PROJECT
ITEM #
QUANTITY |
|
DATE |
APPROVAL
DC
Tray Delivery Cart
Short Form
Specifications
Exterior Body is one piece 18-gauge stainless steel, reinforced on sides and back with 16-gauge reinforced channels. Louvered vents on end panels of cart permit air circulation and heat dissipation. Unit mounted on 6” (15.24cm) wide high modulas casters, two locking, two fixed. Full perimeter non-marking bottom bumper provided.
Top is constructed of 16-gauge stainless steel, welded, ground and polished into one integral unit securely attached to the body framework. Top is fabricated with square exterior corners with top corner bumpers. Push handle located at rear of unit.
Bottom is constructed of 16-gauge stainless steel with floor kinked to floor drain, plug provided (two drains on double bay carts and one on single bay carts). 14-gauge reinforcement caster channels provided.
Door is constructed of 20-gauge stainless steel mounted to unit on three heavy-duty hinges. Foam insulated to reduce noise and vibration. Door to open on a full 270° swing with positive latching in open or closed positions.
Tray slides to be field adjustable and removable; to accomodate tray lengths from 16” (40.64cm) to 20.25” (51.43cm) long and up to 15” (38.1cm) wide. Tray slide is 2” (5.08cm) wide with 4.5” (11.43cm) spacing.
Optional Accessories and Modifications:
• Laminate on all sides (not available for top surface)
• 2” top rail (adds 2” to overall height of unit)
Model DC20
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
DC
Tray Delivery Cart
MODEL DC16
PLAN VIEW |
FRONT ELEVATION |
END ELEVATION |
REAR ELEVATION |
|
|
|
MODEL DC20
PLAN VIEW
FRONT |
END ELEVATION |
REAR ELEVATION |
ELEVATION |
|
|
|
|
MODEL DC24
PLAN VIEW
FRONT ELEVATION |
END ELEVATION |
|
MODEL DC28
PLAN VIEW
FRONT ELEVATION |
END ELEVATION |
|
MODEL DC36
PLAN VIEW
FRONT ELEVATION |
END ELEVATION |
Mechanical Data — Standard Unit
MODELNUMBER TRAY SHIP WEIGHT
NUMBER OF DOORS CAPACITY LBS./KG.
DC16 1 16 249/113
DC20 1 20 275/125
DC24 2 24 326/148
DC28 2 28 350/159
DC36 2 36 398/181
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
MSDC 03/02