DeDietrich DTI1031 Manual To Installation And Use

EN GUIDE TO INSTALLATION AND USE

Cooking Hob

DTI1031X Induction Modular Hob

2

Dear Customer,

You have just acquired a DE DIETRICH hob and we would like to thank you.

In order to offer you an excellent product, our research teams have creat­ed this new generation of appliances for you. Their quality, appearance,
functions and technological advances make them exceptional products,
showcases of our unique know-how.

In the line of DE DIETRICH products, you will also find a wide range of
ovens, microwaves, ventilation hoods, hoods, dishwashers, and refrigera­tors, all of which can be integrated and all of which can be coordinated
with your new DE DIETRICH hob.
Of course, in our ongoing desire to ensure our products satisfy your needs
in the best possible way, our customer service department is always at
your disposal at our site.

DE DIETRICH

Setting New Values

We are constantly improving our products; for this reason we reserve the right to make all
modifications to their technical, functional or aesthetic characteristics, originating from tech­nical developments.

Warning

Before installing and using your appliance please read this installation and use the guide

carefully - it will help you familiarise yourself very rapidly with its operation.

EN

3

CONTENTS

1 / INSTALLING YOUR APPLIANCE

• Installation

_________________________________________________________

4

• Connection

_________________________________________________________

5

2 / USING YOUR APPLIANCE

• The induction principle

_______________________________________________

6

• Description of your top

_______________________________________________

7

• Using a cooking zone

________________________________________________

8

• Additional functions

_________________________________________________

8
Preheating
Function Boil
Independent timer
Elapsed time
Child safety
Clean lock

• Safety features when operating

________________________________________

10

3 / MAINTAINING YOUR APPLIANCE

_________________________________________

11

4 / SPECIAL MESSAGES, DIFFICULTIES

______________________________________

12

5 / AFTER-SALES SERVICE __________________________________________________ 13

EN

4

1 / INSTALLING YOUR APPLIANCE

•

•

CHOOSING THE POSITION

The distance between the edge of your appliance
and the side and rear walls (or partitions) must be
at least four centimetres (zone A).
YYoouurr aapppplliiaannccee mmaayy bbee bbuuiilltt iinn wwiitthhoouutt aannyy rreessttrriicc-

-

ttiioonn.. CChheecckk,, hhoowweevveerr,, tthhaatt tthhee aaiirr iinnttaakkee aanndd oouutt-

-

lleett aarree ffrreeee ooff oobbssttrruuccttiioonn ((sseeee ““ddeessccrriippttiioonn oof

f

yyoouurr aapppplliiaannccee”” cchhaapptteerr)).

.

The building-in method opposite is recommended
for use above an oven or a built-in appliance.

BUILDING-IN

Follow the diagram above.
Glue the foam seal underneath your appliance, fol­lowing the perimeter of the hole in the worktop,
upon which your appliance will rest. This will
ensure a good seal against the worktop.
Attach the clips to the hob

(depending on the

model

).

4 cm

4 cm

4 cm

Entrée d'air

Sortie d'air

4 cm

A

v

v

e

e

n

n

t

t

i

i

l

l

a

a

t

t

i

i

o

o

n

n

s

s

p

p

a

a

c

c

e

e

ll

•

•

L

L

ll’

’

LL’

’

66,,4

4

AAbboovvee aann oovveenn

MIN 4 mm

AAbboovvee aa ccaabbiinneett
wwiitthh aa ddoooorr oorr ddrraawweer

r

Tip

If your hob is located above your oven, the hob’s thermal safety devices can impede the
simultaneous use of the hob and the oven’s pyrolysis program.
Your hob is equipped with an anti-overheating safety system.
This safety device can trigger, for example, when the hob is installed over an oven that is not suf­ficiently insulated. If this occurs, a series of small lines appears on the control panel. In such cir­cumstances we recommend that you increase the hob’s ventilation by creating an opening in the
side of the cabinet, (8 x 5 cm), and/or installing an oven insulation kit available from the after-sales
department.

