Delonghi HSX2320F, HSX2320 Instruction manuals [it]

De’Longhi Appliances via Seitz, 47 31100 Treviso Italia www.delonghi.com

5711310321/04.15_00

HSX2320 Series

CONVETTORE

CONVECTOR

CONVECTEUR

KONVEKTOR

LUCHTVERHITTER

AQUECEDOR

ΘΕΡΜΟΠΟΜΠΟΣ

КОНВЕКТОР

FŰTŐBERENDEZÉS

KONVEKTOR

KONWEKTOR

KONVEKSJONSOVN

VÄRMEELEMENT

LÄMMITIN

IT

pag. 4 page 7 page 10 S.13

EN

FR

DE

NL

pag. 16 pág. 19 pág. 22 σελ. 25

RU

стр. 28 Бет. 31 old. 35 str. 38

SK

str. 41 str. 44 str. 47 str. 50

BG

стр. 53 pag. 56

ELECTRICAL CONNECTION (UK ONLY)

A) If your appliance comes tted with a plug, it will incorporate a 13 Amp fuse. If it does not t your socket, the plug should

be cut o from the mains lead and an appropriate plug tted, as below.

With alternative plugs not incorporating a fuse, the circuit must be protected by a 15 Amp fuse. If the plug is a moulded-on

type, the fuse cover must be re-tted when changing the fuse using a 13 Amp Asta approved fuse to BS 1362. In the event
of losing the fuse cover, the plug must.

NOT be used until a replacement fuse cover can be obtained from your nearest electrical dealer. The colour of the correct

replacement fuse cover is that as marked on the base of the plug.

WARNING: Very carefully dispose of the cut o plug after removing the fuse: do not insert in a 13 Amp socket elsewhere in

the house as this could cause a shock hazard.

B) UK Plug specications: please follow the instructions provided below.

ES

KZ

PL

RO

PT

HU

HR

EL

CS

SL

IMPORTANT

The wires in the mains lead are coloured in accordance with the following code:
Blue: Neutral
Brown: Live

As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your
plug, proceed as follows:
The blue wire must be connected to the terminal marked with the letter N or coloured black.
The brown wire must be connected to the terminal marked with the letter L or coloured red.
If you have a 3-pins plug, do not connect any wire to the "earth" terminal.

2