Dell E04S001, N732H User Manual

Dell™ PowerEdge™

T710 Systems

Getting Started

With Your System

Guide de mise en route

Primeiros passos com o sistema

Procedimientos iniciales con el sistema

Dell™ PowerEdge™

T710 Systems

Getting Started

With Your System

Model E04S Regulatory type E04S001

Notes, Cautions, and Warnings

NOTE: A NOTE indicates important information that helps you make better use

of your computer.

CAUTION: A CAUTION indicates potential damage to hardware or loss of data

if instructions are not followed.

WARNING: A WARNING indicates a potential for property damage, personal

injury, or death.

____________________

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell, the DELL logo, and PowerEdge are trademarks of Dell Inc.;

Intel and Xeon are registered trademarks of Intel Corporation in the U.S. and other countries; Microsoft, Windows, Windows Server, and Hyper-V are either trademarks or registered trademarks of Microsoft

Corporation in the United States and/or other countries; Red Hat and Enterprise Linux are registered trademarks of Red Hat, Inc. in the United States and other countries; SUSE is a registered trademark of Novell, Inc. in the United States and other countries; VMware is a registered trademark of VMware, Inc. in the United States and/or other jurisdictions; Citrix and XenServer are trademarks of Citrix Systems, Inc. and/or more of its subsidiaries, and may be registered in the United States Patent and Trademark Office and in other countries.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

Model E04S Regulatory type E04S001

March 2009 P/N N732H Rev. A00

Installation and Configuration

WARNING: Before performing the following procedure, review the safety

instructions that came with the system.

NOTE: If you are using the optional rack configuration, assemble the rails

and install the system in the rack following the safety instructions and the rack installation instructions provided with your system.

Stabilizing the Tower System

WARNING: The tower system has four feet on its bottom panel that can be

extended outward to help properly stabilize the system. Failure to extend the feet poses the risk of having the system tip over, possibly causing bodily injury or damage to the system.

Getting Started With Your System 3

Optional – Connecting the Keyboard, Mouse, and Monitor

Connect the keyboard, mouse, and monitor (optional).

The connectors on the back of your system have icons indicating which cable to plug into each connector. Be sure to tighten the screws (if any) on the monitor's cable connector.

Connecting the Power Cable(s)

Connect the system’s power cable(s) to the system and, if a monitor is used, connect the monitor’s power cable to the monitor.

4 Getting Started With Your System

Securing the Power Cable(s)

Bend the system power cable(s) into a loop as shown in the illustration and secure the cable with the provided strap.

Plug the other end of the power cable(s) into a grounded electrical outlet or a separate power source such as an uninterrupted power supply (UPS) or a power distribution unit (PDU).

Turning On the System

Press the power button on the system and on the optional monitor, if used. The power indicators should light.

Getting Started With Your System 5

Complete the Operating System Setup

If you purchased a preinstalled operating system, see the operating system documentation that ships with your system. To install an operating system for the first time, see the installation and configuration documentation for your operating system. Be sure the operating system is installed before installing hardware or software not purchased with the system.

Supported Operating Systems

• Microsoft® Windows® Small Business Server 2008 Standard and Premium (x64) editions

• Microsoft Windows Small Business Server 2008 Standard and Premium editions with SP2

• Microsoft Windows Small Business Server 2003 R2 Standard and Premium (32-bit x86) editions

• Microsoft Windows Server editions

• Microsoft Windows Server 2008 Standard, Enterprise, and Datacenter (x64) editions

• Microsoft Windows Server 2008 Standard, Enterprise, and Datacenter editions with SP2

• Microsoft Windows Essential Business Server 2008 Standard and Premium editions with SP2

• Microsoft Windows Server 2003 Standard and Enterprise (32-bit x86) editions with SP2

• Microsoft Windows Server 2003 Standard and Enterprise (x64) editions (SP1 and later)

• Microsoft Windows Server 2003 R2 Standard and Enterprise (32-bit x86) editions with SP2

• Microsoft Windows Server 2003 R2 Standard, Enterprise, and Datacenter (x64) editions (SP1 and later)

•Red Hat

• Red Hat Enterprise Linux AS and ES (Version 4) (x86_64)

• Red Hat Enterprise Linux Server 5 (x86)

Enterprise Linux® AS and ES (Version 4) (x86)

2008 Standard and Enterprise (32-bit x86)

6 Getting Started With Your System

• Red Hat Enterprise Linux Server 5 (x86_64)

•SUSE

Linux Enterprise Server 10 SP2 (x86_64)

• SUSE Linux Enterprise Server 11 (x86_64)

•VMware

ESX Version 3.5 Update 4

• VMware ESX Version 4.0

• VMware ESXi Version 3.5 Update

(embedded)

• VMware ESXi Version 4.0 (embedded)

•Citrix

XenServer™ Enterprise edition 5.x (embedded)

• Microsoft Hyper-V™

NOTE: For the latest information on supported operating systems,

see www.dell.com.

Other Information You May Need

WARNING: See the safety and regulatory information that shipped with

your system. Warranty information may be included within this document or as a separate document.

• The rack documentation included with your rack solution describes how to install your system into a rack.