Air outlet

Air intake

EN

5

1 / INSTALLING YOUR APPLIANCE

Warning

If the cable is damaged it must be replaced by the manufacturer, its after-sales service

or a person with a similar qualification to prevent danger.

These hobs must be connected to the mains using a socket in compliance with publication CEI
60083 or an all-pole circuit-breaker device in compliance with the installation rules in force.

When power is first supplied to your hob, or after an extended power cut, an indicator light will
appear on the control panel. This information will disappear after 30 seconds.

Connection

N

L

Green/yellow

Blue

Brown

32A

EarthNeutral Phase

DTI731X

6

EN

2 / USING YOUR APPLIANCE

• The induction principle

The principle of induction is based on a mag­netic effect.
When you place your cookware on a cooking
zone and you turn it on, the electronic circuits
in your cooking hob produce “induced” cur­rents in the bottom of the cookware which
instantly raise its temperature. This heat is
then transmitted to the food
To help you choose, a list of cookware is pro­vided with this guide.

We have designed this cooking hob for use by private individuals in their homes.
These cooking hobs are intended exclusively for cooking beverages and foodstuffs and do not
contain any asbestos-based materials.
This appliance is not intended to be used by persons (including children) with reduced physical,
sensory or mental abilities, or persons lacking experience or awareness, unless using it with the
help of a person reponsible for their safety, or under supervision and with prior instruction in its
use. Children should be supervised to ensure that they do not play with the appliance.

+

-

CC

BB

AA

• Cookware

Most cookware is compatible with induction.
To verify that your cookware is suitable, place
it on a heating area (16 or 23cm) on power 4.

- If the display remains on, your cookware is
compatible.

- If the display flashes, your cookware cannot
be used with induction cooking.

You can also use a magnet to test the cook­ware.
If a magnet “sticks” to the bottom of the cook­ware, it is compatible with induction.

Only glass, terra cotta, aluminium without a
special finish on the bottom, copper and some
non-magnetic stainless steels do not work
with induction cooking. We recommend that
you select cookware with a thick, flat bottom.
When you buy your cookware, make sure that
this logo is on the package; it assures you that
it is compatible with induction cooking.

A - Induction plate

B - Electronic circuit

C - Induced currents

•Choosing a cooking area

Cooking

area

Diameter of base

of cookware

2288 ccm

m

12 ..... 32 cm

EN

7

2 / USING YOUR APPLIANCE

Description of your top

•

•

AAddjjuussttmmeenntt ttoouucchh ccoonnttrroolls

s

The touchpads allow you to adjust power,
timer, programmer...

BB

adjusting the power

CC

preselecting the power

DD

function

BOIL

EE

adjusting the timer

FF

function

ELAPSED TIME

GG

locking - unlocking - Clean lock

DDTTII1100331

1

2288 ccmm

B

C

D

E

F

A

TToottaall ddiimmeennssiioonnss ((LL xx l))
DTI1031X : 38 x 52

RReecceessss ccuutt--oouutt ((LL’’ xx l’’))
DTI1031X : 34 x 49

PPoowweerr ::
DTI1031X : 4600W

G

Indicator for
selected zone

Power
display

Timer display

The button is used to switch the cooking
zone on or off.

If there is no cookware on the selected zone, your adjustments will delete automatically after a
few moments.

EN

8

cally by your hob depending on the power
level chosen.

- When

HHU

U

is displayed, if you do not adjust the
cooking power, the zone turns itself off after a
few moments.

• BOIL

This function allows water to be boiled and
kept at boiling point to cook any food that
requires boiling.

- Give a short press on button

D

D

. You will
hear a short beep. “2l” (2 litres) id displayed
as the default.

- Adjust the volume of water to between 0.5
and 6 litres, using the + and – buttons (

B

B

).

