Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo, Dimension, OptiPlex, Inspiron, Latitude, Dell Precision, DellNet, TrueMobile, PowerApp, PowerEdge, PowerConnect, and PowerVault are trademarks of Dell, Inc.; EMC is a registered trademark of EMC Corporation.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.
Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
1Input Source button Push to display the Input Select menu
2
3
4Menu/OK buttonPush to display the TV Menu or to confirm your selection
5
6
Channel up/down button
Volume up/down button
Power button and light
(LED)
IR receiverSenses the signal from the remote control
234
Push to select the previous/next channel or navigate through
the TV Menu
Push to increase/decrease the volume or to select an TV Menu
option
Push to turn the TV on and off
The power light is blue when the TV is on and amber when it is
in power saving mode
5
About Your TV5
Left View
www.dell.com | support.dell.com
1
2
3
4
1S-Video connector (AV Side)Connect devices such as a video game system, a digital camera,
or a DVD player
2Composite video connector
(AV Side)
3Audio connector (Left)Use this connector if you have connected a device to the
4Audio connector (Right)Use this connector if you have connected a device to the
Connect devices such as a VCR or DVD player
composite video connector or the S-Video connector
composite video connector or the S-Video connector
6About Your TV
Bottom View
124 798356
1TV Speaker out connectors Connect speakers
2TV IN connector
(Analog/Digital)
3RS232 connectorFor factory use only
4VOD connectorConnect to the Ethernet cable for Video On Demand(VOD)
5HDMI IN connectorConnect devices such as a DVD player or set-top box
6VGA connector Connect your computer using a VGA cable
7Component audio and
video connectors (AV1 IN)
8Audio-out connectors (L/R) Connect a device such as a VCR if you have connected an antenna or
9Power connectorConnect your power cord
Connect an antenna or a cable TV box using the coaxial cable
(It is a Digital/Analog combo tuner)
*The component audio connectors(AV1 IN - L/R) is shared by
Component and VGA
Connect devices such as a DVD player, set-top box, or cable TV box
*This Audio L/R pair is shared by Component and VGA
cable TV through the TV IN connector
About Your TV7
www.dell.com | support.dell.com
Package Contents
NOTE: If you need additional cables, contact Dell.
Power cord
Antenna (coaxial) cable
Component cable
RCA Audio (L/R) cable
Documentation
8About Your TV
Caring for Your TV
CAUTION: Only a licensed technician should service the TV. Do not disassemble the TV.
CAUTION: Before cleaning the TV, unplug it from the electrical outlet.
•To clean the surface of the panel, lightly dampen a soft, clean, lint-free cloth with water.
•To clean the TV cabinet, use a cloth lightly dampened with a mild detergent.
•Do not use chemicals such as benzene, thinner, ammonia, or any type of abrasive cleaner.
•Do not use compressed air to clean the TV.
About Your TV9
www.dell.com | support.dell.com
10About Your TV
Setting Up Your TV
CAUTION: Before you begin any of the setup procedures described in this section, follow the basic
safety instructions located in the
Proper Location for Your TV
Consider the following environmental factors when you are deciding where to put your TV:
•Ensure you allow adequate ventilation.
•Do not store or use the TV in locations that are exposed to high heat, high humidity, dusty
environment, direct sunlight, or extreme cold.
•Avoid moving the TV between locations with extreme temperature differences. For more
information, see
•Do not subject the TV to severe vibration or high impact conditions. Do not place the TV
inside a car trunk.
•Do not place the TV in a location where water or other liquids could spill on or into the TV.
Specifications
Product Information Guide
on page 41.
.
2
Setting Up Your TV11
www.dell.com | support.dell.com
Connecting Your TV
The tables below provide a description of the connectors on your TV to help you decide which
connectors to use for your various video devices.
NOTE: Before you connect your TV , ensure you have all the proper cables. Some cables may come with
the device you are connecting. For a list of cables that came with your TV, see Package Contents on
page 8. To order additional cables, contact Dell.
Connecting Your Cable TV Box or Antenna
QualityCable and ConnectorWhen to Use
GoodCoaxial cable / TV INCoaxial (RF) cable carries the analog/digital
video and audio signal from the antenna or
cable connector to your TV. The coaxial
connector is labeled TV IN (Analog/Digital).
To locate the TV IN connector, see "Bottom View" on page 7.
Connecting Your Video Devices
QualityCable and ConnectorWhen to Use
GoodComposite cable / Video, Left, RightThe composite connector carries the video signal
through a single pin. If you are using a composite
video connector, you also need to connect
composite audio cables. To locate the composite
connector, see "Left View" on page 6.
12Setting Up Your TV
QualityCable and ConnectorWhen to Use
BetterS-Video cable / S-Video, Left, RightThe S-Video connector splits the video signal into
two signals, black-and-white and color. If you are
using the S-Video connector, you also need to
connect the audio cables. To locate the S-Video
connector, see "Left View" on page 6.
BestComponent (YPbPr) cable / AV1 INThe component connectors split the video signal
into three signals, two color and one black-andwhite. If you are using the component
connectors, you also need to connect the audio
cables. To locate the component connectors, see
"Bottom View" on page 7.
assures that the best video signal is always sent
from source (HDTV signal, DVD player) to the
TV. This is achieved by allowing uncompressed
video and multi-channel audio data to be sent to
the display device through a single cable. To
locate the connector, see "Bottom View" on
page 7.
Setting Up Your TV13
www.dell.com | support.dell.com
Using the TV IN Connector (Coaxial)
1
Turn off the TV and unplug the power cord.
2
Connect the coaxial cable to the
3
Plug in the power cord for the TV and turn on the TV.
4
Enter the
TV Menu
and select
TV IN
TV
connector on the TV.
or
Digital TV
information.
Using the Composite Connector
. See "
Input Select
" on page 24 for more
1
Turn off the TV and unplug the power cord.
2
Connect your device to the TV using the audio and video cable.
3
Plug in the power cords for the TV and devices and turn them on.
4
Enter the
information.
14Setting Up Your TV
TV Menu
select
AV SIDE(Composite)
. See "
Input Select
" on page 24 for more
Using the S-Video Connector
1
Turn off the TV and unplug the power cord.
2
Connect your device using the S-Video and audio cables.
3
Plug in the power cords for the TV and devices and turn them on.
4
Enter the
TV Menu
and select
AV SIDE(S-Video)
. See "
information.
Using the Component Connectors
Input Select
" on page 24 for more
1
Turn off the TV and unplug the power cord.
2
Connect your device using the component video and audio cables.
3
Plug in the power cords for the TV and devices and turn them on.
4
Enter the
TV Menu
and select the
AV1 (Component)
. See "
more information
Input Select
" on page 24 for
Setting Up Your TV15
www.dell.com | support.dell.com
Using the HDMI Connector
1
Turn off the TV and unplug the power cord.
2
Connect your device using the
3
Plug in the power cords for the TV and devices and turn them on.
4
Enter the
TV Menu
and select the
HDMI
HDMI
connector.
. See "
Input Select
information.
Using the VGA Connector
" on page 24 for more
1
Turn off the TV and unplug the power cord.
2
Connect the blue VGA cable to your TV and to your computer.
3
Connect the RCA stereo audio cable (stereo jack to RCA jack cable) to the
connectors(
4
Plug in the power cords for the TV display and devices and turn them on.
5
Enter the
16Setting Up Your TV
L/R
) on the TV and to your computer.
TV Menu
and select the
VGA
.
See "
Input Select
AV1 IN
" on page 24 for more information.
audio
Using the VOD Connector
1
Turn off the TV and unplug the power cord.
2
Connect the Ethernet cable to the
3
Plug in the power cords for the TV and turn on the TV.
VOD
connector on the TV.
Setting Up Your TV17
www.dell.com | support.dell.com
18Setting Up Your TV
Using Your Remote Control
NOTE: The remote control for your Dell™ TV is an optional. If you would like to purchase a remote
control, contact Dell.
Installing Batteries
Before you can use your remote control, install three-AAA batteries.
1
Slide open the battery cover.
2
Install the batteries. Make sure that you match the + and - on the batteries with the + and symbols in the battery compartment.
3
Replace the battery cover.
3
Using Your Remote Control19
Using Your Remote Control
1
www.dell.com | support.dell.com
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
20Using Your Remote Control
1Power Turns the TV on and off
2MENUEnters and exits the TV Main Menu
3OKPress to confirm your selection
4GUIDEDisplays an electronic program guide when using Digital TV
NOTE: Content may vary depending on the broadcaster.
5PICTCycles through the preset options for the Picture menu
6SLEEP Turns on the sleep timer
7PREV CH Returns you to the previously viewed channel
8Vol - Decreases the volume
9CH downPush to view the previous channel
10Number buttonsPress to select a channel
11- (dash)Press to select the sub-channel of Digital TV
12POP/PBPEnters and exits POP or PBP mode
13PIP SELToggles between windows when you use Picture-in-Picture
(PIP), Picture-Outside-Picture (POP), or Picture-By-Picture
(PBP)
14INPUT Enters the Input Select menu
15Arrow buttonsIn the TV Menu, use to navigate through the menus
16INFODisplays information about your TV and channel you are
watching
17AUDIOCycles through the preset Audio options
18WIDE Cycles through the size (aspect ratio) options from the Picture
Settings menu
19MUTEPress to turn the sound on and off
20CH upPush to view the next channel
21Vol +Increases the volume
22ENTERPress to confirm the channel frequency entry
23POSPress to change the position of the PIP, POP, or PBP window
24SWAPSwaps images when using PIP, POP, or PBP
25PIP Enters and exits PIP mode
Using Your Remote Control21
www.dell.com | support.dell.com
Using Your TV With a Universal or Learning Remote Control
Preprogrammed universal remote controls can be programmed to control the following
functions on your Dell TV:
•Power
•Channel Up (+)
•Channel Down (-)
•Volume Up (+)
•Volume Down (-)
•Mute
•Input Select
NOTE: Future preprogrammed universal remote controls may be able to control more functions.
You can program universal remote controls to work with your Dell TV in the following ways:
•If the remote control manual lists codes by manufacturer, use the Philips codes.
•If the remote control has a search function, this function may be used to find the
correct code.
•If the remote control has a learning function, you can program specific buttons on it from
the Dell remote control, in addition to those buttons listed above.
NOTE: For additional information, see the documentation that came with your universal or learning
remote control.
22Using Your Remote Control
Using the TV Menu
4
Your TV has the
the image and audio settings, select to view Picture-In-Picture, Picture-Outside-Picture, and
Picture-By-Picture, and set parental controls.
TV Menu
that allows you to select the proper input source, make adjustments to
Using Your Remote Control With the TV Menu
NOTE: You can access and make selections to the TV Menu using the volume and channel buttons on
the front panel of the TV or you can use the remote control. Except where noted, this section describes
how to use the TV Menu with the buttons on the front panel of the TV.
To enter the
1
Eight icons appear along the bottom of the screen.
2
Use the volume up and down buttons to move between the icons. The icon appears
highlighted and a new menu appears as you move through the menu.
3
To select an option, push the OK button when the icon is highlighted.
4
Use the channel up and down buttons to move through the various settings.
NOTE: A red arrow appears next to the setting as you navigate through the options. A check mark
appears next to the option that you have selected.
5
Use the volume up and down buttons or the OK button to adjust or select settings.
TV Menu
, press the
Menu
button.
NOTE: You can select Exit or press the Menu button at any time to return to the main menu.
