Dell W-IAP105, W-IAP-105-USF1, W-IAP-105-F1 Specifications

Dell Networking W-IAP105
Access Point

The Dell Networking W-IAP105 is an 802.11n-based instant access point (IAP) that delivers the

aordability and simplicity of an entry-level enterprise-grade WiFi network.

The W-IAP105 has dual radio, each radio capable of working in
either 2.4 or 5GHz bands, (dual radio, dual band) and includes
built-in internal omni-directional antennas. The W-IAP105 delivers
300Mbps per radio, is built to provide years of trouble-free operation
and is backed by an Extended Lifetime Warranty.

Virtual controller technology

The virtual controller technology in the Dell Networking W-IAP105
delivers enterprise-grade controller capabilities without requiring a
separate access point controller. The virtual controller in a single
IAP is capable of controlling a multiple number of other IAPs in a
network that are either local or dispersed across multiple locations.
Like a dedicated controller, an IAP is able to perform key tasks such
as AP auto discovery, 802.1X authentication, role- and device-based
policy enforcement, rogue detection as well as specialized Adaptive
Radio Management™ (ARM) that optimizes WiFi client behavior by
making sure that IAPs stay clear of RF interference. When multiple
IAPs are connected, a single IAP acts as a primary virtual controller.
In the event of primary virtual controller failure, another W-Series
IAP in a chain automatically takes on the role with no disruption
to services. Scalability of an IAP network is bounded by Layer 2
network design best practices.

Ease of deployment

Dell Networking W-IAPs are designed to be up and running in
minutes. From a laptop, simply connect wirelessly to an SSID to
perform over-the-air provisioning in quick, easy steps. To expand the
network, just install more Dell Networking W-IAPs — configuration
is automatically uploaded to new units. You can dedicate one radio
in dual-radio W-IAPs to form a wireless mesh type of network and
eliminate cabling between W-IAPs.

enhanced features for trac flow analysis, deployment, monitoring
and management. OMNM comes with 10 free licenses; each IAP­based network uses one license, you can use the remaining nine
licenses for your other Dell Networking devices.

Investment protection

As WLAN requirements expand, Dell Networking W-IAPs can be
re-imaged as 802.11n campus APs and migrate to a centralized
Mobility Controller architecture capable of supporting hundreds
and thousands of APs. Firmware to covert an IAP to a campus AP
is available upon request. In addition to providing WLAN access,
campus APs in a centralized, controller architecture can provide
wireless intrusion protection and powerful spectrum analysis
capabilities.

TAA-compliant

The W-IAP105 TAA version is compliant with the guidelines put forth
in the Trade Agreements Act (19 U.S.C. and 2501-2581), which is
intended to promote products either made in the USA or free-trade­friendly countries.

Mainstream 600Mbps

802.11n access point with
built-in virtual controller,

Management and visibility

Multiple Dell Networking W-IAP networks can be securely and
centrally managed by the Dell Networking W-Series AirWave
software management suite, allowing W-IAPs to operate hundreds
of remote locations. With Dell Networking W-Series AirWave, IT has
real-time visibility into users, mobile devices, and wired and wireless
LANs infrastructure, all from a single management console.

Dell also oers OpenManage Network Manager (OMNM) network
management software with a highly customizable, easy-to-use,
web-based console. OMNM delivers support for the full line of Dell
Networking wired devices and W-Series wireless devices and oers

oering simplicity,
manageability and access

point clustering capability

.

Specifications

Operating modes

• Multiservice concurrent 802.11a/n + b/g/n WLAN

• Backward compatible with 802.11a/b/g and mixed-mode
11a/b/g/n deployments

Radios

• Multifunction, dual radio capable of 2.4 and 5GHz
operation

• Both 802.11n radios implement 2x2 MIMO with two spatial
streams, providing up to 300Mbps data rate per radio

Wireless radio specifications

• Supported frequency bands (country-specific restrictions apply):

- 2.400 to 2.4835GHz

- 5.150 to 5.250GHz

- 5.250 to 5.350GHz

- 5.470 to 5.725GHz

- 5.725 to 5.875GHz

• Available channels: Dependent upon configured regulatory
domain

• Dynamic frequency selection optimizes the use of available RF
spectrum

• Transmit power:

- 2.4GHz: Up to 23dBm (limited by local regulatory
requirements)

- 5GHz: Up to 23dBm (limited by local regulatory
requirements)

- Transmit power configurable in increments of 0.5dBm

• Supported radio technologies:

- 802.11b: Direct-sequence spread-spectrum (DSSS)

- 802.11a/g/n: Orthogonal frequency division multiplexing
(OFDM)

- 802.11n: 2x2 MIMO with two spatial streams

• Supported modulation types:

- 802.11b: BPSK, QPSK, CCK

- 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
Association rates (Mbps):

- 802.11b: 1, 2, 5.5, 11

- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54

- 802.11n: MCS0 - MCS15 (6.5 to 300Mbps)

- 802.11n high-throughput (HT) support: HT 20/40

- 802.11n packet aggregation: A-MPDU, A-MSDU

Antennas

• Four integrated, downtilt omni-directional antennas

• Maximum antenna gain:

- 2.4GHz/3.0dBi

- 5GHz /4.5dBi

Interfaces

• Network:

- 1 x 10/100/1000Base-T Ethernet (RJ45), auto-sensing,
MDI/MDX

• Power:

- 1 x DC power connector

• Other:

- 1 x RJ45 console interface

Power options

• 48V DC 802.3af PoE

• External AC power providing 12V DC to AP (adapter sold
separately)

• Maximum power consumption: 12.5 watts

Mounting

• Ceiling tile rail (15/16” AND 9/16” recessed or non-recessed)

• Wall mount

Mechanical

• 132 x 135 x 45 mm (5.2 x 5.3 x 1.8 in)

• Weight: 300g (10.58oz)

Certifications/Regulatory

• Wi-Fi certified: 802.11a/b/g/n

Product meets EMC, safety and wireless standards of over 50
countries inclusive of; USA (FCC), Canada, EU, Japan, Korea,
China. For more country-specific regulatory information, and
approvals, please see your Dell representative.

Minimum AOS version

• 5.0.3.0-1.1.0.0

Extended Life Warranty*

RF management

• Automatic transmit power and channel management control
with auto coverage hole correction via ARM

• Maximum ratio combining for improved receiver performance

Advanced features

• Wireless intrusion detection

• Integrated Trusted Platform Module for secure storage of
credentials and keys

*Select Networking products carry an Extended Life Warranty with Basic Hardware Service. Warranty covers repair or replacement of the product for as long as it remains in use
by the customer. In the event of discontinuance of product manufacture, Dell Extended Life Warranty extends until five (5) years after end of product model sales. Warranty limits
any power supply, antennae or accessories to one (1) year from date of purchase. Warranty does not include troubleshooting, configuration, or other advanced service provided by
Dell ProSupport. The Extended Life Limited Hardware Warranty is not transferrable. For more information, see dell.com/warranty.