Dell N4000 User Manual

Page 1
DELL EMC NETWORKING N4000 SERIES SWITCHES
Energy-ecient, cost-eective 10GbE switches for modernizing and scaling network infrastructure
The N4000 switch series oers a power-ecient and resilient 10 Gigabit Ethernet (10GbE) switching solution with support for 40GbE uplinks for advanced Layer 3 distribution for oces and campus networks. The N4000 switch series has high-performance capabilities and wire­speed performance utilizing a non-blocking architecture to easily handle unexpected trac loads. The N4000 series includes dual internal hot­swappable 80PLUS-certied power supplies for high availability and power eciency. The switches oer simple management and scalability via exible user port stacking at 10Gbps or 40Gbps. The high-availability stacking architecture allows management of up to 12 switches from a single IP address.
Modernize campus network architectures
Modernize campus network architectures with a power-ecient and resilient 10/40GbE switching solution for environments requiring high throughput and availability at the aggregation or core. For greater interoperability in multivendor networks, N4000 series switches oer the latest open-standard protocols and include technology to interface with Cisco protocol RPVST+* and devices using CDP.
Achieve high availability and full bandwidth utilization with Multi-chassis Link Aggregation (MLAG). N4000 series switches support MLAG to create active/active loop-free redundancy without spanning tree. Server rooms can deliver reliable server and storage connectivity with features to help save time and avoid conguration errors. These high density 24-port or 48-port 10GbE switches are ready for converged fabric requirements for SAN and LAN networks with loss-less operation for iSCSI environments with Data Center Bridging (DCB). N4000 supports VRF-lite, allowing it to be partitioned into multiple virtual routers with isolated control and data planes on the same physical switch. The N4000 series is also fully tested and validated to work with Dell EqualLogic™ PS­Series storage arrays.**
Leverage familiar tools and practices
All N-Series switches include Dell Networking OS 6, designed for easier deployment, greater interoperability and a lower learning curve for network administrators. One common command line interface (CLI) and GUI using a well-known command language gets skilled network administrators productive quickly. With USB auto-conguration, network administrators can rapidly deploy mirrored congurations to numerous devices by simply inserting a USB key.
*Available starting with Dell Networking OS 6.1 release **Contact your Dell EMC representative for a full list of validated storage arrays. ***Select Networking products carry a Lifetime Limited Warranty with Basic Hardware Service (repair or replacement) for life. Repair or replacement does not include troubleshooting, conguration, or other advanced service provided by Dell ProSupport.
Deploy with condence at any scale
N4000 series switches help create performance assurance with a data rate up to 1.28Tbps (full duplex) and a forwarding rate up to 952Mpps. Scale easily with 10/40Gbps user port stacking supporting distances up to 100 meters. Switch stacks of up to 672 10GbE ports can be managed from a single screen using the highly-available stacking architecture for high-density aggregation with seamless redundant availability. N-Series switches help provide certainty with a lifetime warranty that covers software upgrades, hardware repair or replacement as well as optics and cables purchased with the switch. Details at Dell.com/ LifetimeWarranty.***
Hardware, performance and eciency
Up to 32 10GbE ports (N4032 and N4032F) and up to 64 10GbE ports (N4064 and N4064F) using breakout cables.
Converged network support for DCB with Priority Flow Control (802.1Qbb), ETS (802.1Qaz), DCBx, iSCSI TLV Support.
Up to 672 10GbE ports in a 12-unit stack for high-density, high-avail­ability aggregation and distribution in wiring closets/MDFs. Non-stop forwarding and fast failover in stack congurations.
Hot swappable expansion module supporting dual-port QSFP+ (8x 10GbE), quad-port 10GBaseT and quad-port SFP+.
Dual 80PLUS-certied ecient hot swappable power supplies and redundant variable speed fan operation help decrease cooling and power costs.
Energy-Ecient Ethernet and lower power PHYs reduce power to inactive ports and idle links, providing energy savings from the power cord to the port.
Dell Fresh Air compliance for operation in environments up to 113°F (45°C) helps reduce cooling costs in temperature constrained deployments.
