FR GUIDE D'UTILISATION
DE BETRIEBSANLEITUNG
EN GUIDE TO INSTALLATION
ES MANUAL DE UTILIZACIÓN
IT MANUALE D'USO
NL GEBRUIKSAANWIJZING
PT GUIA DE UTILIZAÇÃO
Hotte décor
Dekor-Dunstabzugshaube
Decorative Hood
Campana extractora decorativa
Cappa arredamento
Designafzuigkap
Exaustor decorativo
99642621_A_ML.qxp 14/06/2007 13:31 Page 1
44
FR 02
DE 23
EN 44
ES 65
IT 86
NL 107
PT
128
As part of our commitment to constantly improving our products, we reserve the right to make
changes to them based on technical advances to their technical and functional features and
appearance.
Warning:
Before installing and using your appliance, please carefully read this Guide to
Installation and Use, which will allow you to quickly familiarise yourself with its operation.
Dear Customer,
You have just acquired a
DDEE DDIIEETTRRIICCHH
hood and we would like to thank you.
Our research teams have created this new generation of appliances for you.
Their quality, design, features and technological advances make them
exceptional products, and reveal our unique know-how.
Your new
DDEE DDIIEETTRRIICCHH
hood will blend harmoniously into your kitchen and
will perfectly combine extraction performance and ease of use. We wanted
to offer you a product of excellence.
In the
DDEE DDIIEETTRRIICCHH
product line, you will also find a wide range of ovens,
microwaves, hobs, cookers, dishwashers and fridges that you can
coordinate with your new
DDEE DDIIEETTRRIICCHH
hood.
Of course, in an ongoing effort to best satisfy your demands with regard to
our products, our after-sales service department is at your disposal and
ready to listen in order to respond to all of your questions and suggestions
(contact information at the end of this booklet).
Visit our website
wwwwww..ddeeddiieettrriicchh--eelleeccttrroommeennaaggeerr..ccoomm
, where you will find our
latest innovations as well as useful and complementary information.
DDEE DDIIEETTRRIICCHH
SSeettttiinngg NNeeww VVaalluueess
99642621_A_ML.qxp 14/06/2007 13:33 Page 44
45
TABLE OF CONTENTS EN
1 / NOTICES TO THE USER
• Safety recommendations ____________________________________ 46
• Environmental protection
____________________________________
47
• Description of your appliance
________________________________
48
2 / INSTALLING YOUR APPLIANCE
••
Using the evacuation version
_________________________________
49
••
Using the recycling version
__________________________________
49
••
Electrical connection
_______________________________________
50
••
Assembling the hood
_______________________________________
51
••
Assembling the ventilation shaft
º Outdoor evacuation __________________________________ 52
º Recycling __________________________________________ 53
3 / USING YOUR APPLIANCE
••
Description of the controls
__________________________________
54
••
Starting the hood
__________________________________________
55
••
Stopping the hood
_________________________________________
55
••
Changing the speed
________________________________________
55
••
Delayed stop
______________________________________________
56
••
Light
_____________________________________________________
56
••
Locking the control panel
___________________________________
56
••
Recirculation mode
_________________________________________
57
••
Extraction mode ___________________________________________ 58
••
Saturated filter cartridge ____________________________________ 59
••
Saturated carbon filter ______________________________________ 59
••
Auto stop fan______________________________________________ 59
••
Auto stop lighting
__________________________________________
59
4 / CARING FOR AND CLEANING YOUR APPLIANCE
••
Cleaning the filter cartridges
_________________________________
60
••
Changing the carbon filter ___________________________________ 60
••
Cleaning the outer surfaces__________________________________ 61
••
Changing the light bulb
_____________________________________
61
••
Caring for your appliance
____________________________________
62
5 / TROUBLESHOOTING __________________________________________ 63
6 / AFTER-SALES SERVICE________________________________________ 64
99642621_A_ML.qxp 14/06/2007 13:33 Page 45
46
1 / NOTICES TO THE USEREN
SAFETY RECOMMENDATIONS
——
This oven was designed for use by private
persons in their homes.