The quantities of water are 0.5l, 1l, 1.5l, 2l,

2.5l, 3l, 4l, 5l and 6litres.

- Give a short press on button

D

D

to confirm
the selection. A short beep sounds and the
“

bbooiil

l

” display stops flashing.
Once the water has boiled, a series of beeps
is heard and the word “boil” scrolls through
the display (

b

b

, then

o

o

, etc...)

- add the food (pasta, rice etc.). Give a short
press on button

D

D

. Power 12 or 13 and 1 min
is displayed by default.
Adjust the time, using the buttons

E

E

. If you

wish, you may alter the power via the buttons

B

B

.
The settings are confirmed automatically
after a few seconds or by pressing button

D

D

.

A short beep sounds.

NNOOTTEE:: IItt iiss iimmppoorrttaanntt tthhaatt tthhee wwaatteerr tteemmppeerraa-

-

ttuurree iiss nneeiitthheerr ttoooo hhoott nnoorr ttoooo ccoolldd wwhheen

n

ccooookkiinngg bbeeggiinnss,, aass tthhiiss ccoouulldd aaffffeecctt tthhee ffiinnaal

l

rreessuulltt.

.

TThhiiss ffuunnccttiioonn mmaayy bbee uusseedd oonn aallll ccooookkiinng

g

zzoonneess aatt tthhee ssaammee ttiimmee.

.

DDoo nnoott uussee ccaasstt iirroonn ccooookkwwaarree.

.

DDoo nnoott uussee aa lliidd.

.

DDoo nnoott uussee ssaalltt.

.

Using a cooking zone

AAddjjuussttiinngg tthhee ppoowweerr lleevveell:

:

- Place your cookware on the cooking zone
and press the corresponding touchpad

A

A

.

A beep and a light will confirm your selection.

- Adjust the power with touchpads

B

B

,

C

C

.

- Pressing the touchpad several times
allows you to access preselected power
levels (4 - 8 - 15).

SSwwiittcchhiinngg ooffff aa ccooookkiinngg zzoonne

e

- Hold you finger down on touchpad

A

A

AAddjjuussttiinngg tthhee ttiimmeerr:

:

-- AAddjjuusstt tthhee ttiimmeerr uussiinngg ttoouucchhppaadd

D.

- When cooking is finished, “0” is displayed and
a beep sounds. Press touchpad

AA.

.

NNootte

e

:

- The first touch on

EE “–

–

” directly selects 99

minutes.

- Simultaneous touch on

E

E

“

+

+

” and “

–

–

” cancels

the timing in progress.

- If you do not make a selection or if there is no
cookware, the selected zone turns off after a
few moments.

Additional functions

•Preheating

This function allows a higher temperature to be
reached more rapidly, followed by an automa­tic return to cooking power.

- Switch on the cooking zone.

- Turn on preheating with the touchpad

B

B

“

-

-

”,

HHUU

is displayed on your hob.

- Pre-adjust the cooking piower with touchpad

B

B

(higher than 6). A beep will confirm your
adjustment after a few moments. Cooking
starts.

- During the pre-heating stage,

HHU

U

and the

cooking power display alternately.

- After the pre-heating stage, your hob displays
the cooking power.

NNootte

e

:

- The pre-heating time is calculated automati-

2 / USING YOUR APPLIANCE

B

C

D

E

F

A

G

EN

9

2 / USING YOUR APPLIANCE

•Independent timer

This function allows you to time an event, with­out cooking.

- Select a cooking zone you are not using.

- Set the time with touchpad E. A “t” flashes in

the display.

- At the end of your adjustment “t” becomes

becomes fixed and the count begins.

Note:

You can stop a count in progress by keeping
your finger on the touchpad of the selection
on the display.

•Elapsed time

This function displays the time elapsed since
the last power setting adjustment on a chosen
zone.

To use this function, press the

F

F

button. The
elapsed time flashes on the timer display of
the selected zone.