Deploying, conguring and managing
Tool-less ReadyRails™ signicantly reduces rack installation time.
USB auto-conguration rapidly deploys the switches without complex TFTP congurations or sending technical sta to remote oces.
Plug-and-Play conguration with Dell EqualLogic iSCSI storage arrays** and one-command iSCSI setup alleviates multiple step con­guration and potential conguration errors.
Page 2
Product Description
N4032: 24x 10GbE RJ45 auto-sensing (10Gb/1Gb/100Mb) xed ports, 1x hot swap expansion module bay, 2x
redundant 460W PSU included
N4032F: 24x 10GbE SFP+ auto-sensing (10Gb/1Gb) xed ports, 1x hot swap expansion module bay, 2x
N4000 series
Power cords
Modules (optional)
Optics (optional)
Cables (optional)
redundant 460W PSU included
N4064: 48x 10GbE RJ45 auto-sensing (10Gb/1Gb/100Mb) xed ports, 2x 40GbE QSFP+ xed ports, 1x hot
swap expansion module bay, 2x redundant 460W PSU included
N4064F: 48x 10GbE SFP+ auto-sensing (10Gb/1Gb) xed ports, 2x 40GbE QSFP+ xed ports, 1x hot swap
expansion module bay, 2x redundant 460W PSU included
125V, 15A, 10 feet, NEMA 5-15/C13 250V, 12A, 2 meters, C13/C14 Country- and region-specic power cord options available
4-port 10 Gigabit SFP+ hot swappable module 4-port 10 Gigabit Base-T RJ-45 hot swappable module 2-port 40 Gigabit QSFP+ hot swappable module
Transceiver, SFP, 1000BASE-T Transceiver, SFP, 1000BASE-SX, 850nm wavelength, up to 550m reach Transceiver, SFP, 1000BASE-LX, 1310nm wavelength, up to 10km reach Transceiver, SFP+, 10GbE, LRM, 1310nm wavelength, up to 220m reach Transceiver, SFP+, 10GbE, SR, 850nm wavelength, up to 300m reach Transceiver, SFP+, 10GbE, LR, 1310nm wavelength, up to 10km reach Transceiver, QSFP+, 40GbE, SR4, 850nm wavelength, up to 150m reach Transceiver, QSFP+, 40GbE, ESR, 850nm wavelength, up to 300m reach Transceiver, QSFP+, 40GbE, LR4, 1310nm wavelength, up to 10km reach Transceiver, QSFP+, 40GbE, PSM4 with 1m, 5m or 15m pigtail to MPO
Dell Networking cable, SFP+ to SFP+, 10GbE, copper twinax direct attach cable, 0.5m, 1m, 3m, 5m, 7m Dell Networking cable, QSFP+ to 4x SFP+, 40GbE to 4x10GbE, passive copper breakout cable, 0.5m, 1m, 3m, 5m, 7m Dell Networking cable, QSFP+ to QSFP+, 40GbE, passive copper direct attach cable, 0.5m, 1m, 3m, 5m, 7m OM3 MTP ber cable, QSFP+ to QSFP+, 40GbE, requires QSFP+ optics, 1m, 3m, 5m, 7m, 10m, 25m, 50m, 75m, 100m Fiber breakout cable, QSFP+ to 4x SFP+, 40GbE MTP to 4x 10GbE LC, requires 1x QSFP+ and 4x SFP+ optics, 1m, 3m, 5m, 7m
Technical specications
Physical
User port stacking up to 100m using 10Gb or 40Gb supporting up to 160Gbps on N4032 and 320Gbps on N4064 (full duplex) Rear out-of-band management port (10/100/1000BASE-T) USB (Type A) port for conguration via USB ash drive Auto-negotiation for speed and ow control Auto-MDI/MDIX, port mirroring Flow-based port mirroring Broadcast storm control Energy-Ecient Ethernet per port settings Redundant variable speed fans Air ow: I/O to power supply Dual redundant hot swappable power supplies included: 460W RJ45 console/management port with RS232 signaling (RJ-45 to female DB-9 connector cable included) Dual rmware images on-board
Chassis
Size (1RU, H x W x D): 1.71 in x 17.08 in x 18.11 in (43.43 mm x 433.83 mm x 459.99 mm) (Power supply handle adds 1.13 in or 28.7 mm)
