FlexiShield® Food Shields
Original Instructions
Installation, Operation and Maintenance Manual
This manual is updated as new information and models are released. Visit our website for the latest manual.
Part Number: 9291476 05/18
Safety Notices
Warning
n
Read this manual thoroughly before operating, installing
or performing maintenance on the equipment. Failure
to follow instructions in this manual can cause property
damage, injury or death.
DANGER
Do not install or operate equipment that has been misused,
abused, neglected, damaged, or altered/modified from
that of original manufactured specifications.
DANGER
The on-site supervisor is responsible for ensuring that
operators are made aware of the inherent dangers of
operating this equipment.
Warning
n
This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision concerning use
of the appliance by a person responsible for their safety.
Do not allow children to play with this appliance.
Warning
n
Do not store or use gasoline or other flammable vapors
or liquids in the vicinity of this or any other appliance.
Never use flammable oil soaked cloths or combustible
cleaning solutions, for cleaning.
Warning
n
Authorized Service Representatives are obligated to follow
industry standard safety procedures, including, but not
limited to, local/national regulations for disconnection
/ lock out / tag out procedures for all utilities including
electric, gas, water and steam.
Warning
n
Use caution when handling metal surface edges of all
equipment.
Note
Proper installation, care and maintenance are essential
for maximum performance and trouble-free operation of
your equipment. Visit our website www.wbtkitchencare.
com for manual updates, translations, or contact
information for service agents in your area.
Section 1
General Information
Section 2
Installation
Section 3
Maintenance
Table of Contents
Model Numbers ................................................................................................................ 4
Warranty Information........................................................................................................ 4
Regulatory Certifications ................................................................................................... 4
Location ............................................................................................................................ 5
Dimensions ....................................................................................................................... 5
Mounting Directions .......................................................................................................... 6
Cleaning and Sanitizing Procedures ................................................................................... 7
Hardware And Glass Cleaning ............................................................................................ 7
Part Number: 9291476 05/18 3
Section 1
General Information
Model Numbers
This manual covers the following food shields:
Radial Glass Front, Single Tier with Glass Shelf, Single Service,
Inside & Outside
DCFSRIG-2 DCFSRIG-4 DCFSROG-2 DCFSROG-4
DCFSRIG-3 DCFSRIG-5 DCFSROG-3 DCFSROG-5
Radial Single Tier, Fixed Sneeze Guard Front, Dual Service
DCFSRKD-2 DCFSRKD-3 DCFSRKD-4 DCFSRKD-5
Radial Single Tier, Fixed Sneeze Guard Front, Single Service,
Inside & Outside
DCFSRIKS-2 DCFSRIKS-4 DCFSROKS-2 DCFSROKS-4
DCFSRIKS-3 DCFSRIKS-5 DCFSROKS-3 DCFSROKS-5
Overshelf, Radial Front
DCFSCR DCFSCRD DCFSOS-XX DCFSOS2-XX
Glass Front, Single Tier with Glass Shelf, Single Service
DCFSG
Glass Front, Double Tier with Two Glass Shelves, Single Service
DCFSG2
Glass Front, Slicer Shield Style
DCFSSS
Two Tier Display, Sneeze Guard, Single Service
DCFSH
Two Tier Display With Sneeze Guard, Dual Service
DCFSHD
Flexible Shield, Converts to Three Positions
DCFSFS
Flexible Shield, Converts to Three Positions, Two Tier
DCFSFS2
Single Tier, Fixed Sneeze Guard Front, Dual Service
DCFSKD
Single Tier, Fixed Sneeze Guard Front, Single Service
DCFSKS
Double Tier, Bottom Tier Full Glass Front, Second Tier Sneeze
Guard
DCFSGH
Double Tier, Bottom Tier Sneeze Guard, Second Tier Full Glass
Front
DCFSHG
Warranty Information
• Register your product for warranty,
• Verify warranty information,
• View and download a copy of your warranty,
at www.delfield.com/warranty
Regulatory Certifications
All food shields are certified by:
•
•
•
National Sanitation Foundation (NSF)
Underwriters Laboratories (UL)
Underwriters Laboratories of Canada (CUL)
4 Part Number: 9291476 05/18
Section 2
Installation
DANGER
Installation must comply with all applicable fire and
health codes in your jurisdiction.