After you have made your selections, push the
6
7
To ex it the
FILE LOCATION: C:\Documents and Settings\parksh2\¼ŸÝ¡ »¦³È\×¢¡æ\Dell\W3202_3706MH_DAO_OM\MH_DAO_proof
TV Menu
, select the
Exit
icon and press the OK button.
(050622)\W3202MH_DAO_e40.fm
Menu
button to return to the main menu.
Using the TV Menu23
www.dell.com | support.dell.com
FILE LOCATION: C:\Documents and Settings\parksh2\¼ŸÝ¡ »¦³È\×¢¡æ\Dell\W3202_3706MH_DAO_OM\MH_DAO_proof
Selecting Your TV Menu Language
1
Press
Menu
2
Select
Setup
3
In the
Setup
Menu to appear in.
to enter the
.
menu, select
TV Menu
Language
.
and scroll to select the language that you want the TV
Input Select
The
Input Select
video equipment connected. Press
Input Select
If you are using the
Menu
, select
TV IN
connector, you need to preset the viewable channels for the
the location of the
AV1 (COMPONENT) — Select when you have a video device, such as a DVD player, set-top box,
or cable TV box connected to the component audio and video connectors on the bottom of the TV.
See "
Bottom View
IN
).
AV SIDE (COMPOSITE) —
connected to the composite video and audio connectors on the left side of the TV. See "
on page 6 for the location of the composite video and audio connectors (
AV SIDE (S-VIDEO) — Select when you have a video device, such as a VCR, connected to the S-
Video and audio connectors on the left side of the TV. See "
the S-Video and audio connectors (
menu allows you to select the proper source based on how you have your TV and
Input Source
menu. You can also press
Digital TV
Setup
, select
TV IN
" on page 7 for the location of the component audio and video connectors (
input source, you can preset the viewable channels. Go to the
Channel Setup
connector.
Select when you have a video device, such as a video game system,
Menu
S-Video, Left, Right
button on the front panel to go directly to the
and select
, and then select
Input Select
Channel Search
VGA — Select when you have your
computer connected to the
See "
Bottom View
location of the
HDMI —
a device, such as a DVD player using the
HDMI
page 7 for the location of the
connector.
DIGITAL TV —
your antenna connected to the
connector. See "
Left View
).
from the main menu.
. If you are using the
Digital TV
VGA
Select when you have connected
connector. See "
Bottom View
" on page 6 for the location of
input source.
" on page 7 for the
connector.
Bottom View
Select when you have
Video, Left, Right
VGA
connector.
HDMI
TV IN
" on page 7 for
Left View
).
Main
" on
AV1
"
DELL CONFIDENTIAL – PRELIMINARY 10/7/05 – FOR PROOF ONLY
24Using the TV Menu
FILE LOCATION: C:\Documents and Settings\parksh2\¼ŸÝ¡ »¦³È\×¢¡æ\Dell\W3202_3706MH_DAO_OM\MH_DAO_proof
SHOW INPUTS — Show Inputs
allows you to select
Active
and
All. Active
searches for which
connectors are being used. The available input sources appear in white and input sources that are
not available appear in grey.
All
shows all the input sources and allows you to select all the input
sources even if you do not have a device connected.
NOTE: In TV Menu Settings, located in the Setup menu, you can set the Input Select to display the
device that you have attached. For example, AV1 (COMPONENT) would say DVD when you view the Input
Select menu.
Picture Settings
The
Picture Settings
brightness.
allow you to adjust the appearance of the image including color and
If you select one of the following preset image
settings the individual settings are
automatically updated.
•Movies
•Sports
•Weak Signal
•Multimedia
If you select
individual settings, such as
Color
Color Temperature
The
•
Natural
•
Normal
•
Blue
•
Red
Personal
, you can adjust the
Brightness
.
presets are:
: the native panel temperature
: 6500K
: 9300K
: 5700K
and
DELL CONFIDENTIAL – PRELIMINARY 10/7/05 – FOR PROOF ONLY
Using the TV Menu25
www.dell.com | support.dell.com
FILE LOCATION: C:\Documents and Settings\parksh2\¼ŸÝ¡ »¦³È\×¢¡æ\Dell\W3202_3706MH_DAO_OM\MH_DAO_proof
Audio Settings
The
Audio Settings
Va r i a bl e
Va r i a bl e
Use
Use
speakers.
if you want to adjust the volume using the TV remote or front panel buttons. Using
adjusts the TV volume out not the volume on an attached audio receiver.
Program
Mute
to turn the TV sound on or off and use
allow you to set the audio to best fit the type of show you are watching.
Midnight Mode — Evens out the large volume
variations between voice and action scenes.
If you select one of the following preset
to select
Stereo, Mono
, or
Equalizer Mode
levels are automatically updated:
•Music
•Theater
•Voice
If you select
individual audio levels, such as
TV Out Volume
adjust the volume using the remote or volume
control on an attached audio receiver. Select
SAP
(Second Audio Program).
Speaker Out
settings, the individual audio
Personal
to turn on or off sound from the
, you can adjust the
— Select
Bass
Fixed
if you want to
and
Tr eb le
.
DELL CONFIDENTIAL – PRELIMINARY 10/7/05 – FOR PROOF ONLY
26Using the TV Menu
FILE LOCATION: C:\Documents and Settings\parksh2\¼ŸÝ¡ »¦³È\×¢¡æ\Dell\W3202_3706MH_DAO_OM\MH_DAO_proof
PIP/PBP/POP
You can view two active sources simultaneously using Picture-In-Picture (
Picture (
POP
), or Picture-By-Picture (
PBP
).
PIP
), Picture-Outside-
The remote control offers the following
PIP/PBP/POP
•Use the
options:
PIP
button or the
POP/ PBP
button on the remote control to turn on
and off
•If you are in
the
PIP, POP
SWAP
, and
PBP
.
PIP, POP
, or
PBP
button on the remote control to
mode, use
switch between the two windows.
•Use the
change which corner of the screen the
POS
button on the remote to
PIP
window appears.
In the
TV Menu
position of the
, you can adjust the
PIP
windows. When you are selecting the horizontal orientation, - moves the
Transparency
, the
Size
, and H (horizontal) and V (vertical)
window left and + moves the window to the right. When you are adjusting the vertical orientation,
0 is at the top of the screen and 100 is at the bottom of the screen.
PIP/PBP/POP Compatibility
When using
PIP/PBP/POP
PIP/PBP/POP
windows.
you can select any of the input sources that appear in the
Secondary
Source
Digital TV
AV1
(Component)
AV SIDE
(Composite)
AV SIDE
(S-Video)
HDMI
VGA
DELL CONFIDENTIAL – PRELIMINARY 10/7/05 – FOR PROOF ONLY
Primary Source
Digital TVAV1AV SIDE
(Composite)
NoNoNoNoYesYes
NoNoNoNoYesYes
NoNoNoNoYesYes
No NoNoNoYes Yes
Yes YesYesYesNoYe s
Yes YesYesYesYesN o
AV SIDE
(S-Video)
HDMIVGA
Using the TV Menu27
www.dell.com | support.dell.com
FILE LOCATION: C:\Documents and Settings\parksh2\¼ŸÝ¡ »¦³È\×¢¡æ\Dell\W3202_3706MH_DAO_OM\MH_DAO_proof
Size
Size
allows you to adjust the appearance of the image.
Use the following settings to adjust the aspect ratio:
Standard
Zoom
4:3 Aspect Ratio
Wide
Full Screen
Horizontal Shift
— Best selection for viewing digital HDTV, 16:9 or 22:9 DVD movies.
— Best selection for viewing TV, VCR or 4:3 DVD movie.
— Best selection for viewing TV, VCR or 4:3 DVD movie.
— Best selection for viewing digital HDTV, 16:9 and 22:9 DVD movies.
— Best selection for viewing digital HDTV or 16:9 DVD movies.
—Adjust the horizontal placement of the image.
NOTE:
Most DVDs have information about the supported aspect ratio on the case.
DELL CONFIDENTIAL – PRELIMINARY 10/7/05 – FOR PROOF ONLY
28Using the TV Menu
FILE LOCATION: C:\Documents and Settings\parksh2\¼ŸÝ¡ »¦³È\×¢¡æ\Dell\W3202_3706MH_DAO_OM\MH_DAO_proof
Parental Control
Parental Control
allows you to block certain channels or programs so children cannot view
programs that are not age appropriate.
To enter the
code
3355
Parental Control
. "
Setting an
menu, you need an access code. The first time you enter, use access
Access Code" on
page 29 for information on creating a new access code.
You can set the following options to block content:
•
Block Control — Turns on or off all your parental control settings
•
Channel Lock —
•
Movie Rating —
Blocks selected channels
Blocks movies based on their rating (G, PG, PG-13, R, NC-17, X, and
Unrated)
•
TV Rating — Blocks TV shows based on their rating (TV-Y, Y7, G, PG, 14, MA, and No
Rating)
NOTE: You can use Clear All to unblock the channels and programs that you have set.
Setting an Access Code
After you enter the
code. If for any reason you lose or forget your access code, you can use the default code.
1
In the
2
Using the number pad on the remote control, enter a new access code.
3
Select
Parental Contro
Parental Control
Exit
.
DELL CONFIDENTIAL – PRELIMINARY 10/7/05 – FOR PROOF ONLY
l menu for the first time, you can set your own four-digit access
menu, select
Change Code
.
Using the TV Menu29
www.dell.com | support.dell.com
FILE LOCATION: C:\Documents and Settings\parksh2\¼ŸÝ¡ »¦³È\×¢¡æ\Dell\W3202_3706MH_DAO_OM\MH_DAO_proof
Setup
Setup
allows you to adjust the appearance of the
the language of the
restore factory settings.
antenna or cable connected to your TV.
If you are using the
Search
to search the viewable channels. While searching the channels, press the
button on the remote control to stop the searching. Select
the signal is weak or distorted, select
If you are using the
input source.
Timer Settings
Select
Closed Caption
TV Menu
Digital TV
TV IN
allows you to set the time which the TV turns on and off automatically.
(see "
Selecting Your TV Menu Language
input source, you can preset the viewable channels. Select
Fine Tuning
connector, you need to preset the viewable channels for the
to turn on and off closed captioning and set several other CC options.
TV Menu
In the
Hold Time
of time the TV Menu appears.The maximum
amount of time is 60 seconds.
You can select
buttons on the bottom panel. When this option
is enabled, only the power button functions.
Hold the volume up and the channel up
buttons together for 10 seconds to unlock the
buttons.
Channel Setup
for individual channels and preset the viewable
channels. Select
to fine-tune the channel manually.
, preset viewable cable channels, change
" on page 24), and to
TV Menu Settings
to increase or decrease the amount
TV Button lock
allows you adjust the settings
Antenna/Cable
Channel Edit
menu, use
to edit the channels. If
TV Menu
to lock the
to select the
Menu
or
Digital TV
Channel
OK
DELL CONFIDENTIAL – PRELIMINARY 10/7/05 – FOR PROOF ONLY
30Using the TV Menu
Troubleshooting Your TV
CAUTION: If at any time you see smoke or sparks coming from your TV, contact Dell. Do not try to
perform any troubleshooting steps.
Troubleshooting Tips
NOTE: Some problems may be related to your device. See the documentation for any devices connected
to your TV.
Most problems with your TV may be caused by not having the correct input selection. Each
connector on the TV (left and bottom) is associated with an input selection, which are labeled
and
AV SIDE
•
AV1 (Component)
•
AV SIDE (Composite)
•
AVSIDE (S-Video)
You can also select the following input:
•
DIGITAL TV
•
VGA
•
HDMI
in the
Input Select
— Component connector on the bottom of the TV
— S-Video connector on the left of the TV
— TV IN connector on the bottom of the TV
— VGA connector on the bottom of the TV
— HDMI connector on the bottom of the TV
menu.
