Dell OptiPlex FX160 User Manual

Migrating to 2 GB Microsoft Windows XP Embedded Image on Dell OptiPlex FX-160 Systems

Overview

This document contains information about migrating to a 2 GB Microsoft Windows XP Embedded (Windows XPE) image on Dell OptiPlex FX-160 systems. You can select one of the following options:
Upgrade the Virtual Remote Desktop (VRD) clients with the existing A04 image and a 1 GB module. See:
"Upgrading to VMware View 4.5 Client Using the Existing Image" on
page 2.
"Upgrading to Citrix 12.03 Client Using the Existing Image" on page 3.
Upgrade Windows XPE to an A05 image with a 1 GB module. See:
The whitepaper at
content.dell.com/us/en/enterprise/d/business~solutions~whitepapers~ en/Documents~OptiPlex-fx160-imaging-guide.pdf.aspx
"Capacity Guidelines for Windows XPE Languages" on page 3.
"Installing the Latest Image With a 1 GB Module" on page 4.
Upgrade Windows XPE to an A05 image with a 2 GB module. See
content.dell.com/us/en/enterprise/d/business~solutions~whitepapers~en /Documents~OptiPlex-fx160-imaging-guide.pdf.aspx
.
December 2010

Upgrading to VMware View 4.5 Client Using the Existing Image

NOTE: If you purchased a Windows XPE image prior to November 2010, you
can upgrade to View 4.5 client.
To upgrade to VMware View 4.5 client using the existing image:
1
Log onto the Windows XPE system using the following
User name: Admin1 Password: dell
2
Click
Start
3
Uninstall the older version of
4
Connect to the VMWare View 4.5 connection server url that is configured in your VMWare View setup environment using the browser.
You are prompted to download View 4.5 client. See Figure 1.
Figure 1. VMware View Portal 4.5
Control PanelAdd/Remove Programs
VMware View Client
.
.
credentials
:
5
Download and install the client on the Windows XPE image.

Upgrading to Citrix 12.03 Client Using the Existing Image

To upgrade to Citrix:
1
Log onto the Windows XPE system using the following
User name: Admin1
credentials
:
Password: dell
Click
2
3
4
5
Start
Uninstall the older version of
Go to
myCitrix.com
Install the latest client on the Windows XPE admin machine.
Control PanelAdd/Remove Programs
Citrix online plug-in
.
.
and download the Citrix-Full-Online Plugin version 12.03.

Capacity Guidelines for Windows XPE Languages

Languages such as English, French, Spanish, Dutch, Swedish, Italian, and German, do not require Japanese, Korean, Traditional Chinese, and Simplified Chinese require a 2 GB module because the total size for imaging exceeds 1 GB. See Table 1 for more information.
Table 1. Guidelines for Windows XPE Languages
Tota l siz e f or imaging without wireless driver
Tota l siz e w it h wireless driver
*ENG—English, FRN—French, SPA—Spanish, DUT—Dutch, SWE—Swedish, ITN—Italian, GER—German, KOR—Korean, JPN—Japanese, CHT—Traditional Chinese, and CHS—Simplified Chinese
NOTE: All the values in the table are in MB. The actual size of a 1 GB module varies
according to the module. The approximate size of a 1 GB module is 975 MB and a 2 GB module is 1930 MB.
NOTE: Any configuration with a wireless module would require a 2 GB module.
a 2 GB module because the total size for imaging is less than 1 GB.
Language*
ENG FRN SPA DUT SWE ITN GER KOR JPN CHT CHS
974 957 958 957 956 958 961 976 1003 1014 1079
1069 1040 1040 1041 1039 1039 1033 1054 1095 1115 1156

Installing the Latest Image With a 1 GB Module

NOTE: It is recommended that you follow these steps only if you have to upgrade the
Windows XPE image to A05.
To install the latest image using a 1 GB module:
1
Install the latest Windows XPE image on an OptiPlex FX-160 system with a 2 GB module.
2
Uncompress the disk-image:
a
Navigate to
b
Right-click
c
Select the
d
Clear the option
3
Remove any software that is not required in your client environment. Click
Start
The following software can be uninstalled if they are not used in your client environment:
Citrix Online-Plugin Receiver (frees up 20 MB of space)
VMware View client (frees up 40 MB of space)
Citrix Online-Plugin from
Symantec end-point protection software
4
Delete temporary files and folders.
5
Check the total occupied space.
The total occupied space should be around 920 MB and should be less than the
Control Panel
total size for imaging
My Computer
C:
and select
General
tab.
Compress drive to save disk space
Properties
Add/Remove Programs
C:\Dell folder
in Table 1.
.
.
.
6 Capture the image and redeploy it to other systems with a 1 GB module.
See the Re-Imaging Guide at
content.dell.com/us/en/enterprise/d/business~solutions~whitepapers~en /Documents~OptiPlex-fx160-imaging-guide.pdf.aspx.
Alternatively, you can upload the new image to the Altiris deployment server. The new image can be redeployed from the Altiris server to the existing OptiPlex FX-160 Windows XPE images with a 1 GB module.
____________________
Information in this publication is subject to change without notice. © 2010 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell™, the DELL logo, and OptiPlex™ are trademarks of Dell Inc. Microsoft and Windows countries. Citrix countries. VMware View™ and VMware the United States or other countries.
Other trademarks and trade names may be used in this publication to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
®
are registered trademarks of Microsoft Corporation in the United States and/or other
®
is a registered trademark of Citrix Systems, Inc. in the United States and/or other
®
are trademarks or registered trademarks of VMWare, Inc. in
®
Loading...