DANGER
Use appropriate safety equipment during installation and
servicing
Warning
n
Remove all removable panels before lifting and installing.
Location
Warning
n
To avoid instability the installation area must be capable
of supporting the combined weight of the equipment
and product. Additionally the equipment must be level
side to side and front to back.
Warning
n
This equipment is intended for indoor use only. Do not
install or operate this equipment in outdoor areas.
The location selected for the equipment must meet the
following criteria. If any of these criteria are not met, select
another location.
• Units are intended for indoor use only.
• The location MUST be level, stable and capable of
supporting the weight of the equipment.
• The location MUST be free from and clear of combustible
materials.
• Equipment MUST be level both front to back and side to
side.
• Position the equipment so it will not tip or slide.
• Recommended air temperature is 60°F - 100°F
(16°C - 38°C).
Dimensions
Model Length Width Height
Radial Glass Front, Single Tier with Glass Shelf, Single Service,
Inside & Outside
DCFSRIG-2 38.47”(98cm)
DCFSRIG-3 53.43” (136cm)
DCFSRIG-4 68.17” (173cm)
DCFSRIG-5 82.61” (210cm)
DCFSROG-2 43.09” (109cm)
DCFSROG-3 59.85” (152cm)
DCFSROG-4 76.35” (194cm)
DCFSROG-5 92.53” (235cm)
Radial Single Tier, Fixed Sneeze Guard Front, Dual Service
DCFSRKD-2 40.78” (104cm)
DCFSRKD-3 56.64” (144cm)
DCFSRKD-4 72.26” (184cm)
DCFSRKD-5 87.57” (222cm)
Radial Single Tier, Fixed Sneeze Guard Front, Single Service,
Inside & Outside
DCFSRIKS-2 38.47” (98cm)
DCFSRIKS-3 53.43” (136cm)
DCFSRIKS-4 68.17” (173cm)
DCFSRIKS-5 82.61” (210cm)
DCFSROKS-2 43.09” (109cm)
DCFSROKS-3 59.85” (152cm)
DCFSROKS-4 76.35” (194cm)
DCFSROKS-5 92.53” (235cm)
Overshelf, Radial Front
DCFSCR 24.00” (61cm) 24.00” (61cm) 16.00” (41cm)
DCFSCRD 24.00” (61cm) 24.00” (61cm) 26.00” (66cm)
DCFSOS-XX XX” 18.00” (46cm) 16.00” (41cm)
DCFSOS2-XX XX” 18.00” (46cm) 26.00” (66cm)
Glass Front, Single Tier with Glass Shelf, Single Service
DCFSG XX 18.00” (46cm) 16.00” (41cm)
Glass Front, Double Tier with Two Glass Shelves, Single Service
DCFSG2 XX 18.00” (46cm) 26.00” (66cm)
Glass Front, Slicer Shield Style
DCFSSS XX 18.00” (46cm) YY
Two Tier Display, Sneeze Guard, Single Service
DCFSH XX 18.00” (46cm) 26.00” (66cm)
18.00”(46cm) 18.00”(46cm)
35.50” (90cm) 14.75” (37cm)
18.00”(46cm) 14.75” (37cm)
Part Number: 9291476 05/18 5
Installation Section 2
Model Length Width Height
Two Tier Display With Sneeze Guard, Dual Service
DCFSHD XX 33.50” (85cm) 26.00” (66cm)
Flexible Shield, Converts to Three Positions
DCFSFS XX 18.00” (46cm) 16.00” (41cm)
Flexible Shield, Converts to Three Positions, Two Tier
DCFSFS2 XX 18.00” (46cm) 26.00” (66cm)
Single Tier, Fixed Sneeze Guard Front, Dual Service
DCFSKD XX 33.50” (85cm) 16.00” (41cm)
Single Tier, Fixed Sneeze Guard Front, Single Service
DCFSKS XX 18.00” (46cm) 16.00” (41cm)
Double Tier, Bottom Tier Full Glass Front, Second Tier Sneeze
Guard
DCFSGH XX 18.00” (46cm) 26.00” (66cm)
Double Tier, Bottom Tier Sneeze Guard, Second Tier Full Glass
Front
DCFSHG XX 18.00” (46cm) 26.00” (66cm)
Mounting Directions
FlexiShield® food shields are to be used as food and counter
protection only and should not be used in any other way.