— Composite connector on the left of the TV
AV1
5
Troubleshooting Your TV31
www.dell.com | support.dell.com
General Problems
ProblemPossible Solution
Poor picture quality while watching TV
and using a device such as a DVD
player or a VCR
Poor picture quality when using a
device connected to the TV IN
(coaxial) connector
1
Check the aspect ratio settings in the TV Menu. Press the
button and select
Menu, see "Using the TV Menu" on page 23.
2
Connect the device using a different connector. For example, if
you are experiencing the problem using a composite connector,
try using the component connector.
NOTE:
To connect to a different connector, you need the
appropriate cables for that connector. See your device
documentation for a list of supported connections.
After you connect the device, change the input source in the TV
Menu. See "Input Select" on page 24 for more information.
3
Reset the original factory defaults. Press
Setup
, and then select
4
Adjust the color temperature. Press
Settings
, and then select
NOTE: Some set top boxes offer aspect ratio. See your device
documentation for more information.
1
Ensure TV is selected as the input source in the
menu. See "Input Select" on page 24 for more information.
2
Press
Menu
Setup
. This resets the channels on your TV.
3
Check the aspect ratio settings in the TV Menu. Press the
button and select
Menu, see "Using the TV Menu" on page 23.
4
Reset the original factory defaults. Press
Setup
, and then select
5
Adjust the color temperature. Press
, and then select
Settings
6
The problem may be with your device, contact your service
provider.
Size
. For more information on using the TV
Factory Reset
Color Temperature
buttton, select
Size
. For more information on using the TV
Factory Reset
Color Temperature
Menu
Setup
, and then select
Menu
Menu
.
button, select
Menu
.
button, select
button, select
.
Input Select
Channel
button, select
.
Menu
Picture
Menu
Picture
32Troubleshooting Your TV
ProblemPossible Solution
Nothing appears on my TV1
Ensure the TV is turned on.
2
Verify that all the cables are properly connected to the TV,
including the power cable.
3
Check to see if there is a blue or amber light on the lower,
right-hand corner of the TV. A blue light indicates the TV is on.
An amber light, means the TV is in power save mode.
4
Ensure the proper source is selected in the
Input Select
menu.
See "Input Select" on page 24 for more information.
5
Reconnect any devices that are currently connected to the TV. If
you are using multiple devices, connect and test one device at a
time.
6
Connect another device that you know is working properly.
7
No sound1
Reset the original factory defaults. Press
Setup
, and then select
Factory Reset
Ensure mute is not turned on. Pressing the
.
Menu
button, select
Mute
button on
the remote control turns the mute function on and off.
2
If only certain TV channels do not have sound, then you need to
correct the
Input Select
menu in the TV Menu(see "Input
Select" on page 24).
3
Verify that the audio cables are firmly connected to both the
audio input connectors on your TV and audio output
connectors on your devices. Ensure that the cable colors match
the connectors colors.
4
Also, ensure that the audio cables are connected to the same
row as the video cables. See "About Your TV" on page 5 for the
location of the connectors.
5
Connect the device using a different connector. For example,
if you are experiencing the problem using a composite
connector, try using the component connector.
NOTE:
To connect to a different connector, you need the
appropriate cables for that connector. See your device
documentation for a list of supported connections.
After you connect the device, change the input source in the TV
Menu. See "Input Select" on page 24 for more information.
6
Test the device on a different TV.
7
If you are using
is selected. Press
PIP/PBP/POP
Menu
button, and select
, ensure the proper
PIP/PBP/POP.
Audio Source
Double image or no image with DVDTurn off the progressive scan on the DVD player. Your Dell™ TV
offers built-in deinterlacer that is equal to or better quality than
the deinterlacer on your DVD player. For more information
about progressive scan on your DVD player, see the
documentation for your DVD player
Troubleshooting Your TV33
www.dell.com | support.dell.com
ProblemPossible Solution
Picture is too dim or too bright
The screen is not centered correctly1
Screen has one or more lines1
Update the color settings in the TV Menu. Press
select
Picture Settings
Update the size settings in the TV Menu. Press
and select
2
Reset the original factory defaults. Press
Setup
Size
, and then select
Check the aspect ratio settings in the TV Menu. Press the
button and select
Menu, see "Using the TV Menu" on page 23.
2
Ensure the proper source is selected in the
See "Input Select" on page 24 for more information.
3
Try connecting a different device. Ensure that you properly
connect the cables and update the input source in the TV
Menu.
4
Update the size settings in the TV Menu. Press
and select
5
Reset the original factory defaults. Press
Setup
The front panel buttons do not workCheck the
Size
, and then select
TV Menu
Menu button, select Setup.
Use the front panel buttons to unlock the
panel buttons:
1
Press the
Menu
A message appears stating that the TV Menu and buttons are
locked.
2
While the message is on the screen, press the volume up and
channel up buttons on the
seconds.
A message appears stating that the TV Menu and buttons are
unlocked.
The picture is too small1
Adjust the size settings. Press
2
This may be a problem with your device. See the
documentation for the device.
Menu
button and
.
Menu
button
.
Menu
button, select
Factory Reset
Size
. For more information on using the TV
.
Input Select
Menu
button
.
Menu
button, select
Factory Reset
.
to see if the buttons have been locked. Press
TV Menu
and front
button.
front
panel simultaneously for 3
Menu
button, and select
Size
Menu
menu.
.
34Troubleshooting Your TV
TV Menu Messages
While using your TV, the following messages may appear.
MessagePossible Solution
Auto AdjustNo action required, the TV is performing an auto adjustment.
Out of RangeCheck the optimal resolution settings.
You may need to download a new video driver. For more
information, go to support.dell.com.
No Video Input1
TV Buttons LockedTo unlock, press Menu button, select Setup.
Self TestAppears for computer source when there is nothing plugged in.
Check all cables are properly connected.
2
Ensure the proper source is selected in the
See "Input Select" on page 24 for more information.
Use the front panel buttons to unlock the
panel buttons:
1
Press the
A message appears stating that the TV Menu and buttons are
locked.
2
While the message is on the screen, press the volume up and
channel up buttons on the front panel simultaneously for 10
seconds.
A message appears stating that the TV Menu and buttons are
unlocked.
Select VGA from Input Select menu and nothing is plugged in.
Plug a computer in to the VGA.
Menu
button.
Input Select
TV Menu
menu.
and front
Remote Control Problems
ProblemPossible Solution
1
The TV does not respond when using
the remote control
Point the remote control directly at the lower right corner of the
TV. Be sure that nothing is blocking the front of the TV. For the
location of the IR, see "Front View" on page 5.
2
Verify that the batteries are properly installed.
3
If the batteries are old, install new batteries.
NOTE: Bright lights or other infrared devices may interfere with
your remote control and IR on the TV.
Troubleshooting Your TV35
Using the Self-Test Feature when Connected to a Computer
When your computer is connected to the TV through VGA connector you can use the self-test
feature to check whether your TV is functioning properly. If your TV and computer are properly
connected but the TV screen remains dark, run the TV self-test by performing the following steps:
1
Turn off both your computer and the TV.
2
Unplug the video cable from the back of the computer.
3
Turn on the TV.
If the TV cannot sense a video signal and is working correctly, the floating "
Feature Check
" dialog box appears on the screen (against a black background).
Dell - Self-Test
www.dell.com | support.dell.com
While in self-test mode, the power light remains blue and the self-test pattern scrolls through
the screen continually. This box also appears during normal system operation if the video
cable becomes disconnected or damaged.
4
Turn off your TV and reconnect the video cable; then turn on both your computer and the
TV. If your TV screen remains blank, the problem may be with your computer or graphic card.
See your computer documentation for more information.
Problems When Using the TV as a Monitor
NOTE: You can only connect your computer to the TV using a VGA connector.
ProblemPossible Solution
The picture is off-centered or too small1
Use
Auto Adjust
button to enter the TV Menu, select
select
Auto Adjust
2
Check the optimal resolution settings.
You may need to download a new video driver. For more
information, go to
to check the
.
support.dell.com
Image Settings
Image Settings
.
. Press
NOTE: Some older video cards may not support the resolution
settings for the TV.
Menu
, and then
36Troubleshooting Your TV
ProblemPossible Solution
No audio1
Ensure the green audio cable is connected to audio connectors
on the TV and on the computer. For the location of the
connector on the TV, see "Using the VGA Connector" on
page 16. See your computer documentation for the location of
connectors on your computer.
2
Ensure the volume on the computer is not muted.
3
Verify that sound on your computer is working by checking the
speakers. See your computer documentation for information on
troubleshooting your computer.
4
Disconnect the TV from the computer and test to see if the TV
volume works.
PIP/PBP/POP not working 1
Ensure the settings in the TV Menu are properly set. Press
Menu
button to enter the TV Menu, and select
2
Swap the video and audio source.
PIP/PBP/POP
No videoNOTE: If you see a self-test, it means there is a problem with
your video card or you are using the wrong input source.
1
Ensure the TV is turned on.
2
Verify that all the cables are properly connected to the TV,
including the power cable.
3
Check to see if there is a blue or amber light on the lower,
right-hand corner of the TV. A blue light indicates the TV is on.
An amber light, means the TV is in power save mode.
4
Ensure
VGA
is selected in the
Input Select
menu. See "Input
Select" on page 24 for more information.
5
Reconnect the computer.
6
Connect another device that you know is working properly.
7
Reset the original factory defaults. Press
Setup
, and then select
Factory Reset
.
Menu
button, select
.
Troubleshooting Your TV37
www.dell.com | support.dell.com
38Troubleshooting Your TV
Security Features
6
Additional 8X Torx screws
to secure speakers
- (Speakers are optional)
Additional Torx screws (4X)
- Secure TV head
4X non-headed, T10, M5 threaded
screw to bottom of TV stand base
Security Features39
www.dell.com | support.dell.com
2" table top
40Security Features
Specifications for Your TV
General
Model numberW3202MH LCD TV
W3706MH LCD TV
Display typeTFT COLOR Normally Black Premium LCD
Screen size32inch panel (W3202MH)
37inch panel (W3706MH)
Viewable area697.7
Image aspect ratioWide screen
Brightness (typical)450 nits (W3202MH)
Contrast Ratio1000:1 (typical)(W3202MH)
Video Display Capabilities480i
Additional Features:
SAP capable
CC capable
Parental control capable
x
392.3 mm (W3202MH)
x
460.8 mm (W3706MH)
819.6
16:9 resolution
16:9 aspect ratio
500 nits (W3706MH)
800:1 (typical) (W3706MH)
480p
576i
576p
720p
1080i
Ye s
Ye s
Ye s
7
Specifications for Your TV41
www.dell.com | support.dell.com
Physical Dimension
Display (with stand)790 x 568 x 208.7mm (W3202MH)
910.3 x 637.5 x 252.75mm (W3706MH)
Display (no stand)790 x 485.4 x 114.5mm(W3202MH)
910.3 x 552.5 x 114.5mm (W3706MH)
With Speakers933.8 x 568 x 208.7mm (W3202MH)
1074.3 x 637.5 x 252.75mm (W3706MH)
Weight (with stand)21kg (W3202MH)
28kg (W3706MH)
Native Resolution1366 x 768 (WXGA)
HDTV CapableYes
Picture-In-Picture
Picture-In-Picture (PIP)Yes
Picture-Outside-Picture (POP)Yes
Picture-By-Picture (PBP)Yes
Number of Tuners1 (Digital/Analog)
To contact Dell electronically, you can access the following websites:
•www.dell.com
•
support.dell.com
•
premiersupport.dell.com
medium/large business customers, including Premier, Platinum, and Gold customers)
For specific web addresses for your country, find the appropriate country section in the table below.
