WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightening flash with arrowhead symbol, within an equilateral triangle, is intended the alert the
user to the presence of uninsulated dangerous voltage within the products enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the
appliance.
Laser product symbol: located on the rear panel of the unit, indicate this player is a class laser product, only
use weak laser and no hazardous radiation outside of the unit.
1.Read through this instruction manual before installation and use.
2.Do not touch the power plug with wet hand.
3.Switch off the main power when the unit is not in use. (Disconnect the power plug from the power outlet when
you do not intend to use the unit for a prolonged period of time.) Before moving the unit, remove the disc from the
unit/ tray first.
4.Do not open the cover or touch any of the components exposed out of the unit, only for qualified technicians.
5.Do not expose the unit under direct sunlight or nearby objects that radiate heat to avoid damage the unit.
6.Do not place the unit in moist and humid conditions, which effect the pick-up of the unit lead to out of work.
7.Place the unit on a flat surface and ventilative condition. Please ensure the ventilation holes are not covered
to avoid overheating and malfunction.
8.Clear the panel and case with soft dry cloth only, do not apply any kind of thinner, alcohol or sprays.
9. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as
vases, shall be placed on the apparatus
10. unplug the apparatus when not using for a long time oriented to disconnect from the Mains power
11. No naked flame sources, such as lighted candles, should not be placed on the apparatus.
12.Make sure there is free circulation of air (do not place the device on shelves, on a thick carpet, on a bed, or
anywhere that obstructs the ventilation slots, and leave at least 10cm clearance on all sides.
13.The apparatus shall not be exposed to dripping or splashing.
14.The mains plug is used as the disconnect device, the disconnect device shall remain readily operable.
15.The battery (battery of batteries of battery pack) shall not be exposed to excessive heat such as sunshine,
fire or the like.
16.The Mains plug is used as the disconnect device. It shall remain readily operable, and should not be
obstructed during intended use.
If the electric cable is damaged, it must be replaced by the manufacturer, or by the qualification persons, in order
to avoid a danger.
The product's function maybe reset when it is subjected to electrostatic discharge
disturbance. Just follow the instruction described in this manual to set the function again
for normal operation.
During electrostatic discharge and the strong electromagnetic field, the product may malfunction, then press
“STANDBY”button and the product will return to normal performance.
GB-1
Macrovision:
This product incorporates copyright protection technology that is protected by method claims of certain U.S
patents and other intellectual property rights owned by Macrovision Corporation, and is intended for home and
other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
Manufactured under license from Dolby Laboratories.
"Dolby",and the double-D symbol are trademarks of Dolby Laboratories.
Mains plug is used as the disconnect device. It shall remain readily operable, and should
not be obstructed during intended use.
GB-2
1. PANEL ILLUSTRATION
1. STANDBY
2. PLAY/PAUSE
3. OPEN/CLOSE
4. Display Screen
5. IR Sensor
6. Disc Tray
7. Card Reader
8. USB Port
9. Coaxial Output
10. AV Output
11. HDMI OUTPUT
12. DC INPUT
Note: The USB port is used as a direct connective port,Please don't use any extended connective Cords.
GB-3