• The

• Any media that ships with your system that provides documentation

Hardware Owner’s Manual

provides information about system features and describes how to troubleshoot the system and install or replace system components. This document is available online at

support.dell.com

and tools for configuring and managing your system, including those pertaining to the operating system, system management software, system updates, and system components that you purchased with your system.

NOTE: Always check for updates on support.dell.com and read the updates

first because they often supersede information in other documents.

Getting Started With Your System 7

Obtaining Technical Assistance

If you do not understand a procedure in this guide or if the system does not perform as expected, see your Hardware Owner’s Manual. Dell™ offers comprehensive hardware training and certification. See www.dell.com/training for more information. This service may not be offered in all locations.

Technical Specifications

Processor

Processor type Intel

Expansion Bus

Bus type PCI Express Generation 2

Expansion slots Slot 0: PCIe x8 Storage

Memory

Architecture 800-Mhz, 1066-MHz, or 1333-MHz DDR3

Memory module sockets Eighteen 240-pin

Memory module capacities 1 GB, 2 GB, 4 GB, or 8 GB (16 GB when

Minimum RAM 1 GB

Maximum RAM 144 GB

Xeon® Processor 5500 series

Slot 1: PCIe x4

Slot 2: PCIe x16

Slot 3: PCIe x8

Slot 4: PCIe x8

Slot 5: PCIe x8

Slot 6: PCIe x8

NOTE: A maximum of 110W is allocated to add-in

cards. All slots support up to 25W, but a maximum of 2x 25W cards and 4x 15W cards may be installed at any time, regardless of the slots they are installed in.

registered or unbuffered Error Correcting Code (ECC) DIMMs.

available)

8 Getting Started With Your System

Drives

Hard drives Up to sixteen 2.5-inch, hot-swap SAS/SATA/SSD

internal drives or up to eight 3.5-inch, hot-swap SAS/SATA/SSD internal drives

NOTE: 3.5-inch SSD is supported using 2.5-inch

SSD in a 3.5-inch carrier with an insert.

Diskette drive External optional USB 1.44-MB

Optical drive Up to two optional external USB DVD-ROM

or internal DVD-ROM (SATA) or DVD+RW (SATA)

NOTE: DVD devices are data only.

Tape drive One 5.25-inch half-height tape backup device

Connectors

Back

NIC

Serial

USB

Video

Front

USB

Internal

USB

Internal secure digital (SD) module

Four RJ-45 (for integrated 1-GB NICs)

9-pin, DTE, 16550-compatible

Six 4-pin, USB 2.0-compliant

15-pin VGA

Two 4-pin, USB 2.0-compliant

One 4-pin, USB 2.0-compliant

One optional flash memory card slot on internal SD module

Getting Started With Your System 9

Video

Video type Matrox G200eW video controller; VGA connector

Video memory 8 MB

Power

AC power supply (per power supply)

Wa t ta g e

Vo lt ag e

Heat dissipation

Maximum inrush current

Batteries

System battery

RAID battery (optional)

Physical

Height 21.8 cm (8.6 in)

Width 43.1 cm (17 in)

Depth 69.7 cm (27.4 in)

Weight (maximum configuration)

Weight (empty) 26.7 kg (59 lb)

1100 W

100–240 VAC, 50/60 Hz, 8.0–4.0 A

1026 BTU/hr maximum

Under typical line conditions and over the entire system ambient operating range, the inrush current may reach 25 A per power supply for 10 ms or less.

CR 2032 3.0-V lithium coin cell

3.7-V lithium ion battery pack

35.3 kg (78 lb)

10 Getting Started With Your System

Environmental

NOTE: For additional information about environmental measurements for specific

system configurations, see www.dell.com/environmental_datasheets.

Temperature

Operating

10° to 35°C (50° to 95°F) with a maximum temperature gradation of 10°C per hour

NOTE: For altitudes above 2950 feet, the maximum

operating temperature is derated 1ºF/550 ft.

Storage

Relative humidity

Operating

Storage

Maximum vibration

Operating

Storage

Maximum shock

Operating

Storage

Altitude

Operating

–40° to 65°C (–40° to 149°F) with a maximum temperature gradation of 20°C per hour

8% to 85% (noncondensing) with a maximum humidity gradation of 10% per hour

5% to 95% (noncondensing)

0.25 G at 3–200 Hz for 15 min

0.5 G at 3–200 Hz for 15 min

One shock pulse in the positive z axis (one pulse on each side of the system) of 31 G for 2.6 ms in the operational orientation

Six consecutively executed shock pulses in the positive and negative x, y, and z axes (one pulse on each side of the system) of 71 G for up to 2 ms

–16 to 3,048 m (–50 to 10,000 ft)

NOTE: For altitudes above 2950 feet, the maximum

operating temperature is derated 1ºF/550 ft.

Storage

Airborne Contaminant Level

Class

–16 to 10,600 m (–50 to 35,000 ft)

G2 or lower as defined by ISA-S71.04-1985

Getting Started With Your System 11

12 Getting Started With Your System

Systèmes Dell™

PowerEdge™ T710

Guide de mise

en route

Modèle E04S Type réglementaire E04S001

+ 35 hidden pages