Dell W2607C User Manual

Image Settings for PC Connectivity

IMAGE SETTINGS

BACK

AUTO ADJUST

PHASE

PIXEL CLOCK

COLOR SETTINGS

Fig. 1

YES NO

SIZE& POSITION

IMAGE SETTINGS

SIZE AND POSITION

H.POSITION

V.POSITION

FULL ASPECT RATIO

FULL SCREEN

1:1

Fig. 2

COLOR SETTINGS

SIZE& POSITION

IMAGE SETTINGS

In case VGA/DVI inputs default settings do not provide satisfactory image, refer to the following for additional information on image adjustment features.

Auto Adjust - Allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, with VGA input, you can further tune your monitor by using the Pixel Clock (Coarse) and Phase (Fine) controls under Image Settings. menu, see Fig. 1.

Phase - Use the VOL - and VOL + buttons to make adjustments. (Minimum: 0 ~ Maximum: 63)

Pixel Clock - Use the VOL - and VOL + buttons to make adjustments. (Minimum: 0 ~ Maximum: 100)

If satisfactory results are not obtained using the Phase adjustment, use Pixel Clock (Coarse) and then use Phase (fine), again.

NOTE: Pixel Clock (Coarse) may change the width of the display image.

Use the H.Position/V.Position of the Size & Position menu to center the display image on the screen, see Fig. 2.

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaim s any proprietary interest in trademarks and trade names other than its own.

Réglage audio

+ 2 hidden pages