If you want cooking to end in a specific period,
press button

F

F

then, in 5 seconds, press “+”
on the timer to increase the cooking time that
you wish to set. The time display becomes
steady for 3 seconds then the remaining time
is displayed. There is a beep to confirm your
choice.

This function exists with or without the timer
function.

Note: If a time is displayed on the timer, this
time cannot be changed during the 5 seconds
after pressing the

F

F

button. Once these 5 sec­onds have elapsed, you may change your
cooking time.

•Child safety

This functioin allows you to lock your hob
when it is shut off or when it is cooking.
To lock:

- Keep your finger on touchpad G. A beep

sounds and an indicator appears. The indi­cator will go out automatically after a few
moments.

To unlock:

- Keep your finger on touchpad G. A beep

sounds and the indicator goes out.

Note:

- In locked mode, any action will produce a
key symbol on the display. You must unlock
your hob before using it.

- If you activate the lock while cooking, the
stop display will be prioritised on the lock.

•Clean lock

This function allows you to temporarily lock
your hob while cleaning.
To activate Clean lock:

- Your cooking hob must be turned off.

- Briefly press touchpad G. A beep sounds
and an indicator appears.

- After a predefined time, the lock will auto­matically disengage. A beep sounds and the
indicator goes out.

B

C

D

E

F

A

G

10

EN

2 / USING YOUR APPLIANCE

Safety when operating

•Residual heat

After a long cooking period, the zone used
can remain hot for several minutes. An ‘’H’’
flashes during this period. Do not put your
hand on the zone.

•Temperature limiter

Each cooking zone is equipped with a safety
sensor that constantly monitors the tempera­ture of the bottom of the cookware. If you
leave empty cookware on a zone which is
turned on, it will automatically limit the power
in order to prevent damage to the cookware
or hob.

• Protection against overflows

In case of overflow, or of a metallic object or
wet cloth placed on the control areas, the hob
turns itself off, the displays light up and a
beep sounds. Clean the hob or remove the
object, then begin cooking again.

•Auto-Stop system

If you forget cooking is in progress, after a
predefined time, this safety function will auto­matically turn off your hob (from 1 to 10 hours
depending on the power setting). “

AAS

S

” dis­plays and a beep sounds after about 2 min­utes. Press on the main selector to delete this
information. A beep will confirm your setting.

• “Small Items” safety

If you place a small object on the area (a ring,
a fork, etc), the hob will detect it and not deliv­er any power. The power display flashes.

Note:

However, several small objects at the same
time on a zone could be identified as cook­ware. In that case, power will be delivered by
the hob.

Do not place any utensils (spoons,

forks, covers, etc) on the cooking
zone being used. They will heat up in the
same way as cookware:
Risk of combustion.

•For users with heart pacemakers and active implants.

The functioning of the hob conforms to current electromagnetic interference standards and thus
is in total compliance with legal requirements (89/336/EEC directives).
In order to avoid interference between your cooking hob and a pacemaker, your pacemaker
must be designed and programmed in compliance with the regulations that apply to it.
As we can guarantee the compliance only of our own products, we strongly recommend that
you refer to the maker of your device or to your doctor to avoid possible incompatibilities.

As shown in this logo, the materials used to package this appliance are not recycla­ble. Recycle them and play a role in protecting the environment by depositing them
in municipal containers provided for this purpose.
Recycling of the appliances organised by your manufacturer will thus be undertaken
in optimum conditions, in accordance with European directive 2002/96/CE relating
to electrical and electronic equipment waste. Contact your local authority or retailer
for how to have used appliances collected or collection points.

11

EN

3 / MAINTAINING YOUR APPLIANCE

Preserve your appliance

The vitroceramic glass surface is highly
resistant, but not unbreakable. Here are some
recommendations for increasing its lifetime:

- Avoid banging or clattering the cookware.

- Avoid putting heating covers on the hob. A
suction effect may damage the vitroceramic
surface.

