7 Front USB3.0 Connector (Front _USB ) 17 CPU Fan Connector (FAN_CPU)
8 SATA 2 Connector (SATA2) 18 Power Switch Connector (PWR_SW)
9 SATA 1 Connector (SATA1) 19 Memory Connectors (DIMM1, DIMM2,
DIMM3, DIMM4)
10 SATA 0 Connector (SATA0)
8
Page 9
DELL™ OPTIPLEX™ 7010 TECHNICAL GUIDEBOOK VER1.2
ULTRA SMALL FORM FACTOR COMPUTER (USFF) VIEW
FRONT VIEW
1 Optical Drive 5 Headphone Connector
2 Optical Drive Eject
6 Microphone Connector
Button
3 Power Button, Power
Light
7 USB 3.0 Connectors (2)
4 Drive Activity Light
BACK VIEW
Wi-Fi Antenna
8
(optional)
9 Network Activity Light 16
10 Captive Thumbscrew 17
Line-in/ Microphone
15
Connector
VGA Connector
DisplayPort Connector
(2)
11 Padlock Ring 18 Serial Connector
Kensington / Noble
12
Security Cable Slot
13 Power Connector 20
USB 3.0 Connectors
19
(2)
USB 2.0 Connectors
(2)
14 Line-Out Connector 21 Network Connector
22 Link Integrity Light
9
Page 10
DELL™ OPTIPLEX™ 7010 TECHNICAL GUIDEBOOK VER1.2
USFF System Board Components
Number Name Number Name
1 Front Panel Connector (FRONTPANEL) 9
2 Memory Connector (DIMM_1,DIMM_2) 10 SATA 1 Connector (SATA1)
3 CPU Fan Connector (FAN_CPU) 11 P1 Power Connector (POWER)
4 Internal Speaker Connector (INT_SPKR) 12 SATA 0 Connector (SATA0)
5 Front IO Connector (F_USB_AUDIO) 13
6 System Fan Connector (FAN_HDD) 14 LPC Debug Connector (LPC_DEBUG)
7 Mini-PCI Socket (PCIE_MINICARD) 15 P2 Power Connector (12V_PWRCONN)
8 Front USB3.0 connector (Front USB) 16 Processor socket (N/A)
17 Battery Connector (BATTERY)
HDD-ODD Power Connector
(HDD_ODD_POWER)
Intrusion Switch Connector
(INTRUDER)
10
Page 11
DELL™ OPTIPLEX™ 7010 TECHNICAL GUIDEBOOK VER1.2
MARKETING SYSTEM CONFIGURATIONS
NOTE: O erings may vary by country. For more information regarding the confi guration of your computer, click
Start>Help and Support and select the option to view information about your computer.
OPERATING SYSTEM
Windows Operating System
Other
OS Media Support Optional
MTDTSFFUSFF
Microsoft® Windows 7® Home Basic SP1 (32 and 64 bit),
Microsoft® Windows 7® Home Premium SP1 (32 and 64 bit),
Microsoft® Windows 7® Home Premium w/MUI SP1 (32 and 64 bit),
Microsoft® Windows 7® Professional w/MUI SP1 (32 and 64 bit),
Microsoft® Windows 7® Professional SP1 (32 and 64 bit),
Microsoft® Windows 7® Ultimate SPI (32 and 64 bit),
TPM 1.2 Security Device (Trusted Platform Module)1 4KB located at TPM1.2 on chipset
Non-TPM Available in select countries
NIC EEPROM
64Mbit (8MB) &32Mbit(4MB) located at SPI_FLASH on chipset
LOM configuration contained within SPI_FLASH – no dedicated
LOM EEPROM
11
Page 12
DELL™ OPTIPLEX™ 7010 TECHNICAL GUIDEBOOK VER1.2
PROCESSOR
1
NOTE: Global Standard Products (GSP) are a subset of Dell’s relationship products that are managed for availability and synchronized transitions on a worldwide basis. They ensure the same platform is available for purchase globally. This allows customers to
reduce the number of configurations managed on a worldwide basis, thereby reducing their costs. They also enable companies
to implement global IT standards by locking in specific product configurations worldwide. The following GSP processors identified below will be made available to Dell customers.