Approximate weight: 21.67lbs/9.83kg (N4032),
21.14lbs/9.59kg (N4032F), 24.07lbs/10.92kg (N4064), 23.28lbs/10.56kg (N4064F) ReadyRails rack mounting system, no tools required
Environmental
Power supply eciency: 80% or better in all operating modes Max. thermal output (BTU/hr): 823.44 (N4032),
603.86 (N4032F), 1353.53 (N4064), 754.82 (N4064F) Power consumption max (watts): 240 (N4032), 176 (N4032F), 395 (N4064), 220 (N4064F) Operating temperature: 32° to 113°F (0° to 45°C) Operating relative humidity: 90% Storage temperature: –4° to 158°F (–20° to 70°C) Storage relative humidity: 95%
Performance
MAC addresses: 131,072 Static routes: 1,024 (IPv4)/1,024 (IPv6) Dynamic routes: 8,160 (IPv4)/4,096 (IPv6) Switch fabric capacity: 640Gbps (N4032 and N4032F) (full duplex)
1.28Tbps (N4064 and N4064F) Forwarding rate: 476Mpps (N4032 and N4032F) 952Mpps (N4064 and N4064F) Link aggregation: 128 LAG groups, 144 dynamic ports per stack, 8 member ports per LAG Queues per port: 8 Line-rate Layer 2 switching: All (non-blocking) Line-rate Layer 3 routing: All (non-blocking) Flash memory: 256MB Packet buer memory: 9MB CPU memory: 2GB OSPF routing interfaces: 8,160 RIP routing interfaces: 512 ECMP next hops per route: 4 ECMP groups: 1,024 VLAN routing interfaces: 128 VLANs supported: 4,094 Protocol-based VLANs: Supported Multicast forwarding entries: 512 (IPv4), 256 (IPv6) ARP entries: 6,144 NDP entries: 1024 Access control lists (ACL): Supported
2 © 2017 Dell Inc. All Rights Reserved.
Page 3
MAC and IP-based ACLs: Supported Time-controlled ACLs: Supported Max number of ACLs: 100 Max ACL rules system-wide: 3,072 Max rules per ACL: 1,023 Max ACL rules per interface (IPv4): 2,047 (ingress), 1,023 (egress) Max ACL rules per interface (IPv6): 1,021 (ingress), 512 (egress) Max VLAN interfaces with ACLs applied: 24
IEEE compliance
802.1AB LLDP Dell Voice VLAN Dell ISDP (inter-operates with devices running CDP)
802.1D Bridging, Spanning Tree
802.1p Ethernet Priority (User Provisioning and Mapping) Dell Adjustable WRR and Strict Queue Scheduling
802.1Q VLAN Tagging, Double VLAN Tagging, GVRP
802.1Qaz DCBx, Enhanced Transmission Selection (ETS)
802.1Qbb Priority-based Flow Control (PFC)
802.1S Multiple Spanning Tree (MSTP)
802.1v Protocol-based VLANs
802.1W Rapid Spanning Tree (RSTP) Dell RSTP-Per VLAN (compatible with Cisco’s RPVST+)* Dell Spanning tree optional features: STP root guard, BPDU guard, BPDU ltering
802.1X Network Access Control, Auto VLAN
802.2 Logical Link Control
802.3 10BASE-T
802.3ab Gigabit Ethernet (1000BASE-T)
802.3ac Frame Extensions for VLAN Tagging
802.3ad Link Aggregation with LACP
802.3ae 10 Gigabit Ethernet (10GBASE-X)
802.3AX LAG Load Balancing Dell Mutli-Chassis LAG (MLAG) Dell Policy Based Forwarding
802.3az Energy-Ecient Ethernet (EEE)
802.3u Fast Ethernet (100BASE-TX) on management ports
802.3x Flow Control
802.3z Gigabit Ethernet (1000BASE-X) ANSI LLDP-MED (TIA-1057) Dell EqualLogic iSCSI Auto-conguration MTU 9,216 bytes *Available starting with Dell Networking OS 6.1 release
RFC compliance and additional features
General Internet protocols
General Internet protocols are supported. For a detailed list, please contact your Dell EMC representative.
