Denon AVR-1802, AVR-882 Service Manual
Specifications and Main Features
- Power Amplifier
- Rated Output:
- Front: 80W + 80W (8Ω, Wehn 0.08% THD 20Hz to 20kHz)
- Centre: 115W (6Ω, at 1kHz, T.H.D. is 0.7%) (for models that operate in U.S.A and Canada & Europe)
- Surround: 115W + 115W (6Ω at 1kHz T.H.D. 0.7%) (for models that operate in U.S.A and Canada & Europe)
- Output Terminals: A or B: 6 to 16Ω
- Input Sensitivity / Input Impedance: 200mV / 47kΩ
- Frequency Response: 10Hz-100kHz:+1,-3dB (TONE DEFEAT ON)
- S/N Ratio: 100dB (IHF-A weighted) (TONE DEFEAT ON)
- Video Section
- Standard Video Jacks:
- Input / Output Level and Impedances: 1Vp-p, 75Ω
- Frequency Response: 5Hz-10MHz -+ 1,3dB
- S-Video Jacks:
- Input / Output Level and Impedances : Y (brightness) signal - 1Vp-p,75Ω ; C (colour) signal - 0.286Vp-p, 75Ω
- Frequency Response: 5-10 MHz-+1, -3dB
- Tuner Section
- Receiving range:
- for U.S.A. & Canada: 87.50~107.90 MHz
- for Europe & Asia Models: 87.50~108 MHz
- Usable sensitivity:
- FM Mono: 1.6 μV (15.3 dBf);
- FM Stereo: 23 μV (38.5 dBf)
- Total Harmonic Distortion:
- Mono: 0.15% 1 kHz;
- Stere: 0.3% 1 kHz
- General
- Power Supply
- For U.S.A Canada: AC120V, 60Hz
- For Europe: AC230V, 50Hz
- For Asia: AC115/230V, 50/60Hz
- Power Consumption:
- Canada and the US models: 4.5A
- Europe and Asia models: 230W
- Dimensions: 434 (width) x 171 (height) x 417 (depth) mm
- Weight: 10.9kg (24 pounds)
- Remote Control Unit (RC-897)
- Batteries: AA/R6P Type
- External Measurement: 54 (width) x 172.5 (height) x 29 (depth) mm
- Weight: 120 g (4.2 oz approximately including batteries)
Frequently Asked Questions
- What power output do the front speakers give?
The power output for the front speakers is 80W plus 80W at 8Ω.
- How do I connect video equipment to the AVR-1802/882?
The equipment can be connected through standard video jacks or S-video jacks.
- What is the receiving area limit of the FM tuner?
For the US & Canada model of the FM tuner, the range is 87.50Mhz to 107.90Mhz, and for Europe & Asia model, 87.50Mhz to 108.00Mhz.
- Different impedance speakers can be connected to this receiver?
Yes, different kinds of speaker impedance between 6-16 ohms can be used as the output terminals permit.
- What is the voltage in case of operation for the AVR-1802/882?
It operates on AC120V for US and Canada models, AC230V for Europe models and AC115/230V for Asia models.
- The remote control unit uses which kind of batteries?
The remote control unit uses R6P/AA batteries.
User Manual
Loading...