Denon AVR-1908 User Manual

New model information

AVR-1908

AV Surround Receiver

A/V Surround Receiver featuring HD Video connectivity, that enhances your level of entertainment enjoyment.

Bullet points

The Latest HD Video Support

• HDMI1.3a inputs/output

• HDMI audio support, Dolby Digital, dts and multi channel PCM

• Deep Color up to 36-bit and xvYCC broader color space support

• Discrete devices for ultimate HD video performance in each block

• 10-bit video encoder and decoder

• 1080p video pass through

MultEQ Auto setup and Room EQ

• New tower type microphone for more accurate measuring

• Up to six measurement points

• High level resolution filters for satellite speakers and also subwoofer

*Seup mic included

Denon Design Solutions for Maximizing Content Quality

• Indentical quality and power for all 7 channels, 90W x 7ch

• Discrete devices for ultimate performance in each block

• New 32-bit floating point DSP

• Minimum signal path design

• Direct Mechanical Ground for stable drive

• Dual power transformer

• Denon customised block capacitor

• Separate unit design

Compressed Audio Restorer

Denon's new audio technology for MP3/WMA/AAC compressed audio formats to reproduce higher frequency range and deeper bass sound.

Digital Media Connectivity

• Network Audio/Photo Ready (optional ASD-3N/3W)

• iPod Audio/Photo and Video playback (optional ASD-1R/3N/3W)

• XM Ready

*Shown ASD-3W

Ease-of-Use

• Auto set-up and Room EQ, featuring MultEQ from Audyssey

• 3 Quick Select Buttons

• New back panel layout

Multi-Zone Capability

• Two Zone multi-source capability

• Zone 2 audio output

• Power amplifier assign for zone 2

• Includes dedicated zone remote control unit

• Remote in/out

Other Features

• Auto Surround Back Channels ON function, for auto-detection of supporting sources

• Auto Surround mode

• Audio Delay function (max. 6 frames or 200 msec)

• Night Mode for neighbor friendly listening

• Muting level settings (Full/-40dB/-20dB)

• Audio Level Memory, capable of correcting different signal levels for each input device

• Volume Level Limiter, for setting maximum volume levels

• Power-ON Volume Level Memory

• Variable subwoofer crossover switching

Input / Output terminals

HDMI

Component

S-Video

Composite

Analog audio (Tuner included)

Analog EXT. Input

Digital OPTICAL

Digital COAXIAL

Dock control for iPod

7.1ch

Others

HDMI Monitor

Component Monitor

S-Video REC

Monitor

Composite REC

Monitor

Analog audio REC

Zone 2

Analog Preout

Digital OPTICAL

Remote In/Out

1/1

Specifications

Power Amplifier Section Rated output *THD figures are power amp stage values.

ront 90 W + 90 W (8 ohms, 20Hz - 20kHz)

enter 90 W (8 ohms, 20Hz - 20kHz)

C Surround 90 W + 90 W (8 ohms, 20Hz - 20kHz) Surround back

Preamplifier Section

nput sensitivity/impedance

Audio inputs 200 mV/47 kohms

utput level/Load impedance

Audio outputs 1.2 V/10 kohms

ec. Audio outputs 200 mV/47 kohms

M Section

F Tuning frequency range 87.5 - 107.9 MHz

sable sensitivity 1.0 µV (11.2 dBf)

AM Section

uning frequency range 520 - 1710 kHz

T Usable sensitivity 18 µV

eneral

G Power supply AC 120 V, 60 Hz

imensions (WxHxD) 434 x 171 x 383 mm

Weight 11.1 kg, 24.8 lbs

90 W + 90 W (8 ohms, 20Hz - 20kHz)

17-3/32” x 6-47/64” x 15-5/64”

• Design and specifications aresubject to change without notice.

• Dolby and thedouble-D symbol are registeredtrademarks of Dolby Laboratories.

• DTSis a registeredtrademark &the DTSlogos andsymbol are trademarks ofDTS, Inc.

• Audyssey MultEQ is a trademark of Audyssey Laboratories. MultEQ and the Audyssey MultEQ logo are trademarks of Audyssey Laboratories, Inc.

Denon Brand Company D&M Building, 2-1 Nisshin-cho, Kawasaki-ku, Kawasaki-shi, Kanagawa, 210-8569, Japan www.denon.com

Denon Electronics (USA), LLC 100 Corporate Drive Mahwah, NJ 07430, U.S.A. www.usa.denon.com

16940707 A