——
This appliance is to be used by adults. Make
sure that children do not touch it and that
they do not treat it as a toy. Make sure that
they do not touch the appliance’s control
panel.
——
When you receive the appliance, unpack it
or have it unpacked immediately. Give it an
overall inspection. Make note of any concerns
or reservations on the delivery slip and make
sure to keep a copy of this form.
——
Your appliance is intended for standard
household use. Do not use it for commercial
or industrial purposes or for any other
purpose than that for which it was designed.
——
Do not modify or attempt to modify any of
the characteristics of this appliance. This
would be dangerous to your safety.
——
Repairs must only be performed by an
approved specialist.
——
Always unplug the hood before cleaning it
or performing other maintenance work.
——
Provide adequate ventilation for the room in
the case of simultaneous use of the hood and
other appliances powered by an energy
source other than electricity. This will prevent
the hood from aspirating the combustion
gases.
——
You should never “flambé” dishes under the
hood or operate gas rings under the hood
without placing cookware on them (the
flames sucked up into the hood can damage
the appliance).
——
When frying food under the appliance, you
must carefully monitor the preparation at all
times. Oils and grease brought to very high
temperatures can catch fire.
——
Respect the recommended frequency of
cleanings and filter replacements. The
accumulation of grease deposits may cause a
fire.
——
The hood should never be used over a
combustible fuel burning stove (wood, coal,
etc.).
——
Never use steam or high-pressure devices
to clean your appliance (requirement imposed
by electrical safety concerns).
——
With a view to constantly improving our
products, we reserve the right to modify their
technical, functional or aesthetic
characteristics, making any changes to their
features considered necessary or desirable in
view of technical progress.
——
In order to easily locate the reference
information for your appliance, we
recommend that you note these data on the
“After-Sales Service Department and
Customer Relations” page. (This page also
explains to you where to find this information
on your appliance.)
••
Warning
Keep this user guide with your
appliance. If the appliance is ever sold or
transferred to another person, ensure that
the new owner receives the user guide.
Please become familiar with these
recommendations before installing and
using your oven. They were written for your
safety and the safety of others.
This appliance is not intended to be used
by persons (including children) with
reduced physical, sensory or mental
abilities, or persons lacking experience or
awareness unless using it with the help of a
person responsible for their safety, or under
supervision and with prior instruction in its
use.
Warning
In the case of a kitchen heated by a
device connected to a ventilation shaft
(a stove, for example) the hood should be
installed in the “recycling” configuration. Do
not use the hood without metal filtres.
Suitable ventilation should be provided in
the room when the hood is used at the
same time as appliances operated by gas
or another combustible fuel. You should
install a CO (carbon monoxide) detector in
your room to warn of any danger of toxic
gas. This warning does not apply to
appliances which only recirculate air within
the room.
99642621_A_ML.qxp 14/06/2007 13:33 Page 46
47
1 / NOTICES TO THE USER EN
Warning
Installation should only be performed by installers and qualified technicians.
Warning
Before using the filter cartridge for the first time, remove the protective film.
ENVIRONMENTAL PROTECTION
••
— This appliance's packaging material is recyclable. Help recycle it and protect the environment
by dropping it off in the municipal receptacles provided for this purpose.
— Your appliance also contains a great amount of recyclable material. It is marked with this label
to indicate the used appliances that should not be mixed with other waste. This way, the
appliance recycling organised by your manufacturer will be done under the best possible
conditions, in compliance with European Directive 2002/96/EC on Waste Electrical
and Electronic Equipment. Contact your town hall or your retailer for the used
appliance collection points closest to your home.
— We thank you doing your part to protect the environment.
99642621_A_ML.qxp 14/06/2007 13:33 Page 47
48
1 / NOTICES TO THE USEREN
••
DESCRIPTION OF YOUR APPLIANCE
Vents
Ventilation shaft
Top surface
Control panel
A
B
C
D
B
C
D
A
99642621_A_ML.qxp 14/06/2007 13:33 Page 48
1134 mm
678 mm
638 mm
114 mm
500 mm
360 mm
144 mm
900/1200 mm
49
2 / INSTALLING YOUR APPLIANCE EN
USING THE EVACUATION MODE
If you possess an outlet t
o the exter
ior
(fig. 1)
Your hood can be connected to this outlet using
a flue (minimum diameter 125 mm enamelled, or
made of aluminium, flexible or fireproof material).
