Dell 5500 Series, Networking 5500 Series, Networking 5524, Networking 5524P, Networking 5548 Specifications

Dell Networking 5500 Series

Dell Networking 5500 Gigabit Ethernet switches are scalable access switches that give you the power
and flexibility.

The Dell 5500 series switches are designed to oer secure,
fixed-port Gigabit Ethernet switching solutions to deliver
full wire-speed switching performance. With 24 or 48
built-in copper Gigabit Ethernet ports in a 1U form factor,
the 5500 series has a total switching capacity of up to 176
Gbps to support demanding network environments. The
switches also oer simple management and scalability
via a 40Gbps high-availability stacking architecture that
allows you to manage up to eight switches from a single
IP address, and share the dual SFP+ across the stack for
uplinks to the next layer in your network. The switches are
designed for Energy Ecient Ethernet (802.3az), which will
reduce per port power consumption up to 50% if the link
is idle, and further reduction if ports are inactive.

Stacking and 10Gb support

Your next deployment can be greatly simplified by utilizing
the built-in stacking and 10Gb capabilities of the 5500 series
of switches. Up to 400 ports can be managed from a single
IP address using the highly-available stacking architecture,
and the entire stack can be redundantly linked back to the
rest of the network at 10Gb via the dual SFP+ ports.

Robust security

Advanced security features of 5500 series switches
help protect the network from accidental or malicious
interference. Edge authentication using IEEE 802.1x
provides a meaningful security solution which is centralized
and easier to manage than standard ACLs. The 5500 series
provides password management for increased network
security, encrypted management trac through SSL or
SSH, and secures SNMP access by filtering hosts based on
IP address. MAC-based port security is designed to prevent
unauthorized MAC addresses from accessing the network.
RADIUS and TACACS+ support enables centralized, remote
authentication of administrative access to the switch.

Advanced switching features

The 5500 series switches feature enhanced VLAN support
such as Voice VLANs and Guest VLANs. Other features
include LLDP (Link Layer Discovery Protocol) which allows
for troubleshooting and enhanced network management
over multi-vendor environments, as well as LLDP-MED and
DHCP Snooping to further expand network security. The
switches also support USB auto-configuration so you can
rapidly deploy the switches in minutes without setting up
complex TFTP configurations or sending technical sta to
remote oces.

Easy, powerful enterprise management

The 5500 series switches feature many enterprise
management capabilities to help network administrators
optimize network trac including QoS to support
VoIP-capable infrastructures, multicast support to help
reduce unnecessary network trac, link aggregation
for expanded network bandwidth, and dynamic VLAN
configuration. The 5500 series switches can be managed
via a familiar and intuitive command line interface (CLI),
web GUI, third party SNMP-based management console
applications, Telnet, or serial connections.

Power over Ethernet (PoE) support

The 5500 series PoE switches oer PoE-per-port support
for power-dependent network applications including
WLAN Access Points (WAPs), Voice over IP (VoIP) handsets,
video conferencing and badge reading*. The 5524P
and 5548P switches can provide up to 15.4 watts of
power for network-attached devices on up to 24 ports
simultaneously, with the MPS-600 power module enabling
up to 48 ports.

Lifetime Warranty

Select Networking switches are backed
by an industry-leading, lifetime warranty
which guarantees Basic Hardware Service
(repair or replacement) for life. Details at

Dell.com/LifetimeWarranty**

Product Dell 5524 & 5524P Dell 5548 & 5548P

48 10/100/1000BASE-T auto-sensing Gigabit Ethernet switching
ports; 2 SFP+ ports for fiber media support; 2 HDMI Stacking Ports
5548P: Up to 15.4 watts per port (with optional external power
supply) on all 48 ports

Switch Fabric Capacity 176.0 Gb/s
Forwarding Rate 100.2 Mpps
Up to 16,000 MAC Addresses

5524P, 5548P:
* 440 x 381 x 43.2 mm (W x D x H)
* 17.32 x 15 x 1.7 in (W x D x H)
* 1U, rack-mounting kit included
* Approximate weight: 6.1 kg / 13.45 lb

Port types

Performance

Port configuration

Management

Quality of Service

Security

VLAN

Multicast

Switching features

Availability

Chassis

Power

Peripheral products

24 10/100/1000BASE-T auto-sensing Gigabit Ethernet
switching ports; 2 SFP+ ports for fiber media support; 2 HDMI
Stacking Ports 5524P: Up to 15.4 watts per port on all 24 ports