- Do not use cookware with bottoms that are
rough or dented.

- Do not use your cooking hob as a work sur­face.

- Never use aluminium foil or paper or alu­minium scrubber to clean it. The aluminium
melts and damages the top.

- Never use a steam cleaner to clean your
hob.

Maintaining your appliance

- Never directly reheat a tin can. It will have a
risk of exploding.

Aesthetic faults, as a result of mistreatment of
your hob and which do not entail a lack of
function, are not covered by our guarantee.

And for the safety of your kitchen, do not
place cleaning items or inflammable objects
or products in the kitchen furniture under­neath your cooking hob.

TYPES OF STAINS/SPOTS

Light.

Accumulation of baked-on
stains/dirt.
Sugar spills, melted plas­tics.

Rings and hard water
residue.

Shiny metal colourings.
Weekly maintenance.

WHAT TO DO?

Thoroughly moisten the zone to be
cleaned with hot water, then wipe off.

Thoroughly moisten the zone to be
cleaned with hot water. Use a scraper for
glass to remove the large bits, follow with
the rough side of a disinfectant sponge,
and then wipe off.

Apply warm white vinegar to the stain, let
stand, then wipe with a soft cloth.

Apply a cleaning agent for vitroceramic
glass (preferable one with silicon for its
protective properties) to the surface.

USE

Cleaning sponges

Cleaning sponges
Scraper for glass.

White vinegar.

Special vitroceram­ic glass product.

cream

cleaning sponge

special for delicate crockery

abrasive sponge

powder

12

EN

4 / SPECIAL MESSAGES, DIFFICULTIES

The hob does not operate and
the indicator lights on the con­trol panel do not light up.

The hob is not working and
another message is displayed.

The hob does not function, the
information is displayed.

The machine is not connected to
the power source. The power
source or connection is defective.

The electronic board is func­tioning poorly.

The hob is locked

Inspect the electrical cir­cuit breaker and fuses.

Call the After-Sales
Service Department.

See chapter on using the
child safety system

•On switching on

YOU OBSERVE THAT: POSSIBLE CAUSES:

WHAT SHOULD YOU DO?

POSSIBLE CAUSES:

WHAT SHOULD YOU DO?

A special lamp appears.

Your installation blows a fuse.

Only one side works.

The hob produces an odour dur­ing the first cooking sessions.

Working normally.

The electrical connection of
your hob is incorrect.

New appliance.

Nothing, the light disappears
after 30 seconds.

Check that it is set up
properly.
See the “Electrical
Connection” section.

Nothing. The smell will dis­appear after several uses.

•On first use

•While in use

YOU OBSERVE THAT: POSSIBLE CAUSES: WHAT SHOULD YOU DO?

The hob has stopped operating and is
beeping approximately every 10 sec­onds and a or F7 is displayed.

There was an overflow or an
object is in contact with the
control panel.

Clean the hob or remove the
object, then begin cooking
again.

A series of small or F7 is dis­played.

The electronic boards heated
up.

See “Inserting” section.

Af

ter turning on a heating zone, the

indicat

or lights on the control panel

continue to flash.

The cookw

are used is not suit-

able f

or induction or is less
than 12 cm in diameter (10 cm
on a 16 cm area).

See section on cookw

are for

induction.

The saucepans make noise during
cooking.
Your hob makes a clicking sound dur­ing cooking.

This is normal with some
types of cookware. This is
caused by the transfer of
energy from the hob to the
cookware.

Nothing. There is no risk, nei­ther to your hob nor to your
cookware.

The fan continues to function a few min­utes after your hob is turned off.

Cooling of the electronic com­ponents.
W

or

king normally.

Nothing.

After turning on a heating zone, t

he

indicator lights on the contr

ol panel
remain steady but the cookware is not
heated.

The cookw

ar

e used is no

t

suit

able f

or use wit

h induc

-

tion.

See section on cookw

ar

e f

or

induction.

