Denon AVC-A10SE Service Manual
Specifications and Main Features
Audio Section
- Power Amplifier Rated Output Marks
- The amplifier's output is rated at 125 Watts for both channels, 8 Ohms between a frequency range of 20Hz to 20kHz.
- The surround mode produces 125 Wats for each of the five channels with specification of stereo
- The output is 170 Watts for each of the two channels if the impedance is rated at 8 Ohm, 270 Watts if the impedance is set to 4 Ohm, and 350 Watts if the impedance decreases to 2 Ohm.
- Input Sensitivity/P.D. is equal or less than 200 mV with an input impedance of 47 k Q.
- The frequency response is rated to be between 10Hz to 100kHz with 0 margin of error for DIRECT mode.
- S/N Ratio is rated at 105 D.B. which is specific to DIRECT mode.
- Total Harmonic Distortion is stated as being 0.005 with a range of 20Hz to 20 kHz on the scale, DIRECT mode.
Video section
- The video input and output level and impedance is rated at 1Vp for in, 1 for 75 for out
- The frequency response lies between 5Hz to 10Mhz with 0.3 margin of error on the scales for standard video jacks.
General section
- The power supply required for the device is 110 -120 Volts with 60HZ for americas including Canada and Taiwan, as for Europe its rated at 230 volts, with a frequency of 50Hz, china requires 220volts along with 50Hz as the frequency.
- Power consumption for each respective region is as fallows USA is at 10.9A European countries along with Asia and China stand at 690 watts while Taiwan has 620W.
- Dimensions Metric is specified as 434 for Width, 181 for height and 494 for depth.
- Mass 21.5 Severaty Five pounds and 6oz
Remote Control Unit RC 869
- Batteries R6P AA type which require two batteries
- External dimensions: 70(W) x 215(H) x 24(D) mm;
- 200 g (6.98 ounces)--including weight of the batteries.
Frequently Asked Questions
Q: And for the big end of this amplifier, what is the amplification output level?
A: Its rated output is 125W+125W for stereo (8 ohms), and 125W x 5ch for surround (8 ohms).
Q: That is the input frequency response for audio?
A: Wide band frequency for input frequency response for audio is 10 Hz ~ 100 kHz and +0, -3 dB stated in DIRECT mode.
Q: What’s the consumption of this unit?
A: The consumption depends on the model being used: for U.S for 10.9 A, and 690 W for European models.
Q: What are the dimensional details of the said device?
A: The said device has a maximum outer dimensions measuring 434 (W) x 181 (H) x 494 (D) mm.
Q: What kind of batteries are used in the remote control?
A: The two batteries R6P/ AA Type are used in the remote control.
User Manual
Loading...