1/2" V.S.R. Drill
DW117 1/2" V.S.R. Drill

158865/JAN95 5/20/02 3:47 PM Page 3

IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY
DEWALT TOOL, CALL US TOLL FREE AT 1-800-4-DEWALT (1-800-433-9258).

R

1/2" KEYLESS

CHUCK

REVERSING

LEVER

TRIGGER

SWITCH

SWITCH

LOCK BUTTON

MULTI-POSITION

SIDE HANDLE

Serial Number from Nameplate Date of Purchase

Save this information for future reference

DEWALT…BUILT JOBSITE TOUGH

DEWALT high performance industrial tools are made for America’s
toughest industrial and construction applications. The design of every
tool in the line—from drills to sanders to grinders—is the result of rigorous
use on jobsites and throughout industry. Each tool is produced with
painstaking precision using advanced manufacturing systems and intense
quality control. Every tool is checked before it leaves the factory to make
sure that it meets your standards for durability, reliability and power.

DEWALT Built Jobsite Tough…WE GUARANTEE IT.

158865/JAN95 5/20/02 3:47 PM Page 4

1

WARNING: When using electric tools, basic safety
precautions should always be followed to reduce risk of fire,
electric shock, and personal injury, including the following:

READ ALL INSTRUCTIONS

Double Insulation

Double insulated tools are constructed throughout with two
separate layers of electrical insulation or one double thickness
of insulation between you and the tool’s electrical system.
Tools built with this insulation system are not intended to be
grounded. As a result, your tool is equipped with a two prong
plug which permits you to use extension cords without concern
for maintaining a ground connection.

NOTE: Double insulation does not take the place of normal
safety precautions when operating this tool. The insulation
system is for added protection against injury resulting from a
possible electrical insulation failure within the tool.

CAUTION: WHEN SERVICING USE ONLY IDENTICAL
REPLACEMENT PARTS. Repair or replace damaged cords.

Polarized Plugs

Polarized plugs (one blade is wider than the other) are used on
equipment to reduce the risk of electric shock. When provided,
this plug will fit into a polarized outlet only one way. If the plug
does not fit fully into the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician to install the proper outlet.
Do not change the plug in any way.

Safety Instructions For All Tools

• KEEP WORK AREA CLEAN. Cluttered areas and benches
invite injuries.

• CONSIDER WORK AREA ENVIRONMENT. Don’t expose
power tools to rain. Don’t use power tools in damp or wet
locations. Keep work area well lit. Do not use tool in
presence of flammable liquids or gases.

• GUARD AGAINST ELECTRIC SHOCK. Prevent body
contact with grounded surfaces. For example; pipes,
radiators, ranges, and refrigerator enclosures.

• KEEP CHILDREN AWAY. Do not let visitors contact tool or
extension cord. All visitors should be kept away from work
area.

• STORE IDLE TOOLS. When not in use, tools should be
stored in dry, and high or locked-up place — out of reach of
children.

• DON’T FORCE TOOL. It will do the job better and safer at
the rate for which it was intended.

• USE RIGHT TOOL. Don’t force small tool or attachment to
do the job of a heavy-duty tool. Don’t use tool for purpose not
intended.

• DRESS PROPERLY. Do not wear loose clothing or jewelry.
They can be caught in moving parts. Rubber gloves and
non-skid footwear are recommended when working
outdoors. Wear protective hair covering to contain long hair.

• USE SAFETY GLASSES. Also use face or dust mask if
operation is dusty.

• DON’T ABUSE CORD. Never carry tool by cord or yank it to
disconnect from receptacle. Keep cord from heat, oil, and
sharp edges.

158865/JAN95 5/20/02 3:47 PM Page 1