NOTE: Processor numbers are not a measure of performance. Processor availability subject to change and may vary by region/
3rd generation CPUs natively support 3 displays with the integrated CPU graphics. 2 of the displays must be DP and connected to onboard DP
through DP cables, the other could be any other format. One of the DP port has a maximum resolution of 2500x1600 at 60Hz refresh rate and
the other DP and VGA port have max resolutions of 1920x1200 at 60Hz refresh rates. Active dongles must be used to connect non DP displays to
the 2 onboard DP ports.
2
Post launch CPU, available from June for G860, G540; July for G640, i5 3470/S, i5 3570/S, i5 3475S; September for i3 3220, i3 3225, i3 3240.
3
Available at launch, will be replaced in July or September, i5 3470/S replace i5 3450/S; i5 3570/S replace i5 3550/S; i3 3220 replace i3 2120; i3
NOTE: Memory modules should be installed in pairs of matched memory size, speed, and technology. If the memory modules
are not installed in matched pairs, the computer will continue to operate, but with a slight reduction in performance. The entire
16GB memory range is available to 64-bit operating systems.
Type: DDR3 Synch DRAM Non-ECC Memory 1600MHz
MTDTSFFUSFF
2
DIMM Slots 4 4 4 2
DIMM Capacities Up to 8GB Up to 8GB Up to 8GB Up to 8GB
Minimum Memory 2GB 2GB 2GB 2GB
1
Maximum System Memory 16GB
16GB1 16GB1 16GB1
Memory configurations
1
16GB
DDR3, 1600MHz2, (4 x 4GB) X X X
16GB1 DDR3, 1600MHz2, (2 x 8GB) X
1
8GB
DDR3, 1600 MHz2, (2 x 4GB) X X X X
6GB1 DDR3, 1600MHz2, ( 2GB + 4GB) X X X X
1
DDR3, 1600 MHz2, (2 x 2GB) X X X X
4GB
1
DDR3, 1600MHz2, (1 DIMM) X X X X
4GB
2GB DDR3, 1600MHz2, (1 DIMM) X X X X
1
To fully utilize 4GB or more of memory requires a 64-bit enabled processor and 64-bit operating system. With 32-bit OS, the total amount of
available memory will be less than 4GB. The amount less depends on the actual system configuration.
2
1600MHz memory will only perform as 1600MHz memory when 3rd generation CPUs are used. It will perform as 1333MHz memory if 2nd
generation i3 2130, i3 2125, i3 2120, G860, G850 CPUs are installed in the system. It will perform as 1066MHz memory if 2nd generation G640,
G630, G540, G530, G460 CPUs are installed in the system.
13
Page 14
DELL™ OPTIPLEX™ 7010 TECHNICAL GUIDEBOOK VER1.2
DRIVES AND REMOVABLE STORAGE
MT DT SFF USFF
Bays:
5.25-inch Optical Bay Supported (External) 2 1 1 1
Dell USB Entry Keyboard with optional palmrest Optional
Dell Multimedia Pro Keyboard Optional
Dell Smart Card Keyboard Optional
Dell USB Optical Mouse Optional
Dell Laser Mouse Optional
MTDTSFFUSFF
17
Page 18
DELL™ OPTIPLEX™ 7010 TECHNICAL GUIDEBOOK VER1.2
SECURITY
Trusted Platform Module (TPM) 1.21 Integrated on system board
Chassis Intrusion Switch Optional
Dell Smartcard Keyboard Optional
Chassis lock slot and loop support Standard
Dell Data Protection | Hardware Encryption Engine Optional
1
TPM is not available in all countries. Depending on your country regulations, no-TPM system boards may be available.
MT DT SFF USFF
SOFTWARE
Dell Client Manager Available via Dell.com
Dell Data Protection | Access (DDPA) Standard
Dell Data Protection | Encryption (DDPE) Optional
MT DT SFF USFF
ENVIRONMENTAL
NOTE: For more details on Dell Environmental features, please to go to Environmental Attributes section. See
your specifi c region for availability.
Sustainable packaging X X X
MultiPack packaging Optional, US only
Energy Ecient Power Supply Optional Standard
MT DT SFF USFF
ALL-IN-ONE STANDS AND MOUNTS
Small Form Factor AIO Stand
Ultra Small Form Factor AIO Stand
Ultra Small Form Factor Wall Mount / Desk Mount
MTDTSFFUSFF
Optional
Optional
Optional
SERVICE AND SUPPORT
NOTE: For more details on Dell Service Plans please to go to: www.dell.com/service/service_plans
3 Year Warranty1 Next Business Day On-site2 (3-3-3) Standard
ProSupport Optional
1
For a copy of our guarantees or limited warranties, please write Dell USA L.P., Attn: Warranties, One Dell Way, Round Rock, TX 78682. For more
information, visit www.dell.com/warranty.
