Denon DCD-2700 Service Manual
Specifications and Main Features
- Model: DCD-2700
- Type: Stereophonic Audio Compact Disc Player
- Number of Audio Channels: 2
- Frequency Response: 2 Hz – 20 kHz
- Signal to Noise Ratio: 100 dB
- Total Harmonic Distortion: 0.002 %
- Dynamic Range of the Device: 96 dB
- Wow and Flutter: Less than measurable
- Digital to Analog converter Model: PCM1702
- Rated Power Consumption: 15W
- AC Power Rating Supply: 120V / 220V (depending on the model)
- Physical Dimensions: 430mm (W) x 310mm (D) by 100mm (H)
- Physical Weight: 5.6 Kgs
- Remote Control: Yes, supplied with the unit
- Laser Pick-up: KSS - 240 A
- Heat Run Mode: Yes
Frequently Asked Questions
Q: Tell me how I would go about using the DCD-2700?
Answer: Connecting the unit into power source, switching the ON/OFF switch to ON , use the OPEN/CLOSE switch to load the audio disc onto the unit, then press ‘play’ to continue.
Q: How many formats does the player DCD-2700 work with?
Answer: The audio disc player, DCD-2700, is built to read standard audio compact discs only.
Q: How would I go about cleaning the laser lens?
Answer: Use a piece of cleaning paper, dampened with water, to wipe the lens; do not apply excessive pressure.
Q: What is the use of Heat Run Mode?
A: Heat Run Mode is intended for checking the errors of a device by switching between the different playback modes of the unit. This function can be activated by pressing a set of keys upon powering the device.
Q: Is there a specific dealer that specializes in the assembly of the DCD-2700?
A: Replacement components can be obtained through Denon dealers or authorized service centers that repair the Denon products.
User Manual
Loading...