If your flue is less than 125 mm in diameter,
yyoouu
mmuusstt uussee tthhee rreeccyycclliinngg ccoonnffiigguurraattiioonn..
••
USING THE RECYCLING MODE
If you do not possess an outlet to the exterior
(fig. 2)
All of our appliances can be used in recycling
mode.
In this case, you should add an active carbon
filter which will keep in odours.
(See Chapter 4: Changing the carbon filtre.)
••
- The appliance must be unplugged during installation or when any repairs or maintenance work
is being performed.
- Ensure that the network voltage corresponds to the voltage noted on the identification plate
located inside the hood.
- If the electrical installation at your residence requires any changes in order to hook up your
appliance, call upon a professional electrician.
- If the hood is being used in evacuation mode, do not connect the appliance to a combustion gas
exhaust duct (boiler, ventilation shaft, etc.) or to a CMV (controlled mechanical ventilation) system.
- Under no circumstances should the exhaust duct empty into the attic.
- Install the hood at a safe distance of at least 70 cm from an electric, gas or combined cooking
hob.
fig. 1
fig. 2
99642621_A_ML.qxp 14/06/2007 13:33 Page 49
125
150
50
2 / INSTALLING YOUR APPLIANCEEN
Warning
This appliance is delivered with a
H 05 VVF power cord that has three
0.75 mm
2
conductors (neutral, phase and
ground). It must be connected to the main
power supply (which should be a 220-240 V
single phase current) via a CEI 60083
standardised socket that should remain
accessible after installation, in keeping with
installation guidelines.
We cannot be held responsible for any
accident resulting from an inexistent,
defective or incorrect ground lead. The fuse
in your set-up must be 10 or 16 amperes. If
the power cable is damaged, call the aftersales service department in order to avoid
danger.
Warning
If the electrical installation at your
residence requires any changes in order to
hook up your appliance, call upon a
professional electrician.
Warning
If the hood displays any malfunctions,
unplug the appliance or remove the fuse
corresponding to the electrical socket
where your appliance is plugged in.
••
ELECTRICAL CONNECTION
During installation and maintenance
operations, the appliance must be unplugged
from the electrical grid; fuses must be cut off
or removed.
The electrical connections are made before
the appliance is installed in its housing.
Ensur
e that:
- the electrical installation has sufficient
voltage,
- the electrical wires are in good condition,
- the diameter of the wires complies with the
installation requirements.
99642621_A_ML.qxp 14/06/2007 13:34 Page 50
51
2 / INSTALLING YOUR APPLIANCE EN
Tip
Correct the height and the levelness
by moving the adjustment screws “G”, then
firmly press the hood by tightening the
screws “H”.
ASSEMBLING THE HOOD
Warning
The hood must be installed in
compliance with all applicable regulations
concerning the ventilation of premises. In
France these regulations are described in
DTU 61.1 from the CSTB. In particular, the
evacuated air should never be conveyed to a
duct used to evacuate smoke from
appliances that use gas or other combustible
fuels. Unused ducts may only be used after
approval from a competent specialist.
The minimum distance between the cooking
surface and the lowest part of the hood must be
70 cm. If the instructions for the hob installed
under the hood specify a distance of more than
70 cm, this requirement must be respected.
— Draw a horizontal line 70 cm minimum from
the cook top (A/fig.1).
— Draw a vertical line (B/fig. 1) on the wall that
is centred over the cook top and that extends
from the ceiling to the horizontal line drawn in
the previous step (A).
— Place the C template (fig. 1) on the wall,
superimposing the line that represents the
hood’s axis over vertical line B (fig. 1) drawn in
the previous step.
— Attach the ventilation shaft bracket F (fig. 1)
flush with the ceiling for support and position
the notches over axis B.
— Drill the six holes. Insert the six wall plugs.
— Screw in the two brackets E.
— Using the rectangular cut-outs, attach the
suction hood to the two brackets (fig. 2).