2
Service may be provided by third-party. Technician will be dispatched if necessary following phone-based troubleshooting. Subject to parts
availability, geographical restrictions and terms of service contract. Service timing dependent upon time of day call placed to Dell. U.S. only.
MTDTSFFUSFF
18
Page 19
DELL™ OPTIPLEX™ 7010 TECHNICAL GUIDEBOOK VER1.2
DETAILED ENGINEERING SPECIFICATIONS
SYSTEM DIMENSIONS (PHYSICAL)
NOTE: System Weight and Shipping Weight is based on a typical confi guration and may vary based on PC
confi guration. A typical confi guration includes: integrated graphics, one hard drive, one optical drive.
SYSTEM LEVEL ENVIRONMENTAL AND OPERATING CONDITIONS
Temperature
Operating 10°C to 35°C (50°F to 95°F)
Non-Operating (Storage) -40°C to 65°C (-40°F to 149°F)
Relative Humidity 20% to 80% (non-condensing)
Maximum vibration
Operating 0.25 G at 3 to 200 Hz at 0.5 octave/min
Non-Operating 0.5 G at 3 to 200 Hz at 1 octave/min
Maximum Shock
Operating
Non-Operating
Maximum Altitude
Operating –15.2 to 3048 m (–50 to 10,000 ft)
Non-Operating –15.2 to 10,668 m (–50 to 35,000 ft)
MTDTSFFUSFF
Bottom half-sine pulse with a change in velocity
of 50.8 cm/sec (20 inches/sec)
27-G faired square wave with a velocity change
of 508 cm/sec (200 inches/sec)
20
Page 21
DELL™ OPTIPLEX™ 7010 TECHNICAL GUIDEBOOK VER1.2
POWER
NOTE: These form factors utilize a more e cient Active Power Factor Correction (APFC) power supply. Dell
recommends only Universal Power Supplies (UPS) based on Sine Wave output for APFC PSUs, not an approximation of a Sine Wave, Square Wave, or quasi-Square Wave. If you have questions, please contact the manufac-
NOTE: These form factors utilize a more ecient Active Power Factor Correction (APFC) power supply. Dell recommends only Uninterruptible Power Supplies (UPS) based on Sine Wave output for APFC
PSUs, not an approximation of a Sine Wave, Square Wave, or quasi-Square Wave. If you have ques-
tions, please contact the manufacture to confirm the output type.
3.0v CMOS battery (Type and estimated battery life)
Brand Type Voltage Composition Life
PANASONIC CR-2032L/
BE
MITSUBISHI CR2032 3V Lithium Continuous Discharge Under 15 kΩ Load to 2.0V End-
3V Lithium Continuous Discharge Under 15 kΩ Load to 2.5V End-
Voltage.
20°C ±2°C: 1183Hrs. or Longer, 1133Hrs.or Longer after 12
months.
Voltage.
20°C±2°C: 1000Hrs. or Longer, 970Hrs.or Longer after 12
months.
0°C±2°C: 910Hrs. or Longer, 890Hrs.or Longer after 12
months.
22
Page 23
DELL™ OPTIPLEX™ 7010 TECHNICAL GUIDEBOOK VER1.2
AUDIO
INTEGRATED REALTEK ALC269Q HIGH DEFINITION AUDIO
High Definition Stereo support X X X X
Number of channels 2
Number of Bits / Audio resolution 16, 20, and 24-bit resolution
Sampling rate (recording/playback) Support 44.1K/48K/96K/192 kHz sample rates
Signal to Noise Ratio 98 dB DAC outputs, 90 dB for ADC inputs
Analog Audio X X X X
Dolby Digital
THX
Digital out (S/PDIF)
Audio Jack Impedance
Microphone 40K ohm~60K ohm
Line-In 40K ohm~60K ohm
Line-Out 100~150 ohm
Headphone 1~4 ohm
Internal Speaker Power Rating 2Watt (peak) / 1Watt (average)
MT DT SFF USFF
COMMUNICATIONS - INTEGRATED LAN
INTEGRATED INTEL® 82579 GIGABIT1
ETHERNET LAN 10/100/1000
External Connector Type RJ45
Data Rates supported 10/100/1000 Mbps
Controller Details
Controller bus architecture
Integrated memory N/A
Data transfer mode (example Bus-Master DMA) N/A
Power consumption (full operation per data rate connection speed) 711mW (Max.)
