Deni 4910 User Manual

Rotating

Wine Chiller

Model #4910

IMPORTANT!

Please keep these instructions and

your original box packaging.

®1®

INSTRUCTIONS

FOR PROPER USE AND CARE

www.deni.com

IMPORTANT SAFEGUARDS

When using this electrical appliance, safety
precautions should always be observed, including
the following:

n READ ALL OF THE INSTRUCTIONS.
n Do not use outdoors or on a wet surface.
n Close supervision is necessary when used near

children.

n Place the Wine Chiller securely in the center of the

counter or work space.

n Use only as described in this manual with provided

attachments. The use of accessory attachments not
recommended by manufacturer may cause injury.

n Do not use with damaged cord or plug. If the

appliance is not working as it should, has been
dropped, damaged, left outdoors, or dropped
into water, return it to Keystone Manufacturing
Company, Inc. for proper service and replacement
or repair.

n Do not do the following: pull or carry by the cord,

use cord as a handle, close a door on cord, pull
cord around sharp edges or corners, let cord hang
over edge of counter, operate appliance over cord.
Keep cord away from heated surface.

n Do not place near hot gas, electric burner or in a

heated oven.

n To protect against risk of electrical shock, do not

place cord, plug or cooling bucket in water or any
other liquid.

n Always unplug when not in use and before cleaning.
n Turn the unit OFF before unplugging. Unit must be

OFF before plugging into wall outlet.

n Do not use an extension cord with this unit.
n Do not unplug by pulling on cord. To unplug, grasp

the plug, not the cord.

n Do not handle plug or appliance with wet hands.
n This appliance must have chilled water or ice in it

during use. Never use without water or ice.

n Always unplug the unit before attempting to move

it.

n This unit is recommended for household, indoor use

only.

SAVE THESE INSTRUCTIONS

Rotating Wine Chiller

FEATURES

Rotating
Removable Cup
(2 sizes: 4”and 3.5”)

Power
Adapter

Timer

2

DC Jack

Cooling
Bucket

Battery
Compartment

BEFORE FIRST USE

1. Remove all packing materials and literature.

2. Wash the removable cups in warm soapy water.
Rinse well and dry thoroughly.

3. Wipe interior and exterior surfaces of the cooling
bucket with a soft, clean, damp cloth. DO NOT
IMMERSE THE COOLING BUCKET, CORD OR
PLUG IN WATER OR ANY OTHER LIQUID.

HOW TO OPERATE

1. Select the correct size cup for the bottle you are
chilling. Place the cup into the cooling bucket,
lining it up with the 3 notches on the bottom of
the bucket. Turn the cup clockwise to lock into
place. The small cup is for bottles with a 3 - 3.5
inch diameter. The large cup is for bottles with a

3.5 - 4 inch diameter.

2. Insert 4 AA batteries (not included) or plug the
unit in. If using batteries, be sure they are
positioned correctly.

3. Put the bottle to be cooled inside the cup.

4. Fill the cooling bucket with chilled water or
crushed ice; up to the water level mark on the
inside of the bucket.

®

5. Turn the timer clockwise to the desired position.
NOTE: 15 minutes is normally enough time to chill
a large bottle of wine.

6. Once the timer has been set, the cup will begin
to rotate in one direction and then the other.
Multi-colored lights will illuminate the water,
creating an entertaining atmosphere.

7. Once the time has run out, the cup will stop
rotating and the lights will go out.

TO CLEAN:

1. Always be sure the power adapter is disconnected
from the wall and the DC jack is removed from the
unit before cleaning. NEVER let the power cord
get wet!

2. Empty the water or ice from the cooling bucket.
Remove the cup and wipe the inside of the
cooling bucket with a damp cloth.

Note: A light non-abrasive cleaner can be used to
clean the cooling bucket, but the surface must be
wiped clean with a damp cloth before drying.

3. Dry the removable cup thoroughly.

4. Always remove the batteries if the unit will not be
used for a long period of time. This will prevent
them from leaking and corroding the contacts.

3

CUSTOMER SERVICE

I

I

f you have any questions or

problems regarding the operation

of your Deni Rotating Wine

Chiller, call our customer service

department toll free:

Monday through Friday

8:30 a.m. to 5:00 p.m.

(Eastern Standard Time)

1-800-DENI-822

or email us at

[e-mail]

Visit our website at

www.deni.com

Deni by Keystone Manufacturing Company, Inc.

Your Deni Rotating Wine Chiller is warranted for one year from date of purchase

ONE-YEAR LIMITED WARRANTY

or receipt against all defects in material and workmanship. Should your appliance
prove defective within one year from date of purchase or receipt, return the unit,
freight prepaid, along with an explanation of the claim. If purchased in the U.S.A.
or other country, please send to: Keystone Manufacturing Company, Inc., 33
Norris Street, Buffalo, NY 14207. If purchased in Canada, please send to:
Keystone Manufacturing Company, Inc., 151 Cushman Road, St. Catharines,
Ontario L2M 6T4. (Please package your appliance carefully in its original box and
packing material to avoid damage in transit. Keystone is not responsible for any
damage caused to the appliance in return shipment.) Under this warranty,
Keystone Manufacturing Company, Inc. undertakes to repair or replace any parts
found to be defective.

This warranty is only valid if the appliance is used solely for household
purposes in accordance with the instructions. This warranty is invalid if the unit
is connected to an unsuitable electrical supply, or dismantled or interfered with in
any way or damaged through misuse.

We ask that you kindly fill in the details on your warranty card and return it within
one week from date of purchase or receipt.

This warranty gives you specific legal rights. You may also have other rights which
vary from state to state or province to province.

®

©2008 Keystone Manufacturing Company, Inc.

All Rights Reserved