Delfield F18DC General Manual

ROJECT

ITE #

QUANTITY

 

DATE

A ROVAL

F18DC

31.5” (80cm) Deep Self-Contained Quick Glance Rail

Short Form Specifications

Exterior top is one-piece, 16-gauge stainless steel, with integral 2.12”

(5.4cm) high square nosing on front. Top has a mechanically cooled refrigerated raised rail at rear with openings to accommodate 1/6 size pans. Pans and adapter bars are provided by others. Pans are recessed .38” in the front for easy access and 3.38” in the rear for proper cooling (see cross section). Rail interior is 22-gauge stainless steel. Raised rail openings have 20-gauge stainless steel hinged removable lids. Unit is equipped with separate expansion valve and on/off switch for refrigerated rail. Temperature in top opening to maintain 33°F (1°C) to 41°F (5°C), at 86°F ambient room temperature, meeting NSF7 requirements.

Exterior Back and Bottom are 24-gauge galvanized steel. Exterior ends are finished with 18-gauge galvanized steel.

Base Interior is 22-gauge stainless steel back and bottom. Base interior ends and door frames are thermoformed ABS plastic. Base is insulated with 1.5” (3.8cm) high density foamed in place polyurethane.

Door(s) have a 22-gauge stainless steel exterior front, with thermoformed

ABS plastic interior liner, black recessed handle and snap in magnetic gas-

ket which is easily replaceable. Each interior door section has (1) remov-

able epoxy coated wire shelf.

Base has a blower coil assembly with expansion valve located behind door mullion. Base is equipped with independently controlled thermostat and solenoid valve. On/off switch for unit is located behind the hinged panel.

Unit is mounted on 6.13” (15.6cm) high adjustable stainless steel legs.

Electrical connections are 115 volt, 60 Hertz, single phase. Unit is supplied with 8' cord and plug.

Refrigeration System Components — HFC-404A.

Model F18DC82

Optional Accessories & Modifications

906A Stainless steel end

505H Stainless steel back

505F Laminate facing (full front)

906E Laminate end

905A Laminate back

1030A Cutting board (Sanalite or composite)

109 Condensate evaporator (1 per coil) for base

107F Tray rack

102 Drawers

A-(2) 19” in lieu of one door

B-(2) 27” in lieu of one door

C-(2) 32” in lieu of one door

E-(3) 19” in lieu of one door

F-(3) 27” in lieu of one door

G-(3) 32” in lieu of one door

H-(2) 24” in lieu of one door

J-(3) 24” in lieu of one door

108 Locks

120F Cold pan drain

213 *220V/50 cycle

*Inclusion of this option will alter the

electrical specifications of the unit

The Delfield Company, P.O. Box 470, Mt Pleasant, MI 48804-0470, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com

Delfield reserves the right to make changes in design or specifications without prior notice. ©2001 The Delfield Company. All rights reserved. Printed in U.S.A.

Delfield F18DC General Manual

F18DC

31.5” (80cm) Deep Self-Contained Quick Glance Rail

ELEVATION VIEW

ELEVATION VIEW

F18DC52

F18DC60

2.5

43.75

36.00

27" REF'G

27" REF'G

 

 

 

 

 

 

 

 

 

 

 

6.13 7.63

 

 

 

 

 

 

 

 

 

ELEVATION VIEW

 

 

 

ELEVATION VIEW

F18DC68

 

 

 

F18DC82

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ELEVATION VIEW

ELEVATION VIEW

F18DC91

F18DC99

The Delfield Company, P.O. Box 470, Mt Pleasant, MI 48804-0470, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com

Delfield reserves the right to make changes in design or specifications without prior notice. ©2001 The Delfield Company. All rights reserved. Printed in U.S.A.

Loading...
+ 2 hidden pages