Power consumption (standby operation) 227mW (Max.)
For hard drives, GB means 1 billion bytes ; actual capacity varies with preloaded material and operating environment and will be less.
38
Page 39
DELL™ OPTIPLEX™ 7010 TECHNICAL GUIDEBOOK VER1.2
OPTICAL DRIVES
DVD +/- RW1
External Dimensions
inches/centimeters
(Without Bezel – W x H x
D)
Weight (max) pounds/
kilograms
Interface type and speed SATA 1.5Gbit/sSATA 1.5Gbit/sSATA 1.5Gbit/sSATA 1.5Gbit/s
Disc Capacity StandardStandardStandardStandard
Internal buer size supplier dependentsupplier dependentsupplier dependentsupplier dependent
Access Times (typical) supplier dependentsupplier dependentsupplier dependentsupplier dependent
Maximum Data Transfer Rates
Writes16x DVD/48x CD16x DVD/48x CD8x DVD/ 24x CD8x DVD / 24x CD
Reads16x DVD/48x CD16x DVD/48x CD8x DVD/ 24x CD8x DVD/ 24x CDPower Source
DC Power Requirements12V, 5V12V, 5V5V5V
Relative Humidity Range5% to 95% RH5% to 95% RH5% to 95% RH5% to 95% RH
Maximum Wet Bulb Temperature
1200mA (12V)/ 900mA
MTDTSFFUSFF
(5V)
5°C to 50°C5°C to 50°C5°C to 50°C5°C to 50°C
29°C29°C29°C29°C
-40°C to 65°C-40°C to 65°C-40°C to 65°C-40°C to 65°C
38°C38°C38°C38°C
1200mA (12V)/ 900mA
(5V)
800mA800mA
Altitude Range-200 to 10600m-200 to 10600m-200 to 10600m-200 to 10600m
40
Page 41
DELL™ OPTIPLEX™ 7010 TECHNICAL GUIDEBOOK VER1.2
MEDIA CARD READER (MCR)
NOTE: Dell 19 in 1 Media Card Reader (MCR) is supported via a F5 to F3 bay converter on the MT and DT and may require a slim
line optical drive depending on selectable configuration. MCR is not available on the SFF and USFF chassis.
19 IN 1 MEDIA CARD READER
External Dimensions inches/(centimeters)
(With Bezel – W x H)
Weight (max) pounds/kilograms ~155g
Interface type and speed USB 2.0, 480Mb/s
Media Supported ( maximum capacity supported will vary by Flash Media Types)
Media Supported
Support Specification Versions:
Power Source
Max Power Requirements2.5W
Supply Voltage Range4.75V ~ 5.25V
Power Consumption: Standby less than 0.5mA @ 5.0VDC
Environmental Operating Conditions (Non-Condensing):
Multiple Core Support: All
Intel® SpeedStep™: Enable
C States Control: Enable
Intel TurboBoost Enable
HyperThread control: Enable
HDD Protection Support Enable (For China market only)
CPU XD Support: Enable
AC Recovery: Power O
Auto On Time: Disable
Deep Sleep Control: Disable
Fan Control Override: Disable
USB Wake Support Disable
Wake on LAN/WLAN: Disable
Block sleep Disable
Numlock LED: Enable
Keyboard Errors: Enable
POST HotKeys: Enable
Virtualization: Enable
VT for Direct I/O: Enable
Trusted Direct I/O Disable
Service Tag: Set by the factory
Asset Tag: Optional User Entry
Dual USB Ports, Rear Quad USB Ports)
Disable (For system with Chassis Intrusion
detection)
42
Page 43
DELL™ OPTIPLEX™ 7010 TECHNICAL GUIDEBOOK VER1.2
CHASSIS ENCLOSURE & VENTILATION REQUIREMENTS
ENCLOSURE VENTILATION
If your enclosure has doors, they need to be of a type that allows at least 30% airflow
through the enclosure (front and back).