1. Set food shield on base unit.
3. Drill holes in base unit.
A. For counter top mounting drill 5/32” holes.
B. For under counter mounting drill 3/8” holes.
4. Install with screws provided.
A. For counter top mounting install with screws
through the flanges.
B. For under counter mounting install with 1/4”-20
bolts and washers from beneath the counter.
Bolt and washer beneath counter
5. Make any necessary electrical connections.
6. If applicable test lights, heat lamps etc.
7. Adjust glass for proper alignment and ensure that all
hardware is tightened securely.
8. Clean food shield and glass with mild soap and water.
By placing the food shield on the base unit,
hole locations can be determined
2. Mark hole locations.
A. For counter top mounting mark the flange holes.
Flange dimensions
B. For under counter mounting mark the leg locations.
6 Part Number: 9291476 05/18
Section 3
Maintenance
DANGER
It is the responsibility of the equipment owner to perform
a personal protective equipment hazard assessment
to ensure adequate protection during maintenance
procedures.
Warning
n
When using cleaning fluids or chemicals, rubber gloves
and eye protection (and/or face shield) must be worn.
Warning
n
Never use a high-pressure water jet for cleaning or hose
down or flood the units with water. Do not use power
cleaning equipment, steel wool, scrapers or wire brushes
on stainless steel or painted surfaces.
Caution
,
Never use an acid based cleaning solution! Many food
products have an acidic content, which can deteriorate
the finish. Be sure to clean the stainless steel surfaces of
ALL food products.
Caution
,
Maintenance and servicing work other than cleaning as
described in this manual must be done by an authorized
service personnel.
Cleaning and Sanitizing Procedures
You are responsible for maintaining the equipment
in accordance with the instructions in this manual.
Maintenance procedures are not covered by the warranty.
Clean the area around the unit as often as necessary to
maintain cleanliness and efficient operation.
Wipe surfaces with a damp cloth rinsed in water to remove
dust and dirt from the unit. Always rub with the “grain” of
the stainless steel to avoid marring the finish. If a greasy
residue persists, use a damp cloth rinsed in a mild dish soap
and water solution. Wipe dry with a clean, soft cloth.
Never use steel wool or abrasive pads for cleaning. Never use
chlorinated, citrus based or abrasive cleaners.
Stainless steel has a clear coating that is stain resistant and
easy to clean. Products containing abrasives will damage
the coating and scratch the panels. Daily cleaning may be
followed by an application of stainless steel cleaner which
will eliminate water spotting and fingerprints. Early signs of
stainless steel breakdown are small pits and cracks. If this
has begun, clean thoroughly and start to apply stainless steel
cleaners in attempt to restore the steel.
Hardware And Glass Cleaning
Routine cleaning can be done with soap and water. Extreme
stains or grease should be cleaned with a nonabrasive
cleaner and plastic scrub pad. Polish the chrome when
necessary with a soft cotton cloth.
Part Number: 9291476 05/18 7
DELFIELD
980 SOUTH ISABELLA ROAD, MOUNT PLEASANT, MI 48858
WWW.DELFIELD.COM
800-733-8821
WWW.WELBILT.COM
Welbilt provides the world’s top chefs, and premier chain operators or growing independents with industry leading equipment and soluons.
Our cung-edge designs and lean manufacturing taccs are powered by deep knowledge, operator insights, and culinary experse.
All of our products are backed by KitchenCare® – our aermarket, repair, and parts service.
CLEVELAND
CONVOTHERM®
©2017 Welbilt Inc. except where explicitly stated otherwise. All rights reserved. Connuing product improvement may necessitate change of specicaons without noce.
Part Number: 9291476 05/18
DELFIELD®
FITKITCHEN™
FRYMASTER®
GARLAND
KOLPAK®
LINCOLN
MANITOWOC®
MERCO®
MERRYCHEF®
MULTIPLEX®
Loading...