Delonghi XL 1073N B, XL 1073NBG Instructions Manual

1) Read the instructions carefully
2) Before starting the appliance, make sure the filters are in position.
3) Check the filters regularly and if necessary brush or replace.
4) If you wash the filters, make sure they are completely dry before replacing them.
6) Do not vacuum up red hot objects (cinders, cigarette ends, etc).
7) Always unplug the appliance from the mains socket when not in use or before cleaning or maintenance.
8) Do not use the appliance if it appears to be faulty.
9) To avoid damaging the insulation, do not run the appliance over the power cable.
10) Never unplug the appliance by pulling the power cable or the appliance itself.
11) Keep the appliance out of reach of chil­dren or unfit persons.
12) Use the appliance for domestic use only as described in the instructions.
13) For repairs, contact your dealer or an authorized service centre only
The manufacturer reserves the right to modify appliances and tools without warning. Original spare parts and tools should always be used to maintain the efficiency of your appliance. Failure to do so invalidates the guarantee.
Dear customer Congratulations! You have just bought a De'Longhi Tabata, the latest gene­ration upright vacuum cleaner, versatile, easy to handle and powerful.
Our products are the result of exhaustive technical tests backed by consoli­dated experience in the production of home cleaning appliances.
We have produced this manual to enable you to get the best from your appliance and appreciate its quality to the full.
If you follow our tips, we are sure the appliance will give you complete sati­sfaction and long and faithful service.
This appliance will make your everyday household cleaning easier.
12
IMPORTANT
GB
1
2
3
Traditional upright vacuum cleaner for floors or carpets
Vacuum cleaner to remove difficult to reach dirt (under
or on top of furniture, etc).
Portable vacuum cleaner to clean sofas, car interiors, mattresses, etc.
DESCRIPTION
•“Nautilus System A. Jointed handgrip with cap B. Handgrip release slide C. Fork rotation device D. Fork
E. Built-in handle F. Power regulator G. Clip for opening dust container H. Air outlet filter grill I. Dust container full indicator L. ON/OFF switch M. Cable winder N. Suction port O. “Eco Heart” Bagless Filter P. Two position carpet/floor brush
or "Explora" brush (depending on model)
Q. Multipurpose nozzle for upholstered furniture R. Crevice tool
INTRODUCTION
Versatile, powerful and compact, Tabata goes wherever you want, but above all, becomes whate­ver you want whenever you want. Thanks to the innovative "Nautilus System" rotating fork, you can transform it in a flash:
A
B
C
D
NAUTILUS
SYSTEM
13
PREPARATIONS FOR USE
Unpack the appliance, fit the suction hose into the hole in the fork of the "Nautilus System" (fig. 1), push it in as far as it will go then rotate clockwise until it locks in place. To ensure the hose is cor-
rectly inserted, make sure the word "PULL" on the rotating devi­ce on the hose is turned towards the built-in handle (E).
Now the “Nautilus System” is in the correct position to use the appliance as a traditional upright vacuum cleaner.
USING AS A TRADITIONAL UPRIGHT VACUUM CLEANER
Cleaning floors and carpets
Make sure the “Nautilus System” is turned towards the built-in hand­le E. Fit the carpet/floor brush O (depending on model), pushing it into the suction port N as far as it will go (fig. 2). To remove, just pull until it comes out. The two-position carpet/floor brush efficiently removes dust from floors (marble or tiled), rugs or carpets. When the pedal (fig. 3) is pushed towards the "hard floors" posi­tion ( ), the bristles protrude to clean hard floors more efficiently. This position is recommended for in-depth cleaning of floors and for floors with pronounced joints. When the pedal is pushed towards the "carpets" symbol ( ), the bristles retract and the brush is ready to clean fabric surfaces and delicate floors such as parquet, marble, etc.
With the "Explora" brush (certain models only), the cleaner vacuums up dust from hard floors, carpets or rugs efficiently. The jointed wings make it ideal for vacuuming near furniture or in corners (Fig. 3). To reach under radiators or shallow furniture, flatten the brush by lowering it and rotating it clockwise or anticlockwise (Fig. 4).
To reach under beds or deeper furniture, you should set the cleaner up for cleaning inaccessible places as described in the paragraph "Using as a vacuum cleaner to clean inaccessible places".
k"
Fig. 1
Fig. 2
Fig. 3
Fig. 4
14
"PULL"
Built-in handle (E)
Suction port (N)
(O)
2
"Clic
1
Loading...
+ 5 hidden pages