NOTE: Toll-free numbers are for use within the country for which they are listed.
NOTE: In certain countries, technical support specific to Dell Inspiron™ XPS computers is available at a
separate telephone number listed for participating countries. If you do not see a telephone number listed
that is specific for Inspiron XPS computers, you may contact Dell through the technical support number
listed and your call will be routed appropriately.
When you need to contact Dell, use the electronic addresses, telephone numbers, and codes
provided in the following table. If you need assistance in determining which codes to use, contact a
local or an international operator.
(technical support)
(technical support for educational, government, healthcare, and
Country (City)
International Access Code
Country Code
City Code
AnguillaGeneral Support
Antigua and Barbuda General Support
Argentina (Buenos Aires)
International Access Code: 00
Country Code: 54
City Code: 11
ArubaGeneral Support
Department Name or Service Area,
Website and E-Mail Address
Web si te : www.dell.com.ar
E-mail: us_latin_services@dell.com
E-mail for desktop and portable computers:
la-techsupport@dell.com
E-mail for servers and EMC
la_enterprise@dell.com
Customer Care
Tech Support
Tech Support Services
Sales
E-mail (Australia): au_tech_support@dell.com
E-mail (New Zealand):
nz_tech_support@dell.com
Home and Small Business
Government and Business
Preferred Accounts Division (PAD)
Customer Care
Technical Support (portables and desktops)
Technical Support (servers and workstations)
Corporate Sales
Tran sact ion Sa les
Fax
Austria (Vienna)
International Access Code: 900
Country Code: 43
City Code: 1
We bs it e : support.euro.dell.com
E-mail:
tech_support_central_europe@dell.com
Home/Small Business Sales
Home/Small Business Fax
Home/Small Business Customer Care
Preferred Accounts/Corporate Customer Care
Home/Small Business Technical Support
Preferred Accounts/Corporate Technical
Country (City)
International Access Code
Country Code
City Code
China (Xiamen)
Country Code: 86
City Code: 592
Department Name or Service Area,
Website and E-Mail Address
Technical Support website:
support.dell.com.cn
Technical Support E-mail:
cn_support@dell.com
Customer Care E-mail:
customer_cn@dell.com
Technical Support Fax
Technical Support (Dell™ Dimension™ and
Inspiron)
Technical Support (OptiPlex™, Latitude™, and
Dell Precision™)
Technical Support (servers and storage)
Technical Support (projectors, PDAs, switches,
routers, and so on)
Area Codes,
Local Numbers, and
Toll-Free Numbers
592 818 1350
toll-free: 800 858 2969
toll-free: 800 858 0950
toll-free: 800 858 0960
toll-free: 800 858 2920
Technical Support (printers)
Customer Care
Customer Care Fax
Home and Small Business
Preferred Accounts Division
Large Corporate Accounts GCP
Large Corporate Accounts Key Accounts
Large Corporate Accounts North
Large Corporate Accounts North Government
and Education
Large Corporate Accounts East
Large Corporate Accounts East Government
and Education
Large Corporate Accounts Queue Team
Large Corporate Accounts South
Large Corporate Accounts West
Large Corporate Accounts Spare Parts
We bs it e : support.euro.dell.com
E-mail: czech_dell@dell.com
Technical Support
Customer Care
Fax
Tech Fax
Switchboard
Denmark (Copenhagen)
International Access Code: 00
Country Code: 45
We bs it e : support.euro.dell.com
E-mail: support.euro.dell.com/dk/da/emaildell/
Technical Support for Inspiron XPS computers
only
Technical Support for all other Dell computers
Customer Care (Relational)
Home/Small Business Customer Care
Switchboard (Relational)
Switchboard Fax (Relational)
Switchboard (Home/Small Business)
Switchboard Fax (Home/Small Business)
DominicaGeneral Support
Dominican RepublicGeneral Support
EcuadorGeneral Support
El SalvadorGeneral Support
Finland (Helsinki)
International Access Code: 990
Country Code: 358
City Code: 9
We bs it e : support.euro.dell.com
E-mail: support.euro.dell.com/fi/fi/emaildell/
Technical Support
Customer Care
Fax
Switchboard
Country (City)
International Access Code
Country Code
City Code
France (Paris) (Montpellier)
International Access Code: 00
Country Code: 33
City Codes: (1) (4)
Germany (Langen)
International Access Code: 00
Country Code: 49
City Code: 6103
Department Name or Service Area,
Website and E-Mail Address
Web si te : support.euro.dell.com
E-mail: support.euro.dell.com/fr/fr/emaildell/
Home and Small Business
Technical Support for Inspiron XPS computers
only
Technical Support for all other Dell computers
Customer Care
Switchboard
Switchboard (calls from outside of France)
Sales
Fax
Fax (calls from outside of France)
Corporate
Technical Support
Customer Care
Switchboard
Sales
Fax
Web si te : support.euro.dell.com
E-mail:
tech_support_central_europe@dell.com
Technical Support for Inspiron XPS computers
only
Technical Support for all other Dell computers
Home/Small Business Customer Care
Global Segment Customer Care
Preferred Accounts Customer Care
Large Accounts Customer Care
Public Accounts Customer Care
Switchboard
We bs it e : support.euro.dell.com
E-mail: support.euro.dell.com/gr/en/emaildell/
Technical Support
Gold Service Technical Support
Switchboard
Gold Service Switchboard
Sales
Fax
GrenadaGeneral Support
GuatemalaGeneral Support
GuyanaGeneral Support
Hong Kong
International Access Code: 001
Country Code: 852
We bs it e : support.ap.dell.com
Technical Support E-mail:
apsupport@dell.com
Technical Support (Dimension and Inspiron)
Technical Support (OptiPlex, Latitude, and
Dell Precision)
Technical Support (PowerApp™, PowerEdge™,
PowerConnect™, and PowerVault™)
Customer Care
Large Corporate Accounts
Global Customer Programs
Medium Business Division
Home and Small Business Division
IndiaTechnical Support
Sales (Large Corporate Accounts)
Sales (Home and Small Business)
Area Codes,
Local Numbers, and
Toll-Free Numbers
00800-44 14 95 18
00800-44 14 00 83
2108129810
2108129811
2108129800
2108129812
toll-free: 1-866-540-3355
1-800-999-0136
toll-free: 1-877-270-4609
2969 3188
2969 3191
2969 3196
3416 0910
3416 0907
3416 0908
3416 0912
2969 3105
1600 33 8045
1600 33 8044
1600 33 8046
52Contacting Dell
Country (City)
International Access Code
Country Code
City Code
Ireland (Cherrywood)
International Access Code: 16
Country Code: 353
City Code: 1
Italy (Milan)
International Access Code: 00
Country Code: 39
City Code: 02
JamaicaGeneral Support (dial from within Jamaica
Department Name or Service Area,
Website and E-Mail Address
Web si te : support.euro.dell.com
E-mail: dell_direct_support@dell.com
Technical Support for Inspiron XPS computers
only
Technical Support for all other Dell computers
U.K. Technical Support (dial within U.K. only)
Home User Customer Care
Small Business Customer Care
U.K. Customer Care (dial within U.K. only)
Corporate Customer Care
Corporate Customer Care (dial within U.K.
only)
Ireland Sales
U.K. Sales (dial within U.K. only)
Fax/Sales Fax
Switchboard
Web si te : support.euro.dell.com
E-mail: support.euro.dell.com/it/it/emaildell/
Country (City)
International Access Code
Country Code
City Code
Japan (Kawasaki)
International Access Code: 001
Country Code: 81
City Code: 44
Korea (Seoul)
International Access Code: 001
Country Code: 82
City Code: 2
Department Name or Service Area,
Website and E-Mail Address
We bs it e : support.jp.dell.com
Technical Support (servers)
Technical Support outside of Japan (servers)
Technical Support (Dimension and Inspiron)
Technical Support outside of Japan
(Dimension and Inspiron)
Technical Support (Dell Precision, OptiPlex,
and Latitude)
Technical Support outside of Japan (Dell
Precision, OptiPlex, and Latitude)
Technical Support (PDAs, projectors, printers,
routers)
Technical Support outside of Japan (PDAs,
projectors, printers, routers)
Faxbox Service
24-Hour Automated Order Service
Customer Care
Business Sales Division (up to 400 employees)
Preferred Accounts Division Sales (over 400
employees)
Large Corporate Accounts Sales (over 3500
employees)
Public Sales (government agencies, educational
institutions, and medical institutions)
Global Segment Japan
Individual User
Switchboard
Technical Support
Sales
Customer Service (Penang, Malaysia)
Fax
Switchboard
Technical Support (Electronics and
Web si te : support.euro.dell.com
E-mail: tech_be@dell.com
Technical Support (Brussels, Belgium)
Home/Small Business Sales (Brussels, Belgium)
Corporate Sales (Brussels, Belgium)
Customer Care (Brussels, Belgium)
Fax (Brussels, Belgium)
Switchboard (Brussels, Belgium)
Technical Support
Customer Service (Xiamen, China)
Transaction Sales (Xiamen, China)
Web si te : support.ap.dell.com
Technical Support (Dell Precision, OptiPlex,
and Latitude)
Technical Support (Dimension, Inspiron, and
Electronics and Accessories)
Technical Support (PowerApp, PowerEdge,
PowerConnect, and PowerVault)
Customer Service (Penang, Malaysia)
Tran sa ct io n Sa le s
Corporate Sales
Country (City)
International Access Code
Country Code
City Code
New Zealand
International Access Code: 00
Country Code: 64
NicaraguaGeneral Support
Norway (Lysaker)
International Access Code: 00
Country Code: 47
Pan amaGeneral Support
PeruGeneral Support
Poland (Warsaw)
International Access Code: 011
Country Code: 48
City Code: 22
Department Name or Service Area,
Website and E-Mail Address
E-mail (New Zealand):
nz_tech_support@dell.com
E-mail (Australia): au_tech_support@dell.com
Technical Support (for desktop and portable
computers)
Technical Support (for servers and
workstations)
Home and Small Business
Government and Business
Sales
Fax
Web si te : support.euro.dell.com
E-mail:
support.euro.dell.com/no/no/emaildell/
Technical Support
Relational Customer Care
Home/Small Business Customer Care
Switchboard
Fax Switchboard
Web si te : support.euro.dell.com
E-mail: pl_support_tech@dell.com
Customer Service Phone
Customer Care
Sales
Customer Service Fax
Reception Desk Fax
Switchboard
We bs it e : support.euro.dell.com
E-mail: support.euro.dell.com/pt/en/emaildell/
Technical Support
Customer Care
Sales
Fax
Puerto RicoGeneral Support
St. Kitts and NevisGeneral Support
St. LuciaGeneral Support
St. Vincent and the
General Support
Grenadines
Singapore (Singapore)
International Access Code: 005
Country Code: 65
We bs it e : support.ap.dell.com
Technical Support (Dimension, Inspiron, and
Electronics and Accessories)