13

EN

5 / AFTER-SALES SERVICE

Any maintenance on your equipment should be undertaken by:

- either your dealer,

- or another qualified mechanic who is an authorized agent for the brand appliances.
When making an appointment, state the full reference of your equipment (model, type and serial
number). This information appears on the manufacturer's nameplate attached to your equipment.

For UK after sales service information please contact:-

www.dedietrich.co.uk

De Dietrich UK office – tel: [phone]

In case of breakage, cracks or even light fissures in the vitroceramic glass, take out
the fuses or turn off the circuit breaker for your hob to avoid the risk of electrical
shock.

Contact the After-Sales Service Department.

14

DE DIETRICH COOKING PRODUCT

WARRANTY

1. Subject to the “Statement of Standard
W

arranty Conditions” this product is

covered by the following Warranty.

T

WO (2) YEARS WARRANTY from
date of purchase, covering all parts
and labour.

2. The appliance is warranted under normal
single family domestic installation and
use, as set out in the instruction manual,
against manufacturing defects for the
Warranty periods shown above.

3. Should service be required under this
Warranty, the purchaser should contact
an approved DE DIETRICH Service
Provider during their normal business
hours.

4. At no time does DE DIETRICH/MEA
have liability for any freight or
transportation costs or for any damage
during transit or for any consequence of
failure of this appliance outside of the
normal service area, unless such
limitation of liability is prohibited by
statute.

5. This Warranty excludes replacement of
parts required due to normal wear and
tear including light globes.

6. This Warranty only applies, provided the
appliance has been used in accordance
with the manufacturer’s instructions and
provided an accident, misuse, neglect or
abuse has not damaged the appliance.

7. None of the above Warranties purport to
exclude, restrict or modify either the
application or the exercise of a right
conferred by any applicable Statute.

8. Please complete the details below, which
should be retained for future reference
along with your proof of purchase:

Date of Purchase: ……………………………..

Model No: ……………………………………….

Serial No: ………………………………………..

MEA0702

STATEMENT OF STANDARD

W

ARRANTY CONDITIONS

1. The Warranty only applies provided that
the appliance has been used in
a

ccordance with the manufacturer’s
instructions and provided that the
appliance has not been damaged by an
accident, misuse, neglect or abuse of any
person other than the manufacturer or
DE DIETRICH/Major Electrical
Appliances (“MEA”) or from faulty
installation, mis-adjustment or tampering
by unauthorised persons.

2. When a service inspection reveals the
alleged fault or faults are caused by
incorrect operation, contrary to the
instruction manual, and otherwise the
appliance is in good order and working
condition, the purchaser shall be liable for
aservicefeechargedbyDE
DIETRICH/MEA or one of its’ Service
Providers.

3. If the appliance is used in Commercial
Applications or for Rental purposes, a
separate warranty of Twelve (12) months
covering all parts with Three (3) months
on the labour will apply.

4. Subject to the provisions of any
applicable statute this Warranty applies
to the original retail purchaser only and is
not transferable.

5. Subject to the provisions of any
applicable statute, at no time does DE
DIETRICH/MEA have liability for freight,
transport or travel costs outside normal
service areas.

6. None of the above Warranties purport to
exclude, restrict or modify either the
application or the exercise of a right
conferred by any applicable statute.

7. Subject to any Warranties implied by
statute, at no time will DE
DIETRICH/MEA or its’ Service Providers
be liable for any economic loss
consequent upon the failure of the
appliance.

8. This Warranty is only valid for major
appliances imported and distributed by
DE DIETRICH/MEA, purchased and used
in Australia.

FFaaggoorrBBrraannddtt SSAASS,, MMaannaaggeemmeenntt ccoommppaannyy –– SSAASS:: ssoocciiaall ccaappiittaall ooff 2200,,000000,,000000 eeuurrooss RRCCSS NNaanntteerrrree 444400330033119966.

.

CZ5700375 /00 - 04/10