ENCLOSURE MINIMUM CLEARANCE
Leave a 10.2 cm (4 in.) minimum clearance on all vented sides of the computer to permit
the airflow required for proper ventilation.
RECOMMENDED ENCLOSURE
Do not install your computer in an enclosure that does not allow airflow. This restricts the
airflow and impacts your computer’s performance, possibly causing it to overheat.
OPEN DESK MINIMUM CLEARANCE
If your computer is installed in a corner, on a desk, or under a desk, leave at least 5.1 cm (2 in.)
clearance from the back of the computer to the wall to permit the airflow required for proper
ventilation.
REGULATORY COMPLIANCE AND ENVIRONMENTAL
Product related conformity assessment and regulatory authorizations including Product Safety, Electromagnetic Compatibility
(EMC), Ergonomics, and Communication Devices relevant to this product may be viewed at www.dell.com/
regulatory_compliance. The Regulatory Datasheet for this product is located athttp://www.dell.com/regulatory_compliance.
Details of Dell's environmental stewardship program to conserve product energy consumption, reduce or eliminate materials for
disposal, prolong product life span and provide eective and convenient equipment recovery solutions may be viewed at
www.dell.com/environment. Product related conformity assessment, regulatory authorizations, and information encompassing
Environmental, Energy Consumption, Noise Emissions, Product Materials Information, Packaging, Batteries, and Recycling relevant
to this product may be viewed by clicking the Design for Environment link on the webpage.
43
Page 44
DELL™ OPTIPLEX™ 7010 TECHNICAL GUIDEBOOK VER1.2
ACOUSTIC NOISE EMISSION INFORMATION
OPTIPLEX 7010 MT
Component
CPU
Memory
HDD (#, capacity)
RMSD
Graphics Adapter
The Declared Noise Emission in accordance with ISO 9296 for the Dell OptiPlex 7010 MT is as follows:
(all values L
Operating Mode
Idle
HDD Operating
90% CPU
ODD Operating
expressed in bels; 1 bel=10 decibels, re 10
WAd
Typical Configuration
Declared Sound Power (L
Typical Configuration High-end Configuration
Ivy Bridge i5 3470 Ivy Bridge i5 3770
4G DDR3 1600MHz 8G DDR3 1600MHz(x2)
500G 7200RPM SATA3 1T 7200RPM SATA3(x2)
16X DVD+/-RW SATA HH 16X DVD+/-RW SATA HH
Intel® HD Graphics Family ATI Radeon HD7570
-12
Watts)
High-end Configuration
)
Declared Sound Power (L
WAd
WAd
)
4.0 4.3
4.0 4.4
4.0 4.8
5.2 5.2
The Declared A-weighted Sound Pressure Level in decibels (re 2x10-5 Pa), at Operator, Bystander, and Desk Side Positions are
measured in accordance with ISO 7779 7.6.1, 7.6.2, and C.15.2 and declared in accordanc e with ISO 9296 for this product is as
follows1:
Operating Mode
Typical Configuration Declared Sound Pressure
(LpA)
High-end Configuration Declared Sound Pressure
(LpA)
Idle
HDD Operating
90% CPU
ODD Operating
1
All tests are conducted according to ISO 7779 and declared according to ISO 9296 except 90% CPU. For this mode, the system CPU was stressed
at 90% utilization with no other peripheral device actively seeking. This test mode is not specified in ISO 7779, but was measured using the same
microphone distances and measurement techniques defined for the other reported operating modes.
2
Declared Sound Power rounded to nearest tenth of a bel per ISO 9296 section 4.4.2
The Declared Noise Emission in accordance with ISO 9296 for the Dell OptiPlex 7010 DT is as follows:
(all values L
expressed in bels; 1 bel=10 decibels, re 10
WAd
Operating Mode
Idle
HDD Operating
90% CPU
ODD Operating
Typical Configuration High-end Configuration
Ivy Bridge i5 3470 Ivy Bridge i5 3770
4G DDR3 1600MHz 8G DDR3 1600MHz(x2)
500G 7200RPM SATA3 1T 7200RPM SATA3
16X DVD+/-RW SATA HH 16X DVD+/-RW SATA HH
Intel® HD Graphics Family ATI Radeon HD7570
-12
Watts)
Typical Configuration
Declared Sound Power (L
WAd
)
High-end Configuration
Declared Sound Power (L
WAd
)
3.4 3.9
3.4 4.0
3.6 4.2
5.1 5.2
The Declared A-weighted Sound Pressure Level in decibels (re 2x10-5 Pa), at Operator, Bystander, and Desk Side Positions are
measured in accordance with ISO 7779 7.6.1, 7.6.2, and C.15.2 and declared in accordanc e with ISO 9296 for this product is as
follows1:
Operating Mode
Idle
HDD Operating
90% CPU
ODD Operating
1
All tests are conducted according to ISO 7779 and declared according to ISO 9296 except 90% CPU. For this mode, the system CPU was stressed
at 90% utilization with no other peripheral device actively seeking. This test mode is not specified in ISO 7779, but was measured using the same
microphone distances and measurement techniques defined for the other reported operating modes.