Technical Support (OptiPlex, Latitude, and
Dell Precision)
Technical Support (PowerApp, PowerEdge,
PowerConnect, and PowerVault)
Customer Service (Penang, Malaysia)
Tran sact ion Sa les
Corporate Sales
Slovakia (Prague)
International Access Code: 00
Country Code: 421
We bs it e : support.euro.dell.com
E-mail: czech_dell@dell.com
Technical Support
Customer Care
Fax
Tech Fax
Switchboard (Sales)
Area Codes,
Local Numbers, and
Toll-Free Numbers
707200149
800 300 413
800 300 410 or
800 300 411 or
800 300 412 or
21 422 07 10
21 424 01 12
1-800-805-7545
toll-free: 1-877-441-4731
1-800-882-1521
toll-free: 1-877-270-4609
toll-free: 1800 394 7430
toll-free: 1800 394 7488
toll-free: 1800 394 7478
604 633 4949
toll-free: 1 800 394 7412
toll-free: 1 800 394 7419
02 5441 5727
420 22537 2707
02 5441 8328
02 5441 8328
02 5441 7585
58Contacting Dell
Country (City)
International Access Code
Country Code
City Code
South Africa (Johannesburg)
International Access Code:
09/091
Country Code: 27
City Code: 11
Southeast Asian and Pacific
Countries
Spain (Madrid)
International Access Code: 00
Country Code: 34
City Code: 91
Sweden (Upplands Vasby)
International Access Code: 00
Country Code: 46
City Code: 8
Department Name or Service Area,
Website and E-Mail Address
Web si te : support.euro.dell.com
E-mail: dell_za_support@dell.com
Gold Queue
Technical Support
Customer Care
Sales
Fax
Switchboard
Customer Technical Support, Customer
Service, and Sales (Penang, Malaysia)
Web si te : support.euro.dell.com
E-mail: support.euro.dell.com/es/es/emaildell/
Home and Small Business
Technical Support
Customer Care
Sales
Switchboard
Fax
Corporate
Technical Support
Customer Care
Switchboard
Fax
Web si te : support.euro.dell.com
E-mail: support.euro.dell.com/se/sv/emaildell/
Technical Support
Relational Customer Care
Home/Small Business Customer Care
Employee Purchase Program (EPP) Support
Technical Support Fax
Sales
International Access Code: 00
Country Code: 41
City Code: 22
We bs it e : support.euro.dell.com
E-mail:
Tech_support_central_Europe@dell.com
E-mail for French-speaking HSB and Corporate
Customers:
support.euro.dell.com/ch/fr/emaildell/
Technical Support (Home and Small Business)
Technical Support (Corporate)
Customer Care (Home and Small Business)
Customer Care (Corporate)
Fax
Switchboard
Ta i w a n
International Access Code: 002
Country Code: 886
We bs it e : support.ap.dell.com
E-mail: ap_support@dell.com
Technical Support (OptiPlex, Latitude,
Inspiron, Dimension, and Electronics and
Accessories)
Technical Support (PowerApp, PowerEdge,
PowerConnect, and PowerVault)
Tran sact ion Sa les
Corporate Sales
Thailand
International Access Code: 001
Country Code: 66
We bs it e : support.ap.dell.com
Technical Support (OptiPlex, Latitude, and
Dell Precision)
Technical Support (PowerApp, PowerEdge,
PowerConnect, and PowerVault)
Customer Service (Penang, Malaysia)
Corporate Sales
Tran sact ion Sa les
Trinidad/TobagoGeneral Support
Turks and Caicos IslandsGeneral Support
Area Codes,
Local Numbers, and
Toll-Free Numbers
0844 811 411
0844 822 844
0848 802 202
0848 821 721
022 799 01 90
022 799 01 01
toll-free: 00801 86 1011
toll-free: 00801 60 1256
toll-free: 00801 65 1228
toll-free: 00801 651 227
toll-free: 1800 0060 07
toll-free: 1800 0600 09
604 633 4949
toll-free: 1800 006 009
toll-free: 1800 006 006
1-800-805-8035
toll-free: 1-866-540-3355
60Contacting Dell
Country (City)
International Access Code
Country Code
City Code
U.K. (Bracknell)
International Access Code: 00
Country Code: 44
City Code: 1344
UruguayGeneral Support
Department Name or Service Area,
Website and E-Mail Address
Web si te : support.euro.dell.com
Customer Care website:
support.euro.dell.com/uk/en/ECare/Form/Home.asp
E-mail: dell_direct_support@dell.com
Technical Support (Corporate/Preferred
Accounts/PAD [1000+ employees])
Technical Support (direct and general)
Global Accounts Customer Care
Home and Small Business Customer Care
Corporate Customer Care
Preferred Accounts (500–5000 employees)
Customer Care
Central Government Customer Care
Local Government & Education Customer
Care
Health Customer Care
Home and Small Business Sales
Corporate/Public Sector Sales
Home and Small Business Fax
Automated Order-Status Service
AutoTech (portable and desktop computers)
Consumer (Home and Home Office)
Technical Support
Customer Service
DellNet™ Service and Support
Employee Purchase Program (EPP) Customers
Financial Services website:
[DPA])
Business
Customer Service and Technical Support
Employee Purchase Program (EPP) Customers
Printers and Projectors Technical Support
Public (government, education, and healthcare)
Customer Service and Technical Support
Employee Purchase Program (EPP) Customers
Dell Sales
Dell Outlet Store (Dell refurbished computers)
Software and Peripherals Sales
Spare Parts Sales
Extended Service and Warranty Sales
Fax
Dell Services for the Deaf, Hard-of-Hearing, or
Speech-Impaired
U.S. Virgin IslandsGeneral Support
Ve ne zu e laGeneral Support
1Bouton Source d’entréeAppuyez sur ce bouton pour afficher le menu Sélection entrée.
2
3
4Bouton Menu/OK
5
6
Bouton chaîne +/-
Bouton volume +/-
Bouton et voyant (LED)
d’alimentation
Récepteur IR (infrarouge) Reçoit le signal émis par la télécommande.
234
Appuyez sur ce bouton pour sélectionner la chaîne
précédente/suivante ou naviguer dans le menu TV.
Appuyez sur ce bouton pour augmenter/diminuer le volume
ou pour sélectionner une option du menu TV.
Appuyez sur ce bouton pour afficher le menu TV ou pour
confirmer votre sélection.
Appuyez sur ce bouton pour allumer et éteindre le téléviseur.
Le voyant d’alimentation est bleu lorsque le téléviseur est
allumé, et orange lorsqu’il est en veille.
5
À propos de votre téléviseur69
Vue du côté gauche
www.dell.com | support.dell.com
1
2
3
4
1Connecteur S-Vidéo (latéral AV)Branchez des périphériques, tels qu’un système de jeux vidéos,
un appareil photo numérique ou un lecteur de DVD.
2Connecteur vidéo composite
(latéral AV)
3Connecteur audio (gauche)Utilisez ce connecteur si vous avez branché un périphérique sur
4Connecteur audio (droit)Utilisez ce connecteur si vous avez branché un périphérique sur
Branchez des périphériques, tels qu’un magnétoscope ou un
lecteur de DVD.
le connecteur vidéo composite ou le connecteur S-Vidéo.
le connecteur vidéo composite ou le connecteur S-Vidéo.
70À propos de votre téléviseur
Vue du bas
124 798356
1Connecteurs de sortie
haut-parleurs TV
2Connecteur TV IN
(Analog/Digital)
3Connecteur RS232Réservé à l’installation en usine.
4Connecteur VODBranchez sur le câble Ethernet pour la vidéo à la demande (VOD).
5Connecteur HDMI INBranchez des périphériques, tels qu’un lecteur de DVD ou un boîtier
6Connecteur VGABranchez votre ordinateur à l’aide d’un câble VGA.
Branchez une antenne ou un récepteur réseau câblé à l’aide du
câble coaxial.
(Il s’agit d’un syntoniseur combiné numérique/analogique).
décodeur..
*Les connecteurs audio composants (AV1 IN - L/R) sont partagés par
Composant et VGA.
Branchez des périphériques tels qu’un lecteur de DVD, un boîtier
décodeur ou un récepteur réseau câblé.
*Cette paire audio L/R est partagée par Composant et VGA.
Branchez un périphérique tel qu’un magnétoscope si vous avez
raccordé une antenne ou le câble TV au connecteur TV IN.
À propos de votre téléviseur71
www.dell.com | support.dell.com
Contenu de la boîte
REMARQUE : Si vous avez besoin de câbles supplémentaires, contactez Dell.
Cordon d’alimentation
Câble d’antenne (coaxial)
Câble composant
Câble audio RCA (L/R)
Documentation
72À propos de votre téléviseur
Précautions à prendre avec votre téléviseur
PRÉCAUTION : Seul un technicien agréé doit réviser le téléviseur. Ne démontez pas le téléviseur.
PRÉCAUTION : Avant de nettoyer le téléviseur, débranchez-le.
•Pour nettoyer l’écran, humectez légèrement un chiffon doux, propre et sans peluche avec
de l’eau.
•Pour nettoyer le coffre du téléviseur, utilisez un chiffon légèrement imprégné de
détergent doux.
•N’utilisez pas de produits chimiques, tels que du benzène, du diluant, de l’ammoniaque
ou tout autre type de produit abrasif.
•N’utilisez pas d’air comprimé pour nettoyer le téléviseur.
À propos de votre téléviseur73
www.dell.com | support.dell.com
74À propos de votre téléviseur
Configuration de votre téléviseur
PRÉCAUTION : Avant de commencer l’une des procédures de configuration décrites dans cette
section, suivez les consignes de sécurité de base fournies dans le
Emplacement approprié pour votre téléviseur
Lorsque vous déciderez de l’emplacement de votre téléviseur, tenez compte des facteurs
environnementaux suivants :
•Veillez à permettre une ventilation correcte.
•Ne stockez ni n’utilisez votre téléviseur dans des endroits exposés à une chaleur élevée, à un
fort taux d’humidité, à un environnement poussiéreux, à la lumière directe du soleil ou à un
froid extrême.
•Évitez de déplacer le téléviseur d’un emplacement à un autre, avec des différences de
températures importantes. Pour plus d’informations, reportez-vous à la section
page 107.
•Ne soumettez pas le téléviseur à d’importantes vibrations ou à des chocs violents. Ne placez
pas le téléviseur dans le coffre d’une voiture.
•Ne placez pas le téléviseur dans un endroit où de l’eau ou d’autres liquides pourraient
l’éclabousser ou pénétrer à l’intérieur.
Guide d’informations du produit
Spécifications
2
.
Configuration de votre téléviseur75
www.dell.com | support.dell.com
Branchement de votre téléviseur
Les tableaux ci-dessous fournissent une description des connecteurs de votre téléviseur qui vous
aidera à identifier le connecteur à utiliser pour divers périphériques vidéo.
REMARQUE : Avant de brancher votre téléviseur, vérifiez que vous disposez des câbles appropriés.
Certains câbles peuvent être fournis avec le périphérique que vous branchez. Pour obtenir une liste des
câbles fournis avec le téléviseur, reportez-vous à la section Contenu de la boîte page 72. Pour
commander des câbles supplémentaires, contactez Dell.
Branchement du récepteur réseau câblé ou de l’antenne
QualitéCâble et connecteurQuand les utiliser
Satisfaisante Câble coaxial / TV INLe câble coaxial (RF) transporte les signaux
vidéo et audio analogiques/numériques du
connecteur de l’antenne ou du câble au
téléviseur. Le connecteur coaxial porte la
mention TV IN (Analog/Digital). Pour situer
le connecteur TV IN, consultez la section
Vue du bas page 71.