General IPv4 protocols
General IPv4 protocols are supported. For a detailed list, please contact your Dell EMC representative.
General IPv6 protocols
General IPv6 protocols are supported. For a detailed list, please contact your Dell EMC representative.
Layer 3 functionality
1058 RIPv1 2453 RIPv2 1724 RIPv2 MIB Extension 2740 OSPFv3 1765 OSPF DB overow 2787 VRRP MIB 1850 OSPF MIB 3101 NSSA 2082 RIP-2 MD5 Auth 3137 OSPF Stub Router Advert 2328 OSPFv2 3623 Graceful Restart 2338 VRRP 3768 VRRP 2370 Opaque LSA Option 4271 BGP Dell Policy Based Routing 5187 OSPFv3 Graceful Restart
Multicast
1112 IGMPv1 3810 MLDv2 2236 IGMPv2 3973 PIM-DM 2365 Admin scoped IP Mcast 4541 IGMP v1/v2/ v3 Snooping 2710 MLDv1 and Querier 2932 IPv4 MIB 4601 PIM-SM 2933 IGMP MIB 5060 PIM MIB 3376 IGMPv3 Dell Static IP Multicast Draft-ietf-pim-sm-bsr-05 Draft-ietf-idmr-dvmrp-v3-10 DVMRP Draft-ietf-magma-igmp-proxy-06.txt IGMP/MLD Proxying Draft-ietf-magma-igmpv3-and-routing-05.txt draft-ietf-idmr-dvmrp-mib-11 draft-ietf-magma-mgmd-mib-05 draft-ietf-pim-bsr-mib-06 IEEE 802.1ag draft 8.1 – Connectivity Fault Management (CFM) IEEE 802.1p GMRP Dynamic L2 Multicast Registration
Quality of service
2474 DiServ Field 2697 srTCM 2475 DiServ Architecture 4115 trTCM 2597 Assured Fwd PHB Dell L4 Trusted Mode Dell Port Based QoS Services (TCP/UDP) Mode Dell Red/WRED Dell Flow Based QoS Services Dell Audio Video
Network management and security
1155 SMIv1 1157 SNMPv1 1212 Concise MIB Denitions 1213 MIB-II 1215 SNMP Traps 1286 Bridge MIB 1442 SMIv2 14 51 Manager-to-Manager MIB 1492 TACACS+ 1493 Managed objects for Bridges MIB 1573 Evolution of Interfaces 1612 DNS Resolver MIB Extensions 1643 Ethernet-like MIB 1757 RMON MIB
1867 HTML/2.0 Forms with le upload extensions 190 1 Community-based SNMPv2 1907 SNMPv2 MIB 1908 Coexistence between SNMPv1/v2 2011 IP MIB 2012 TCP MIB 2013 UDP MIB 2068 HTTP/1.1 2096 IP Forwarding Table MIB 2233 Interfaces Group using SMIv2 2246 TLS v1 2271 SNMP Framework MIB
2295 Transport Content Negotiation 2296 Remote Variant Selection 2346 AES Ciphersuites for TLS 2576 Coexistence between SNMPv1/v2/v3 2578 SMIv2 2579 Textual Conventions for SMIv2 2580 Conformance Statements for SMIv2 2613 RMON MIB 2618 RADIUS Authentication MIB 2620 RADIUS Accounting MIB 2665 Ethernet-like Interfaces MIB 2666 Identication of Ethernet chipsets 2674 Extended Bridge MIB 2737 ENTITY MIB 2818 HTTP over TLS 2819 RMON MIB (groups 1, 2, 3, 9) 2856 Text Conv. For High Capacity Data Types 2863 Interfaces MIB 2865 RADIUS 2866 RADIUS Accounting 2868 RADIUS Attributes for Tunnel Prot. 2869 RADIUS Extensions 3410 Internet Standard Mgmt. Framework 3411 SNMP Management Framework 3412 Message Processing and Dispatching 3413 SNMP Applications 3414 User-based security model
3415 View-based control model 3416 SNMPv2 3417 Transport Mappings 3418 SNMP MIB 3577 RMON MIB 3580 802.1X with RADIUS
3737 Registry of RMON MIB 4 08 6 Randomness Requirements 4113 UDP MIB 4251 SSHv2 Protocol 4252 SSHv2 Authentication 4253 SSHv2 Transport 4254 SSHv2 Connection Protocol 4419 SSHv2 Transport Layer Protocol 4521 LDAP Extensions 4716 SECSH Public Key File Format 6101 SSL 6398 IP Router Alert
Dell Enterprise MIB
supporting routing features draft-ietf­hubmib-etherif­mib-v3-00.txt (Obsoletes RFC
2665)
