Delfield F18MR44A General Manual

Short Form Specifications

Exterior Top is constructed of one piece 16-gauge stainless steel,
with integral 2.12” (5.4cm) square nosing on front and 4” (10.2cm)
high by 2” (5.1cm) thick backsplash on rear. Top has opening for use
with 1/6 size pans. Pans and adapter bars supplied by others. Pans
are recessed 3” (7.6cm) or 2” (5.1cm) and rest on adjustable pan sup­ports. Opening is supplied with removable 20-gauge stainless steel
cover. Temperature in top opening maintains 33°F (1°C) to 41°F
(5°C), with pans recessed 3” (7.6cm), at 86°F ambient room temper­ature, meeting NSF7 requirements.

Exterior back and bottom of base are constructed of 24-gauge galva­nized steel. Exterior ends are constructed of 18-gauge stainless steel.

Base interior has a 22-gauge stainless steel back and bottom. Interior
ends and door frames are formed of ABS plastic. Base is insulated with a
minimum of 1.50” (3.8cm) foamed in place high density polyurethane.

Door(s) are constructed with ABS plastic interior liner and 22­gauge stainless steel exterior front. Door(s) have a black recessed
handle and a snap in magnetic gasket which is easily replaceable.

Base is furnished with a blower coil especially made to fit behind
door mullion. Blower coil housing encloses refrigeration lines,
evaporator coil, expansion valve and fans. Unit is designed to main­tain 36°F (2°C) to 40°F (4°C) in the base.

Unit is mounted on 6.13” (15.6cm) high adjustable stainless steel legs.
Electrical connections are 115 volt, 60 Hertz, single phase. Unit

must be hard wired.
Refrigeration System Component — HFC-404A.

Optional Accessories & Modifications

906A Stainless steel end
505H Stainless steel back
505F Laminate facing (full front)
906E Laminate end
905A Laminate back
1030A Cutting board (Salalite or composite)
109 Condensate evaporator (1 per coil) for base
107F Tray rack
102 Drawers

A-(2) 19” in lieu of one door
B-(2) 27” in lieu of one door
C-(2) 32” in lieu of one door

108 Locks
120F Cold pan drain
213 *220V/50 cycle

*Inclusion of this option will alter the

electrical specifications of the unit

Model F18MR44D

31.5” (80cm) Deep Reomte Mega Top Salad Tables

The Delfield Company, P.O. Box 470, Mt Pleasant, MI 48804-0470, U.S.A. • [phone] • Fax [phone] • www.delfield.com

Delfield reserves the right to make changes in design or specifications without prior notice. ©2001 The Delfield Company.All rights reserved. Printed in U.S.A.

PROJECT

ITEM #

QUANTITY DATE

APPROVAL

F18MR

®

F18MR

The Delfield Company, P.O. Box 470, Mt Pleasant, MI 48804-0470, U.S.A. • [phone] • Fax [phone] • www.delfield.com

Delfield reserves the right to make changes in design or specifications without prior notice. ©2001 The Delfield Company.All rights reserved. Printed in U.S.A.

31.5” (80cm) Deep Reomte Mega Top Salad Tables

31" [78.7cm]

31.5"

[80"cm]

21.62" x 13.00" NSF-7 STYLE COLD
PAN SIZED TO ACCOMMODATE (6)
1/6 SIZE PANS 6" DP. WITH HINGED
REMOVABLE COVER. (PANS AND
ADAPTER BARS BY OTHERS)

PLAN VIEW

F18MR31A

44" [111.8cm] 44" [111.8cm]

21.62" x 13.00" NSF-7 STYLE COLD
PAN SIZED TO ACCOMMODATE (6)
1/6 SIZE PANS 6" DP. WITH HINGED
REMOVABLE COVER. (PANS AND
ADAPTER BARS BY OTHERS)

52" [132.1cm] 52" [132.1cm] 52" [132.1cm]

21.62" x 13.00" NSF-7 STYLE COLD
PAN SIZED TO ACCOMMODATE (6)
1/6 SIZE PANS 6" DP. WITH HINGED
REMOVABLE COVER. (PANS AND
ADAPTER BARS BY OTHERS)

PLAN VIEW
F18MR44A

31.5"

[80"cm]

31.5"

[80"cm]

21.62" x 26.00" NSF-7 STYLE COLD
PAN SIZED TO ACCOMMODATE (12)
1/6 SIZE PANS 6" DP. WITH HINGED
REMOVABLE COVER. (PANS AND
ADAPTER BARS BY OTHERS)

21.62" x 26.00" NSF-7 STYLE COLD
PAN SIZED TO ACCOMMODATE (12)
1/6 SIZE PANS 6" DP. WITH HINGED
REMOVABLE COVER. (PANS AND
ADAPTER BARS BY OTHERS)

PLAN VIEW
F18MR44D

31.5"

[80"cm]

31.5"

[80"cm]

21.62" x 39.00" NSF-7 STYLE COLD
PAN SIZED TO ACCOMMODATE (18)
1/6 SIZE PANS 6" DP. WITH HINGED
REMOVABLE COVER. (PANS AND
ADAPTER BARS BY OTHERS)

31.5"

[80"cm]

PLAN VIEW

F18MR52A

PLAN VIEW
F18MR52D

PLAN VIEW
F18MR52E