Connexion de vos périphériques vidéo
QualitéCâble et connecteurQuand les utiliser
Satisfaisante Câble composite / Vidéo, Left, RightLe connecteur composite transporte le signal
76Configuration de votre téléviseur
vidéo via une seule broche. Si vous utilisez
un connecteur vidéo composite, vous avez
également besoin de brancher des câbles
audio composites. Pour situer le connecteur
composite, consultez la section Vue du cô té
gauche page 70.
QualitéCâble et connecteurQuand les utiliser
BonneCâble S-Vidéo / S-Vidéo, Left, RightLe connecteur S-Vidéo divise le signal vidéo
en deux signaux, un noir et blanc et un
couleur. Si vous utilisez le connecteur
S-Vidéo, vous avez également besoin de
brancher les câbles audio. Pour situer le
connecteur S-Vidéo, consultez la section
Vue du côt é gauc he page 70.
Très bonneCâble composant (YPbPr) / AV1 INLes connecteurs composants divisent le
signal vidéo en trois signaux, deux couleur
et un noir et blanc. Si vous utilisez les
connecteurs composants, vous avez
également besoin de brancher les câbles
audio. Pour situer ces connecteurs,
consultez la section Vue du bas page 71.
Multimedia Interface) garantit l’envoi du
meilleur signal vidéo de la source (signal
HDTV, lecteur de DVD) vers le téléviseur.
Cela est rendu possible par l’envoi au
périphérique d’affichage, via un même câble,
des données vidéo et audio multichaînes non
compressées. Pour situer le connecteur,
consultez la section Vue du bas page 71.
Utilisation du connecteur TV IN (coaxial)
1
Éteignez le téléviseur et débranchez le cordon d’alimentation.
2
Branchez le câble coaxial sur le connecteur
3
Branchez le cordon d’alimentation du téléviseur et allumez le téléviseur.
4
Accédez au
menu TV
reportez-vous à la section
78Configuration de votre téléviseur
TV IN
et sélectionnez TV ou
Sélection entrée
page 88.
du téléviseur.
TV numérique
. Pour plus d’informations,
Utilisation du connecteur composite
1
Éteignez le téléviseur et débranchez le cordon d’alimentation.
2
Raccordez le périphérique au téléviseur à l’aide du câble audio et vidéo.
3
Branchez les cordons d’alimentation du téléviseur et des périphériques et allumez les
appareils.
4
Accédez au
reportez-vous à la section
menu TV
et sélectionnez
Sélection entrée
AV SIDE (Composite)
page 88.
. Pour plus d’informations,
Utilisation du connecteur S-Vidéo
1
Éteignez le téléviseur et débranchez le cordon d’alimentation.
2
Branchez votre périphérique à l’aide des câbles S-Vidéo et audio.
3
Branchez les cordons d’alimentation du téléviseur et des périphériques et allumez les
appareils.
4
Accédez au
reportez-vous à la section
menu TV
et sélectionnez
Sélection entrée
AV SIDE (S-Vidéo)
page 88.
. Pour plus d’informations,
Configuration de votre téléviseur79
www.dell.com | support.dell.com
Utilisation des connecteurs composants
1
Éteignez le téléviseur et débranchez le cordon d’alimentation.
2
Branchez votre périphérique à l’aide des câbles audio et vidéo composants.
3
Branchez les cordons d’alimentation du téléviseur et des périphériques et allumez
les appareils.
4
Accédez au
reportez-vous à la section
menu TV
et sélectionnez
Sélection entrée
AV1 (Composant)
page 88.
. Pour plus d’informations,
Utilisation du connecteur HDMI
1
Éteignez le téléviseur et débranchez le cordon d’alimentation.
2
Branchez votre périphérique à l’aide du connecteur
3 Branchez les cordons d’alimentation du téléviseur et des périphériques et allumez les appareils.
4
Accédez au
section
80Configuration de votre téléviseur
menu TV
Sélection entrée
et sélectionnez
page 88.
HDMI
.
HDMI
. Pour plus d’informations, reportez-vous à la
Utilisation du connecteur VGA
1
Éteignez le téléviseur et débranchez le cordon d’alimentation.
2
Branchez le câble VGA bleu sur votre téléviseur et sur votre ordinateur.
3
Branchez le câble audio stéréo RCA (câble prise stéréo à la prise RCA) aux connecteurs audio
AV1 IN (L/R
4
Branchez les cordons d’alimentation de l’écran de téléviseur et des périphériques et allumez
les appareils.
5
Accédez au
Sélection entrée
) sur votre téléviseur et sur votre ordinateur.
menu TV
et sélectionnez
page 88.
VGA
.
Pour plus d’informations, reportez-vous à la section
Utilisation du connecteur VOD
1
Éteignez le téléviseur et débranchez le cordon d’alimentation.
2
Branchez le câble Ethernet sur le connecteur
3
Branchez les cordons d’alimentation du téléviseur et allumez le téléviseur.
VOD
du téléviseur.
Configuration de votre téléviseur81
www.dell.com | support.dell.com
82Configuration de votre téléviseur
Utilisation de votre télécommande
REMARQUE : La télécommande de votre téléviseur Dell™ est en option. Si vous souhaitez en acheter
une, contactez Dell.
Installation des piles
Avant d’utiliser votre télécommande, installez les trois piles AAA.
1
Ouvrez le capot du compartiment à piles en le faisant glisser.
2
Installez les piles. Assurez-vous que vous avez bien fait correspondre le + et le – des piles avec
les symboles + et – du compartiment à piles.
3
Remettez le capot en place.
3
Utilisation de votre télécommande83
Utilisation de votre télécommande
1
www.dell.com | support.dell.com
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
84Utilisation de votre télécommande
1AlimentationAllume et éteint le téléviseur.
2MENUOuvre et quitte le menu principal du téléviseur.
3OKAppuyez sur ce bouton pour confirmer votre sélection.
4GUIDEAffiche un guide des programmes électroniques lorsque vous utilisez la
télévision numérique. REMARQUE : Le contenu peut varier en
fonction du diffuseur.
5PICT (Image)Navigue à travers les options de réglage dans le menu Image.
6SLEEP (Veille)Allume l’horloge de mise en veille.
7PREV CH
(Chaîne sélectionnée
précédemment)
8Vol -Diminue le volume.
9CH down
(Chaîne précédente)
10Boutons numérotésAppuyez sur un de ces boutons pour sélectionner une chaîne.
11- (tiret)Appuyez sur ce bouton pour sélectionner le sous-canal de TV
12POP/PBPOuvre et quitte le mode POP ou PBP.
13PIP SELNavigue entre les fenêtres lorsque vous utilisez l’incrustation d’image
14ENTRÉEPermet d’accéder au menu Sélection entrée.
15Boutons flèchePermet de naviguer dans les sous-menus du menu TV.
16INFO Affiche des informations sur le téléviseur et sur la chaîne que vous
17SONNavigue à travers les options de réglage Son.
18LARGENavigue à travers les options de taille (format de l’image) dans le menu
19SILENCIEUXAppuyez sur ce bouton pour couper ou rétablir le son.
20CH up
(Chaîne suivante)
21Vol +Augmente le volume.
22ENTRÉEAppuyez sur ce bouton pour confirmer l’entrée de fréquence de canal.
23POSAppuyez sur ce bouton pour changer la position de la fenêtre PIP, POP
24SWAP (Permutation)Permute les images lors de l’utilisation des PIP, POP ou
25PIPOuvre et quitte le mode PIP.
Vous renvoie à la chaîne sélectionnée précédemment.
Appuyez sur ce bouton pour voir la chaîne précédente.
numérique.
(PIP), les fonctions Picture-Outside-Picture (POP) ou
Picture-By-Picture (PBP).
regardez.
Paramètres d’image.
Appuyez sur ce bouton pour voir la chaîne suivante.
ou PBP.
PBP.
Utilisation de votre télécommande85
www.dell.com | support.dell.com
Utilisation de votre téléviseur avec une télécommande
universelle ou intelligente
Les télécommandes universelles préprogrammées peuvent être programmées pour contrôler les
fonctions suivantes de votre téléviseur Dell :
•Alimentation
•Chaîne suivante (+)
•Chaîne précédente (-)
•Monter le volume (+)
•Baisser le volume (-)
•Mute (silencieux)
•Sélection entrée
REMARQUE : Les futures télécommandes universelles préprogrammées seront capables de contrôler
davantage de fonctions.
Vous pouvez programmer les télécommandes universelles pour votre téléviseur Dell des façons
suivantes :
•Si le manuel de la télécommande répertorie les codes par fabricant, utilisez les codes Philips.
•Si la télécommande possède une fonction de recherche, vous pouvez l’utiliser pour trouver le
code correct.
•Si la télécommande possède une fonction d’apprentissage, vous pouvez programmer des
boutons spécifiques à partir de la télécommande Dell, en plus des boutons répertoriés
ci-dessus.
REMARQUE : Pour plus d’informations, reportez-vous à la documentation fournie avec votre
télécommande universelle.
86Utilisation de votre télécommande
Utilisation du menu TV
4
Votre téléviseur possède un
appropriée, de régler les paramètres image et audio, de sélectionner le mode PIP, POP ou PBP,
et de régler les contrôles parentaux.
menu TV
qui vous permet de sélectionner la source d’entrée
Utilisation de votre télécommande avec le menu TV
REMARQUE : Vous pouvez accéder au menu TV et y faire des sélections en utilisant les boutons de
volume et de chaînes situés sur le panneau avant du téléviseur ou sur votre télécommande. Sauf mention
particulière, cette section décrit essentiellement comment utiliser le menu TV avec les boutons du
panneau avant du téléviseur.
Pour accéder au
1
Huit icônes apparaissent alignées en bas de l’écran.
2
Utilisez les boutons d’augmentation et de réduction du volume pour passer d’une icône à
l’autre. Lorsque vous naviguez dans le menu, l’icône sélectionnée se met en surbrillance et
un nouveau menu s’affiche.
3
Pour sélectionner une option, appuyez sur le bouton OK lorsque l’icône est en surbrillance.
4
Utilisez les boutons de changement de chaîne pour passer d’un paramètre à l’autre.
menu TV
, appuyez sur le bouton
Menu
.
REMARQUE : Une flèche rouge apparaît en regard du paramètre lorsque vous naviguez à travers les
options. Une coche apparaît près de l’option sélectionnée.
Utilisez les boutons d’augmentation et de réduction du volume ou le bouton OK pour régler
5
ou sélectionner les paramètres.
REMARQUE : Vous pouvez sélectionner Quitter ou appuyez sur le bouton Menu à tout moment pour
retourner au menu principal.
6
Après avoir fait vos sélections, appuyez sur le bouton
7
Pour quitter le
menu TV
, sélectionnez l’icône
Menu
pour retourner au menu principal.
Quitter
, puis appuyez sur le bouton
OK
Utilisation du menu TV87
.
Sélection de la langue du menu TV
1
Appuyez sur
2
Sélectionnez
3
Dans le menu
la langue voulue pour le menu TV.
Menu
pour accéder au
Configur.
Configur
menu TV
, sélectionnez
Langue
.
et faites défiler le contenu afin de sélectionner
Sélection entrée
www.dell.com | support.dell.com
Le menu
vous avez branché votre téléviseur et votre équipement vidéo. Appuyez sur le bouton
d’entrée
également appuyer sur
Si vous utilisez la source d’entrée
Accédez au
de chaîne
source d’entrée
le connecteur
AV1 (COMPOSANT) — Sélectionnez AV1 lorsqu’un périphérique vidéo, tel qu’un lecteur de
DVD, un boîtier décodeur ou un récepteur réseau câblé, est raccordé aux connecteurs audio et
vidéo composants situés en dessous du téléviseur. Pour situer les connecteurs audio et vidéo
composants (
AV SIDE (COMPOSITE) —
système de jeux vidéo, est raccordé aux connecteurs audio et vidéo composites situés sur le côté
gauche du téléviseur. Pour situer les connecteurs audio et vidéo composites (
consultez la section
Sélection entrée
du panneau avant pour accéder directement au menu
Menu principal
. Si vous utilisez le connecteur
TV numérique
TV IN
AV1 IN
vous permet de sélectionner la source appropriée, selon la façon dont
Menu
et sélectionner
TV numérique
et sélectionnez
.
