Statement of Volatility – Dell P2719HC
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
List of Non-Volatile Components on System Board
User
Accessible
for external
data
Remedial Action (Action
necessary to prevent loss of
data)
CAUTION: All other components on the system board lose data if power is removed from the system. Primary
power loss (unplugging the power cord) destroys all user data.
The Dell P2719HC contains both volatile and non-volatile (NV) components. Volatile components lose their
data immediately after power is removed from the component. Non-volatile (NV) components continue to
retain their data even after power is removed from the component. The following NV components are
present on the Dell P2719HC system board.
Table 1.
Serial Flash
ROM
MX25L160
6EM2I
EEPROM
M24C32
EEPROM
M24C02
Serial Flash
ROM
MX25L8006
EM1I
EEPROM
M24C16
U302 Non-volatile Flash
memory, 16M bit. To
store Scaler IC firmware.
U303 Non-volatile
EEPROM
bit. To store HDCP and
user adjust data.
U1201
Non-volatile EEPROM 2Kbit.
To store HDMI EDID data.
U1303 Non-volatile Flash
memory, 8M bit. To store
PD controller firmware.
U1902
Non-volatile
EEPROM
bit. To store USB Hub IC
firmware.
32K
16K
No Part placed on Interface
Board. It is
hardware/software write
protected.
No Part placed on Interface
Board. It is
hardware/software write
No
Part placed on Interface
Board. It is
hardware/software write
No Part placed on Interface
Board. It is
hardware/software write
protected.
No Part placed on Interface
Board. It is
hardware/software write
protected.
________________
© 2018 Dell Inc.
July 2018 A00