DELONGHI EC 680.MB Installation Manual

IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed, including the following:
• Read all instructions.
• Do not touch hot surfaces. Use handles and knobs.
• To protect against re, electrical shock and personal injury, do not immerse cord, plug or appliance in water or other liquid.
• Never allow the appliance to be used by children.
• Do not operate with a damaged cord or plug, or after the appliance malfunctions, or has been damaged in any manner. Return the appliance to the nearest authorized service facility for examination, repair or adjustment.
• The use of accessory attachments or spare parts not recommended by the appliance manufacturer may result in re, electrical shock or personal injury.
• Do not use outdoors.
• Do not let the cord hang over the edge of the table or counter, or touch hot surfaces.
• Do not place on or near a hot gas or electrical burner, or in a heated oven.
• Plug cord into the wall outlet. To disconnect, turn any control to “o”, then remove plug from wall outlet.
• Do not use the appliance for other than the intended use. This appliance is to be utilized for domestic use only. Any other use is to be considered improper and therefore, dangerous.
WARNING: To reduce the risk of re or electric shock, do not remove the exterior of the unit or the cover. Don’t attempt to repair or modify the machine, doing so will void the warranty. Repair should be done by authorized service personnel only!
SAVE THESE INSTRUCTIONS
THIS PRODUCT IS FOR HOUSEHOLD USE ONLY
SHORT CORD INSTRUCTIONS
- A short power cord is provided to reduce risks resulting from becoming entangled in or tripping over a longer cord.
- Longer, detachable power supply cords or extension cords are available and may be used if care is exer­cised in their use.
- If an extension cord is used, the marked electrical rating should be at least as great as the electrical rating of the appliance. If the appliance is provided with 3- wire, grounding type cord, the extension should be a GROUNDING TYPE 3 - WIRE CORD. The longer cord should be arranged so that it will not drape over the counter-top or table top where it can be pulled on by children or tripped over.
- Your product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will t into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to t, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
6
IMPORTANT SAFEGUARDS Symbols used in these instructions
Important warnings are identied by these symbols. It is vital to respect these warnings.
Danger!
Failure to observe the warning could result in life threatening injury by electric shock.
Important!
Failure to observe the warning could result in injury or damage to the appliance.
Danger of burns!
Failure to observe the warning could result in scalds or burns.
Please note:
This symbol identies important advice or information for the user.
Instruction for use
Read this Instruction for Use carefully before using the appli­ance. Failure to follow this Instruction for Use may result in burns or damage to the appliance. The manufacturer is not liable for damage deriving from failure to respect this Instruction for Use.
Please note: Keep this Instruction for Use. If the appliance is passed to other persons, they must also be provided with this Instruction for Use.
Checking the appliance
After removing the packaging, make sure the product is com­plete and undamaged and that all accessories are present. Do not use the appliance if it is visibly damaged. Contact De’Longhi Customer Services.
TECHNICAL DATA
Mains voltage ...................................................... 120V~60Hz
Absorbed power .......................................................... 1300 W
Pressure ........................................................................ 15 bar
Water tank capacity .............................................................1 l
Dimensions WxHxD ............................ 149x305x330 (414)mm
Weight ........................................................................ 4,04 Kg
None of the components or accessories is dish­washer safe.
DESCRIPTION
The terminology below will be used repeatedly on the following pages.
Description of the appliance
(see page 3) A. Water tank lid B. Tank extraction handle C. Water tank D. Cup warmer E. Boiler outlet F. ON/OFF switch G. Cup tray H. Drip tray full indicator I. Drip tray J. Hot water/steam spout K. Hot water/steam connection nozzle L. Hot water/steam connection tube M. Steam dial N. Filter holder O. Measure/presser P. 1 cup lter ( symbol under lter) Q. 2 cup lter ( symbol under lter) R. Pod lter ( S. Water softener lter (*not included, can be purchased
from authorised Customer Services)
symbol under lter)
Control panel description
T. One cup button T1. ON light on button (white) U. Two cups button U1. ON light on button (white) V. Steam button V1. ON light on button (white) V2. Descale light (orange)
INSTALLING THE APPLIANCE
Important!
When you install the appliance, you should respect the follow­ing safety warnings:
Water penetrating the appliance could cause damage. Do not place the appliance near taps or sinks.
• The appliance could be damaged if the water it contains freezes.
Do not install the appliance in a room where the tempera-
ture could drop below freezing point.
• Arrange the power cable in such a way that it cannot be damaged by sharp edges or contact with hot surfaces (e.g. electric hot plates).
• The appliance gives o heat. After positioning the appli­ance on the worktop, leave a space of at least 3 cm be-
7
tween the surfaces of the appliance and the side and rear walls and at least 15 cm above the coee maker.
Connecting the appliance
Danger!
Check that the mains power supply voltage corresponds to that indicated on the rating plate on the bottom of the appliance. Connect the appliance to an eciently earthed and correctly installed socket with a minimum current rating of 10A only. If the power socket does not match the plug on the appliance, have the socket replaced with a suitable type by a qualied professional.
FILLING THE WATER TANK
1. Extract the tank by pulling it upwards (g. 1).
2. O pen the lid and ll the tank with fresh clean water, taking care not to exceed the MAX level (g. 2).
Put the tank back in the appliance, pressing lightly to open
the valves located on the bottom of the tank.
3. More simply, the tank can also be lled without extracting it by pouring the water directly from a jug.
Important:
Never operate the appliance without water in the tank or with­out the tank.
Please note:
It is normal for there to be water in the space under the tank. This should therefore be dried regularly with a clean sponge.
SETTING UP THE APPLIANCE
• Turn the appliance on by pressing the ON/OFF switch (g.
3). The appliance performs a self-diagnosis cycle, indicated by sequential ashing of the three buttons.
• The
When the lights stop ashing and remain on steadily, the
• Place a container with a minimum capacity of 100 ml
Turn the hot water/steam dial to the
Attach the lter holder to the appliance. To attach correctly,
and lights ash to indicate the appliance
is heating up.
appliance is ready for use.
under the hot water/steam spout (g. 4).
position (g.
5) and deliver about 100 ml of water, then close the dial again ( symbol).
align the lter holder handle with the INSERT symbol (g.
9), attach the lter holder and rotate the handle towards the right until aligned with the CLOSE symbol.
To rinse the machine’s internal circuits, place a con-
tainer under the coee spout and press the key. Repeat this procedure 5 times.
Then proceed with rinsing the “steam” circuit: place
a container under the hot water spout and turn the dial to the position. Hot water is delivered. When the appliance automatically stops the hot water delivery, close the dial (○symbol). Repeat this procedure 1 more time (If necessary, rell the tank).
Please note:
The rst time you use the coee maker, you need to make 4/5 cups of coee or 4/5 cappuccinos before it starts to give satis­factory results.
PROGRAMMING THE SETTINGS MENU
To access the menu, make sure the appliance is ready for use,
then press and hold the three buttons ash in sequence: The appliance is now in programming mode. Set the coee maker as you wish, then exit the settings menu by waiting for 15 seconds.
Please note:
If no selections are made for 15 seconds, the appliance automat­ically exits programming and is ready for use again.
button for 10 seconds until the
Setting coee temperature
To modify the temperature of the water used to make the coee, proceed as follows:
1. Access the settings menu;
2. Press the selection mode.
The lights corresponding to the current selection come on:
3. The lights start ashing in sequence;
4. Press the button corresponding to the required temperature:
low medium high
5. The button been saved.
The appliance exits the menu and is ready for use.
button to enter the coee temperature
low
medium
high
ashes to indicate that the selection has
8
Loading...
+ 7 hidden pages