Switch Fabric Capacity 128.0 Gb/s
Forwarding Rate 65.47 Mpps
Up to 16,000 MAC Addresses

Auto-negotiation for speed, duplex mode and flow control
Auto MDI/MDIX
Port mirroring
Broadcast storm control
Energy Ecient Ethernet (IEEE802.3az) per port settings
Port profiles- predefined macros to help automatically configure ports.
Up to 64 Static Routes Supported

Web-based management interface
Industry-standard CLI accessible via Telnet or Local Serial Port
SNMPv1, SNMP v2c, SNMPv3 supported
USB Drive Support: Auto-Configuration, Firmware
4 RMON groups supported (history, statistics, alarms, and events)
TFTP transfers of firmware and configuration files
Dual firmware images on-board
Multiple configuration file upload/download supported
Statistics for error monitoring and performance optimization including port summary tables
BootP/DHCP IP address management supported
Syslog remote logging capabilities
LLDP-MED
SNTP
iSCSI Auto Configuration

8 priority queues per port
Layer 2 Trusted Mode (IEEE 802.1p tagging), Layer 3 Trusted Mode (DSCP)
Adjustable Weighted-Round-Robin (WRR) and Strict Queue Scheduling
IPv4 and IPv6 support

Switch access password protection, including strong password support
User-definable settings for enabling or disabling Web, SSH, Telnet, SSL management access
Port-based MAC Address alert and lock-down
IP Address filtering for management access via Telnet, HTTP, HTTPS/SSL, SSH, and SNMP
RADIUS and TACACS+ remote authentication for switch management access
SSLv3 and SSHv2 encryption for switch management trac
Management access filtering via Management Access Profiles
IEEE 802.1x–based edge authentication

802.1x monitor mode to aid in .1x troubleshooting
MAC and IP based ACLs, Time controlled ACLs
Dynamic ARP Inspection

IEEE 802.1Q tagging and port-based, up to 4,000 user-configurable VLANs
Protocol-based VLANs
Dynamic VLANs with GVRP support

IGMP v1/v2/v3 snooping
IGMP snooping for IP multicast support
IGMP Querier
Static IP Multicast

Link Aggregation with support for up to 32 aggregated links per switch and up to 8 member ports per aggregated link (IEEE 802.3ad)
LACP support (IEEE 802.3ad)
Port mirroring
Jumbo frame support up to 10K
DHCP Server support, DHCP Snooping, DHCP Relay

External redundant power support with RPS-720 (sold separately), MPS-600 (sold separately)
Spanning Tree (IEEE 802.1D) and Rapid Spanning Tree (IEEE 802.1w) with Fast Link support
Spanning Tree optional features – STP root guard, BPDU guard, BPDU filtering
Dual firmware images
Configuration file upload and download
Switch Auditing support
sFlow

5524, 5548:
* 440 x 255 x 43.2 mm (W x D x H)
* 17.32 x 10.03 x 1.7 in (W x D x H)
* 1U, rack-mounting kit included
* Approximate weight: 3.33 kg / 7.35 lb

Internal Power Supply Voltage AC 110/240 V +- 10% (50/60Hz)
Power Consumption Max (Watts): 5524 (29.4W); 5524P (380W, all ports as PoE); 5548 (48.8W); 5548P (542.1W, All ports as PoE)

RPS-720 Redundant Power Supply (5524, 5548), MPS-600 (5524P, 5548P)
Dell SFP Transceivers (1000-SX and 1000-LX), Dell SFP+ Transceivers (SR, LR, LRM, Twin-ax)

Models available with US Trade Agreements Act (TAA) compliance.

©2014 Dell Inc. All rights reserved. Dell, the DELL logo and the DELL badge are trademarks of Dell Inc. Other trademarks and trade names may be used in this
document to refer to either the entities claiming the marks and names or their products. Dell disclaims proprietary interest in the marks and names of others.
This document is for informational purposes only. Dell reserves the right to make changes without further notice to the products herein. The content provided
is as-is and without expressed or implied warranties of any kind.

*PoE models fully support end-point devices running the IEEE 802.3af PoE standard but may not support pre-standard end-point devices.

**Select Dell Networking products carry a Lifetime Limited Warranty with Basic Hardware Service (repair or replacement) for life. Repair or replacement does
not include troubleshooting, configuration, or other advanced service provided by Dell ProSupport. For more details see dell.com/lifetimewarranty.

See all networking products at Dell.com/Networking

January 2014 | Version 2.1

dell-networking-5000-series-spec-sheet