, consultez la section
), consultez la section
Sélectionnez Latéral AV lorsqu’un périphérique vidéo, tel qu’un
Vue du côté gauche
Sélection entrée
, vous pouvez prérégler les chaînes visibles.
Configur, Configuration des chaînes
TV IN
, vous devez prérégler les chaînes visibles pour la
VGA — Sélectionnez VGA lorsque votre
ordinateur est raccordé au connecteur
VGA
. Pour situer le connecteur
consultez la section
HDMI —
avez raccordé un périphérique, tel qu’un
lecteur de DVD, en utilisant le connecteur
HDMI
consultez la section
TV NUMÉRIQUE —
numérique lorsque votre antenne est
raccordée au connecteur
Vue d u bas
Vue du bas
page 70.
page 7.
page 71.
Source
Sélection entrée
dans le menu principal.
Sélectionnez HDMI lorsque vous
. Pour situer le connecteur
. Vous pouvez
, puis
Recherche
VGA
Vue du bas
Vue du bas
Sélectionnez TV
Video, Left, Right
TV IN
page 71.
HDMI
page 71.
. Pour situer
,
,
),
88Utilisation du menu TV
AV SIDE (S-VIDÉO)
magnétoscope, est raccordé aux connecteurs audio et S-Vidéo situés sur le côté gauche du
téléviseur. Pour situer les connecteurs audio et S-Vidéo (
section
AFFICHER ENTRÉES — Afficher entrées
Actif
apparaissent en blanc et les sources d’entrée non disponibles apparaissent en gris.
toutes les sources d’entrée et vous permet de sélectionner toutes les sources d’entrée même si vous
n’avez pas branché de périphérique.
Vue du côté gauche
recherche les connecteurs en cours d’utilisation. Les sources d’entrée disponibles
REMARQUE : Dans Param du Menu TV, qui se trouve dans le menu Configur, vous pouvez paramétrer
Sélection entrée afin d’afficher le périphérique que vous avez branché. Par exemple, AV1 (COMPOSANT)
indiquera DVD lorsque vous visualiserez le menu Sélection entrée.
—
Sélectionnez Latéral AV lorsqu’un périphérique vidéo, tel qu’un
S-Vidéo, Left, Right
page 70.
vous permet de sélectionner
), consultez la
Actif
et
To us
To us
. L’option
affiche
Paramètres d’image
Le menu
luminosité.
Paramètres d’image
vous permet de régler l’aspect de l’image, notamment la couleur et la
Si vous sélectionnez l’un des paramètres de
préréglage d’image suivants, les paramètres
individuels seront automatiquement mis à jour.
•Films
•Sport
•Signal faibl
•Multimédia
Si vous sélectionnez
régler les paramètres individuels, tels que la
Luminosité
Les
Temp. de couleur
suivantes :
•
Naturelle :
•
Normale :
•
Bleu :
•
Rouge :
et la
température d’origine du panneau
6 500 K
9 300° K
5 700° K
Personnel
Couleur
prédéfinies sont les
, vous pouvez
.
Utilisation du menu TV89
Paramètres audio
www.dell.com | support.dell.com
Le menu
vous regardez.
VOL. SORTIE TV
télécommande ou le bouton de contrôle du volume d’un récepteur audio branché. Sélectionnez
Va r i a bl e
avant du téléviseur.
récepteur audio branché.
Utilisez
piste sonore]).
Utilisez
désactiver le son provenant des haut-parleurs.
Paramètres audio
— Sélectionnez
si vous souhaitez régler le volume à l’aide de la télécommande ou des boutons du panneau
Programme
Silencieux
pour couper ou rétablir le son du téléviseur et
vous permet d’adapter au mieux le son selon le programme que
Mode minuit — Égalise les grandes variations
de volume existant entre les voix et les scènes
d’action.
Si vous sélectionnez l’un des paramètres de
Va r i a bl e
pour sélectionner
permet de régler le volume de la sortie TV, et non le volume d’un
préréglage
audio individuels seront automatiquement mis
à jour :
•Musique
•Théâtre
•Voix
Si vous sélectionnez
régler les niveaux audio individuels, tels que les ,
les
Basses
Fixe
si vous souhaitez régler le volume en utilisant la
Stéréo, Mono
, ou
Mode égaliseur
Personnel
et les
Aigus
.
SAP
(Second Audio Program [seconde
Orateur dehors
suivants, les niveaux
, vous pouvez
pour activer ou
90Utilisation du menu TV
PIP/PBP/POP
Vous pouvez visualiser deux sources actives simultanément en utilisant l’incrustation d’image
(
PIP
), la fonction POP (
Picture-Outside-Picture
) ou la fonction PBP (
Picture-By-Picture
La télécommande propose les options
PIP/PBP/POP
•Utilisez le bouton
POP/PBP
et désactiver les modes
•Si vous êtes en mode
PBP
suivantes :
PIP
ou le bouton
de la télécommande pour activer
PIP, POP
PIP, POP
, utilisez le bouton
SWAP
de la
télécommande pour permuter entre les
deux fenêtres.
•Utilisez le bouton
POS
de la télécommande
pour modifier la position de la fenêtre
à l’écran.
ou
et
).
PBP
PIP
.
Dans le
(horizontale) et la
menu TV
, vous pouvez régler la
Position V.
(verticale) des fenêtres
Transparence
, la
Taille
, ainsi que la
PIP
. Lorsque vous sélectionnez l’orientation
Position H.
horizontale, le bouton - déplace la fenêtre vers la gauche et le bouton + déplace la fenêtre vers la
droite. Lorsque vous réglez l’orientation verticale, 0 se trouve en haut de l’écran et 100 est en bas
de l’écran.
Compatibilité PIP/PBP/POP
En utilisant
qui apparaissent dans les fenêtres
Source
secondaire
PIP/PBP/POP
TV Numérique
AV1
(Composant)
AV SIDE
(Composite)
AV SIDE
(S-vidéo)
HDMI
VGA
, vous pouvez sélectionner la source d’entrée de votre choix parmi celles
PIP/PBP/POP
TV
Numérique
NonNonNonNonOuiOui
NonNonNonNonOuiOui
NonNonNonNonOuiOui
Non NonNonNonOui Oui
Oui OuiOuiOuiNonOui
Oui OuiOuiOuiOuiNon
.
Source principale
AV1AV SIDE
(Composite)
AV SIDE
(S-vidéo)
HDMIVGA
Utilisation du menu TV91
www.dell.com | support.dell.com
Taille
Taille
vous permet de régler l’aspect de l’image.
Utilisez les paramètres suivants pour régler le format de l’image :
Standard
16:9 ou 22:9.
Zoom
Format 4:3
Large
Plein écran
Décalage horizon
— Format idéal pour visualiser des films DVD au format HDTV numérique,
— Format idéal pour visualiser des films DVD 4:3, TV ou magnétoscope.
— Format idéal pour visualiser des films DVD 4:3, TV ou magnétoscope.
— Format idéal pour visualiser des films DVD au format HDTV numérique, 16:9 et 22:9.
— Format idéal pour visualiser des films DVD au format 16:9 ou HDTV numérique.
— Permet de régler la position horizontale de l’image.
REMARQUE :
selon le cas.
92Utilisation du menu TV
La plupart des DVD contiennent des informations sur le format d’image pris en charge
Contrôle parental
La fonction
enfants ne puissent pas voir des programmes qui ne sont pas recommandés pour leur âge.
Pour entrer dans le menu
que vous y entrez, utilisez le code d’accès
d’accès, consultez la section
Vous pouvez régler les fonctions suivantes afin de bloquer le contenu :
•
•
•
•
REMARQUE : Vous pouvez utiliser Effacer tout pour débloquer les chaînes et les émissions que vous
Contrôle parental
Contrôle de bloc —
Verr. des chaînes —
Classific film —
clasif).
Classification TV —
PG, 14, MA et Aucune classif).
aviez bloquées.
Bloque les films selon leur classification (G, PG, PG-13, R, NC-17, X et No
vous permet de bloquer certaines chaînes ou émissions afin que les
Contrôle parental
Création d’un
Active ou désactive tous vos paramètres de contrôle parental.
Bloque les chaînes sélectionnées.
Bloque les programmes TV selon leur classification (TV-Y, Y7, G,
, vous avez besoin d’un code d’accès. La première fois
3355
. Pour plus d’informations sur la création d’un code
code d’accès
page 93.
Création d’un code d’accès
Après avoir ouvert le menu
code d’accès numérique à quatre chiffres. Si pour quelque raison que ce soit vous perdez ou oubliez
votre code d’accès, vous pouvez utiliser le code d’accès par défaut.
1
Dans le menu
2
À l’aide du clavier numérique de la télécommande, entrez un nouveau code d’accès.
3
Sélectionnez
Quitter
Contrôle parental
Contrôle parental
.
une première fois, vous pouvez créer votre propre
, sélectionnez
Changer code
.
Utilisation du menu TV93
Configuration
www.dell.com | support.dell.com
Le menu
télévision par câble visibles, de modifier la langue du
de la langue du menu TV
chaînes visibles. Sélectionnez
à votre téléviseur.
Si vous utilisez la source d’entrée
Sélectionnez
chaînes, vous pouvez appuyer sur le bouton
l’opération. Sélectionnez
déformé, sélectionnez
Si vous utilisez le connecteur
d’entrée
Param minuteur
s’allumer et s’éteindre.
Sélectionnez
options de sous-titrage.
Configuration
Recherche de chaîne
Fine précision
TV numérique
vous permet de définir l’heure à laquelle le téléviseur doit automatiquement
Sous-titrage codé
vous permet de régler l’aspect du
page 88) et de rétablir les paramètres d’origine du constructeur.
Dans le menu
Durée affichage Menu TV
réduire la durée d’affichage du menu TV. La
valeur maximale est de 60 secondes.
Vous pouvez sélectionner
pour verrouiller les boutons du panneau
inférieur. Lorsque cette option est activée, seul le
bouton d’alimentation fonctionne. Maintenez les
boutons d’augmentation du volume et de chaîne
suivante enfoncés pendant 10 secondes pour
déverrouiller les boutons.
Config des chaînes
des chaînes individuelles et de prérégler les
Antenne/Câble
TV numérique
pour identifier les chaînes visibles. En cours de recherche des
Mod des chaînes
pour améliorer manuellement le réglage de la chaîne.
TV IN
, vous devez prérégler les chaînes visibles pour la source
.
pour activer ou désactiver les sous-titres et définir plusieurs autres
pour sélectionner l’antenne ou le cable connecté
, vous pouvez prérégler les chaînes visibles.
Menu
ou OK de la télécommande pour interrompre
pour modifier les chaînes. Si le signal est faible ou
menu TV
menu TV
, de prérégler les chaînes de
(consultez la section
Param du Menu TV
Verrouillage touches
vous permet de paramétrer
, utilisez
pour allonger ou
Sélection
94Utilisation du menu TV
Dépannage de votre téléviseur
PRÉCAUTION : Si vous voyez de la fumée ou des étincelles provenant de votre téléviseur,
contactez Dell. N’essayez en aucun cas de dépanner votre écran de téléviseur vous-même.