2
Declared Sound Power rounded to nearest tenth of a bel per ISO 9296 section 4.4.2
The Declared Noise Emission in accordance with ISO 9296 for the Dell OptiPlex 7010 SFF is as follows:
(all values L
Operating Mode
Idle
HDD Operating
90% CPU
ODD Operating
expressed in bels; 1 bel=10 decibels, re 10
WAd
Declared Sound Power (L
Typical Configuration High-end Configuration
Ivy Bridge i5 3470 Ivy Bridge i5 3770
4G DDR3 1600MHz 8G DDR3 1600MHz(x2)
500G 7200RPM SATA3 1T 7200RPM SATA3
8X 12.7 SATA DVDRW 8X 12.7 SATA DVDRW
Intel® HD Graphics Family ATI Radeon HD7570
-12
Watts)
Typical Configuration
WAd
High-end Configuration
)
Declared Sound Power (L
WAd
)
3.9 4.3
3.9 4.3
3.9 4.4
4.8 4.8
The Declared A-weighted Sound Pressure Level in decibels (re 2x10-5 Pa), at Operator, Bystander, and Desk Side Positions are
measured in accordance with ISO 7779 7.6.1, 7.6.2, and C.15.2 and declared in accordanc e with ISO 9296 for this product is as
follows1:
Operating Mode
Idle
HDD Operating
90% CPU
ODD Operating
1
All tests are conducted according to ISO 7779 and declared according to ISO 9296 except 90% CPU. For this mode, the system CPU was stressed
at 90% utilization with no other peripheral device actively seeking. This test mode is not specified in ISO 7779, but was measured using the same
microphone distances and measurement techniques defined for the other reported operating modes.
2
Declared Sound Power rounded to nearest tenth of a bel per ISO 9296 section 4.4.2
The Declared Noise Emission in accordance with ISO 9296 for the Dell Optiplex 7010 USFF is as follows:
(all values L
Operating Mode
Idle
HDD Operating
90% CPU
ODD Operating
expressed in bels; 1 bel=10 decibels, re 10
WAd
Declared Sound Power (L
Typical Configuration
Ivy Bridge i5 3470
4G DDR3 1600MHz
500G 7200RPM SATA2
8X 12.7 SATA DVDRW
Intel® HD Graphics Family
-12
Watts)
Typical Configuration
WAd
)
3.9
3.9
4.8
4.7
The Declared A-weighted Sound Pressure Level in decibels (re 2x10-5 Pa), at Operator, Bystander, and Desk Side Positions are
measured in accordance with ISO 7779 7.6.1, 7.6.2, and C.15.2 and declared in accordanc e with ISO 9296 for this product is as
follows1:
Operating Mode
Idle
HDD Operating
90% CPU
ODD Operating
1
All tests are conducted according to ISO 7779 and declared according to ISO 9296 except 90% CPU. For this mode, the system CPU was stressed
at 90% utilization with no other peripheral device actively seeking. This test mode is not specified in ISO 7779, but was measured using the same
microphone distances and measurement techniques defined for the other reported operating modes.
2
Declared Sound Power rounded to nearest tenth of a bel per ISO 9296 section 4.4.2
Typical Configuration Declared Sound Pressure
(LpA)
Table-Top Floor-Standing
Operator
Position
(LpA)
Bystander
Position
(LpA)
Operator
Position
(LpA)
Bystander
Position
(LpA)
28.5 25.4 22.9 21.6
28.6 25.6 22.9 21.7
28.9 25.8 23.8 21.9
40.3 35.9 32.5 29.9
47
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.