DA-41
Compact dual axis
control for conventional
press brake applications
Compact solutions
With the new DA-41 a compact solution for conventional press brake applications is provided.
The DA-41 control provides a complete solution for conventional press brake applications for 2 axes. Including the axes control for the press beam and backgauge and flexible I/O configuration, the state of the art electronics offers
a versatile solution.
The axes control supports servo control, two-speed AC control as well as unipolair control. Depending on the application you can select either two-side positioning as well as single side positioning with spindle fault elimination.
With its bright LCD display a clear and easy control is offered. The numerical programming, having angle and tool parameters, can be done in a direct table overview.
The bend parameters can be selected via a user-friendly cursor manipulation.
DA-41 featuring:
•Bright LCD display
•Beam stop control
•Backgauge control
•Angle programming
•Tool programming
•Retract function
•Up to 100 programs
•Up to 25 bends per program
•Panel based housing
•Servo control / unipolair / AC two-speed control
E v e r y t h i n g u n d e r c o n t r o l