Conseils de dépannage
REMARQUE : Certains problèmes peuvent être liés à votre appareil. Consultez la documentation de tout
périphérique branché à votre téléviseur.
La plupart des problèmes de votre téléviseur peuvent être dus à un mauvais choix de la source
d’entrée. Chaque connecteur sur le côté gauche et en dessous du téléviseur est associé à une
sélection d’entrée qui porte la mention
•
AV1 (Composant)
•
AV SIDE (Composite)
•
AV SIDE (S-Vidéo)
Vous pouvez également sélectionner l’entrée suivante :
•
TV NUMÉRIQUE
•
VGA
— Connecteur VGA en dessous du téléviseur.
•
HDMI
— Connecteur HDMI en dessous du téléviseur.
— Connecteur composant en dessous du téléviseur.
— Connecteur composite sur le côté gauche du téléviseur.
— Connecteur S-Vidéo sur le côté gauche du téléviseur.
— Connecteur TV IN en dessous du téléviseur.
AV1
ou
AV SIDE
dans le menu
Sélection entrée
.
5
Dépannage de votre téléviseur95
www.dell.com | support.dell.com
Problèmes généraux
ProblèmeSolution possible
Mauvaise qualité d’image lorsque vous
regardez la télévision et que vous
utilisez un périphérique tel qu’un
lecteur de DVD ou un magnétoscope
1
Vérifiez les paramètres du format de l’image dans le menu TV.
Appuyez sur le bouton
d’informations sur l’utilisation du menu TV, reportez-vous à la
section « Utilisation du menu TV » page 87.
2
Branchez le périphérique en utilisant un connecteur différent.
Par exemple, si vous rencontrez un problème avec un
connecteur composite, essayez d’utiliser un connecteur
composant.
REMARQUE :
différent, vous avez besoin des câbles compatibles avec ce
connecteur. Consultez la documentation de votre périphérique
pour voir la liste des branchements possibles.
Après avoir branché le périphérique, modifiez la source d’entrée
dans le menu TV. Pour plus d’informations, reportez-vous à la
section « Sélection entrée » page 88.
3
Réinitialisez la configuration originale du constructeur.
Appuyez sur le bouton
puis sélectionnez
4
Réglez l’échelle des gris. Appuyez sur le bouton
sélectionnez
couleur
.
REMARQUE : Certains boîtiers décodeurs offrent une option
de format de l’image. Pour plus d’informations, consultez la
documentation qui accompagne votre périphérique.
Menu
et sélectionnez
Pour brancher un périphérique sur un connecteur
Menu
, sélectionnez
Réinitialisation d’usine
Param. d’image
, puis sélectionnez
Taille
Configur
.
. Pour plus
,
Menu
,
Temp. d e
96Dépannage de votre téléviseur
ProblèmeSolution possible
Mauvaise qualité d’image lors de
l’utilisation d’un périphérique branché
au connecteur TV IN (coaxial)
1
Assurez-vous que le connecteur TV est sélectionné comme
source d’entrée dans le menu
d’informations, reportez-vous à la section « Sélection entrée »
page 88.
2
Appuyez sur le bouton
sélectionnez
réinitialise les chaînes sur votre téléviseur.
3
Vérifiez les paramètres du format de l’image dans le menu TV.
Appuyez sur le bouton
d’informations sur l’utilisation du menu TV, reportez-vous à la
section « Utilisation du menu TV » page 87.
4
Réinitialisez la configuration originale du constructeur. Appuyez
sur le bouton
Réinitialisation d’usine
5
Réglez l’échelle des gris. Appuyez sur le bouton
sélectionnez
couleur
.
6
Le problème peut provenir de votre périphérique, contactez
votre fournisseur de services.
Rien n’apparaît sur l’écran de
mon téléviseur
1
Assurez-vous que le téléviseur est allumé.
2
Vérifiez que tous les câbles sont branchés correctement au
téléviseur, y compris le câble d’alimentation.
3
Vérifiez qu’une lumière bleue ou orange figure dans l’angle
inférieur droit du téléviseur. Une lumière bleue indique que le
téléviseur est allumé. Une lumière orange indique que le
téléviseur est en mode veille.
4
Assurez-vous que la bonne source est sélectionnée dans le menu
Sélection entrée
section « Sélection entrée » page 88.
5
Rebranchez tout périphérique qui est actuellement branché sur
le téléviseur. Si vous utilisez plusieurs périphériques, branchez
et testez un périphérique à la fois.
6
Branchez un autre périphérique dont vous savez qu’il
fonctionne correctement.
7
Réinitialisez la configuration originale du constructeur. Appuyez
sur le bouton
Réinitialisation d’usine
Sélection entrée
Menu
, sélectionnez
Configuration des chaînes
Menu
et sélectionnez
Menu
, sélectionnez
Configur
. Pour plus
Configur
. Cette action
Ta i l l e
. Pour plus
, puis sélectionnez
.
Menu
Param. d’image
, puis sélectionnez
Temp. d e
. Pour plus d’informations, reportez-vous à la
Menu
, sélectionnez
Configur
, puis sélectionnez
.
, puis
,
Dépannage de votre téléviseur97
www.dell.com | support.dell.com
ProblèmeSolution possible
Pas de son1
Assurez-vous que la fonction Silencieux n’est pas activée.
Appuyez sur le bouton
pour activer et désactiver cette fonction.
2
Si quelques chaînes seulement n’émettent pas de son, vous
devez corriger le menu
(reportez-vous à la section « Sélection entrée » page 88).
3
Vérifiez que les câbles audio sont solidement branchés sur les
connecteurs d’entrée audio de votre téléviseur et sur les
connecteurs de sortie audio de vos périphériques. Assurez-vous
que les couleurs des câbles correspondent aux couleurs des
connecteurs.
4
Assurez-vous également que les câbles audio sont branchés sur
la même rangée que les câbles vidéo. Reportez-vous à la section
« À propos de votre téléviseur » page 69 pour visualiser
l’emplacement des connecteurs.
5
Branchez le périphérique en utilisant un connecteur différent.
Par exemple, si vous rencontrez un problème avec un
connecteur composite, essayez d’utiliser un connecteur
composant.
REMARQUE :
différent, vous avez besoin des câbles compatibles avec ce
connecteur. Consultez la documentation de votre périphérique
pour voir la liste des branchements possibles.
Après avoir branché le périphérique, modifiez la source d’entrée
dans le menu TV. Pour plus d’informations, reportez-vous à la
section « Sélection entrée » page 88.
6
Testez le périphérique sur un téléviseur différent.
7
Si vous utilisez les fonctions
sélectionné la
Menu
et sélectionnez
Image double ou pas d’image avec
le DVD
L’image est trop faible ou trop brillante
Éteignez le balayage progressif sur le lecteur de DVD.
Votre téléviseur Dell™ offre un deinterlacer intégré de qualité
équivalente, voire meilleure, que celui de votre lecteur de DVD.
Pour plus d’informations sur le balayage progressif de votre
lecteur de DVD, consultez la documentation de votre lecteur
de DVD.
Mettez les paramètres de couleur à jour dans le menu TV. Appuyez
sur le bouton
Menu
Mute (Silencieux)
Sélection entrée
de la télécommande
du menu TV
Pour brancher un périphérique sur un connecteur
Source audio
PIP/PBP/POP
et sélectionnez
PIP/PBP/POP
appropriée. Appuyez sur le bouton
Param. d’image
, assurez-vous d’avoir
.
.
98Dépannage de votre téléviseur
ProblèmeSolution possible
L’écran n’est pas centré correctement1
Mettez les paramètres de taille à jour dans le menu TV. Appuyez
sur le bouton
2
Réinitialisez la configuration originale du constructeur. Appuyez
sur le bouton
Réinitialisation d’usine
Il y a une ou plusieurs lignes sur l’écran1
Vérifiez les paramètres du format de l’image dans le menu TV.
Appuyez sur le bouton
d’informations sur l’utilisation du menu TV, reportez-vous à la
section « Utilisation du menu TV » page 87.
2
Assurez-vous que la bonne source est sélectionnée dans le menu
Sélection entrée
section « Sélection entrée » page 88.
3
Essayez de brancher un périphérique différent. Assurez-vous
d’avoir correctement branché les câbles et mis à jour la source
d’entrée dans le menu TV.
4
Mettez les paramètres de taille à jour dans le menu TV. Appuyez
sur le bouton
5
Réinitialisez la configuration originale du constructeur. Appuyez
sur le bouton
Réinitialisation d’usine
Les boutons du panneau avant
ne fonctionnent pas
Vérifiez dans le
Appuyez sur le bouton Menu et sélectionnez
Utilisez les boutons du panneau avant pour déverrouiller le
et les boutons du panneau avant :
TV
1
Appuyez sur le bouton
Un message s’affiche, indiquant que le menu TV et les boutons
sont verrouillés.
2
Lorsque le message est affiché à l’écran, appuyez
simultanément sur les boutons d’augmentation du volume et
de chaîne suivante du panneau
Un message s’affiche, indiquant que le menu TV et les boutons
sont déverrouillés.
L’image est trop petite1
Réglez les paramètres de taille. Appuyez sur le bouton
et sélectionnez
2
Il peut s’agir d’un problème provenant de votre périphérique.
Consultez la documentation de votre périphérique.
Menu
et sélectionnez
Menu
, sélectionnez
Ta i l l e
Configur
.
, puis sélectionnez
.
Menu
et sélectionnez
Ta i l l e
. Pour plus
. Pour plus d’informations, reportez-vous à la
Menu
et sélectionnez
Menu
, sélectionnez
Ta i l l e
Configur
.
, puis sélectionnez
.
menu TV
si les boutons ont été verrouillés.
Menu
.
avant
pendant 3 secondes.
Taille
.
Configur
.
menu
Menu
Dépannage de votre téléviseur99
www.dell.com | support.dell.com
Messages du menu TV
Lors de l’utilisation de votre téléviseur, les messages suivants peuvent apparaître.
MessageSolution possible
Réglage autoAucune action requise, le téléviseur opère un réglage
automatique.
Hors plageVérifiez les paramètres de résolution optimum.
Vous pouvez avoir besoin de télécharger un nouveau pilote vidéo.
Pour plus d’informations, allez sur support.dell.com.
Aucune entrée vidéo1
Touches TV verrouilléesPour le déverrouiller, appuyez sur le bouton Menu et
Test autoApparaît pour la source d’ordinateur lorsque rien n’est connecté.
Vérifiez que tous les câbles sont branchés correctement.
2
Assurez-vous que la bonne source est sélectionnée dans le menu
Sélection entrée
section « Sélection entrée » page 88.
sélectionnez Configur.
Utilisez les boutons du panneau avant pour déverrouiller le
TV
et les boutons du panneau avant :
1
Appuyez sur le bouton
Un message s’affiche, indiquant que le menu TV et les boutons
sont verrouillés.
2
Lorsque le message est affiché à l’écran, appuyez
simultanément sur les boutons d’augmentation du volume et
de chaîne suivante du panneau avant pendant 10 secondes.
Un message s’affiche, indiquant que le menu TV et les boutons
sont déverrouillés.
Sélectionnez VGA dans le menu Sélection entrée, puis branchez
un ordinateur au connecteur VGA.
. Pour plus d’informations, reportez-vous à la
menu
Menu
.
100Dépannage de votre téléviseur
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.