Dell LAG MIB Support
for 802.3ad functionality
Dell sow version 1.3
draft 5 Dell 802.1x Monitor Mode Dell Custom Login Banners Dell Dynamic ARP Inspection Dell IP Address Filtering Dell Tiered Authentication Dell RSPAN Dell Change of Authorization Dell OpenFlow 1.3 Dell Python Scripting Dell Support Assist HiveManager NG
3 © 2017 Dell Inc. All Rights Reserved.
Page 4
Regulatory, environment and other compliance
Safety and emissions
Australia/New Zealand: ACMA RCA Class A Canada: ICES Class A; cUL China: CCC Class A; NAL Europe: CE Class A Japan: VCCI Class A USA: FCC Class A; NRTL UL; FDA 21 CFR 1040.10 and
1040.11 Eurasia Customs Union: EAC Germany: GS mark Product meets EMC and safety standards in many countries inclusive of USA, Canada, EU, Japan, China. For more country-specic regulatory information, and approvals, please see your Dell representative.
RoHS
Product meets RoHS compliance standards in many countries inclusive of USA, EU, China, and India. For more country-specic RoHS compliance information, please see your Dell representative. EU WEEE EU Battery Directive REACH
Energy
Japan: JEL
Certications (available or coming soon)
Available with US Trade Agreements Act (TAA) compliance. N-Series products have the necessary features to support a PCI compliant network topology.
IT Lifecycle Services for Networking
Experts, insights and ease
Our highly trained experts, with innovative tools and proven processes, help you transform your IT investments into strategic advantages.
Plan & Design
Let us analyze your multivendor environment and deliver a comprehensive report and action plan to build upon the existing network and improve performance.
Deploy & Integrate
Get new wired or wireless network technology installed and congured with ProDeploy. Reduce costs, save time, and get up and running fast.
Educate
Ensure your sta builds the right skills for long-term success. Get certied on Dell EMC Networking technology and learn how to increase performance and optimize infrastructure.
Gain access to technical experts and quickly resolve multivendor networking challenges with ProSupport. Spend less time resolving network issues and more time innovating.
Optimize
Maximize performance for dynamic IT environments with Dell EMC Optimize. Benet from in-depth predictive analysis, remote monitoring and a dedicated systems analyst for your network.
Retire
We can help you resell or retire excess hardware while meeting local regulatory guidelines and acting in an environmentally responsible way.
Manage & Support
Learn more at
Dell.com/lifecycleservices
Learn more at Dell.com/Networking
4 © 2017 Dell Inc. All Rights Reserved.
© 2017 Dell Inc. All rights reserved. Dell, the DELL logo and the DELL badge are trademarks of Dell Inc. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell disclaims proprietary interest in the marks and names of others. This document is for informational purposes only. Dell reserves the right to make changes without further notice to the products herein. The content provided is as-is and without expressed or implied warranties of any kind. Additional features may be supported and not listed. For a detailed list, please contact your Dell representative.
May 2017 | v3.1 Dell EMC Networking N4000 Series Spec Sheet
Loading...