The size of these cut-outs allows you to adjust
the position to the right or left.
••
=
=
> 70 cm
x 2
fig. 1
B
C
D
E
A
F
B
fig. 2
G
H
99642621_A_ML.qxp 14/06/2007 13:34 Page 51
A
B
52
2 / INSTALLING YOUR APPLIANCEEN
=
=
ASSEMBLING THE VENTILATION
SHAFT
••
Outdoor evacuation
— Using the two screws (fig. 1), attach the metal
ventilation shaft bracket against the wall, flush
with the ceiling for support.
— Mount the back-flow valve near the motor
outlet (fig. 2). This back-flow valve makes it
possible to block the entry of air from the
outside.
— If a 125-mm flue is being installed, use the
adapter provided (fig. 3).
If the diameter of your exterior flue is less than
125 mm, you must connect your hood in the
recycling configuration.
— Slide the end of the flue over the motor outlet
(fig. 4).
— Prepare your telescoping ventilation shaft,
taking care not to block the vents (fig. 4).
Fit the ventilation shafts into one another as far
as they will go.
— Attach the upper portion of the ventilation
shaft (B/fig. 4 on the metal ventilation shaft
bracket (A/fig. 4) using the two screws (G/fig. 4).
— Adjust the length of the telescoping ventilation
shaft by bringing down the lower part and fitting
it into the top of the hood.
••
fig. 1
fig. 4
fig. 2 fig. 3
A
B
C
D
E
VVeennttiillaattiioonn sshhaafftt bbrraacckkeett
FFlluuee
AAddaappttoorr
BBaacckk--ffllooww vvaallvvee
MMoottoorr oouuttlleett
F
TTeelleessccooppiinngg vveennttiillaattiioonn sshhaafftt
VVeennttiillaattiioonn sshhaafftt hhoollddiinngg ssccrreeww
G
A
C
D
E
F
G
B
99642621_A_ML.qxp 14/06/2007 13:34 Page 52
53
2 / INSTALLING YOUR APPLIANCE EN
••
Recycling
— Remove the back-flow valve (fig. 1).
— Using the two screws (fig. 2), attach the plastic
smoke deflector against the wall, flush with the
ceiling. Be careful to centre the deflector in
relation to the vertical line drawn on the wall
(fig. 2).
— Slide one end of the flue over the deflector and
the other end over the motor outlet (fig. 3).
— Prepare your ventilation shaft, taking care to
face the vents upward so that they are visible
(B/fig. 3).
— Attach the upper portion of the ventilation
shaft (C/fig. 3) on the metal smoke deflector
(A/fig. 3) using the two screws (F/fig. 3).
— Adjust the length of the telescoping ventilation
shaft by bringing down the lower part and fitting
it into the top of the hood.
Tip
For optimal use of your appliance, we
recommend that you connect the hood to a
150-mm diameter flue (not delivered with the
appliance). Minimise the number of angles
and bends and the lengths of the flue. In the
event that the hood will be operated using
outdoor evacuation, you should ensure a
sufficient inflow of fresh air to avoid a
pressure deficiency in the room.
fig. 3
A
B
C
D
E
SSmmookkee ddeefflleeccttoorr
TTeelleessccooppiinngg vveennttiillaattiioonn sshhaafftt
FFlluuee
MMoottoorr bbrraacckkeett
VVeennttss
fig. 1
fig. 2
VVeennttiillaattiioonn sshhaafftt hhoollddiinngg ssccrreeww
F
A
B
D
E
F
C
99642621_A_ML.qxp 14/06/2007 13:34 Page 53
=
=
54
3 / USING YOUR APPLIANCEEN
••
DESCRIPTION OF THE CONTROLS
Tip
This Guide to Installation and Use is valid for several models. Minor differences in
details and fittings may emerge between your appliance and the descriptions provided.
On/Off-Speed 1
A
B
C
D
Speed 2
Speed 4
Speed 3
A B C
Boost
E
F
G
Delayed stop
Lighting
D E F G
99642621_A_ML.qxp 14/06/2007 13:34 Page 54
55
3 / USING YOUR APPLIANCE EN
STARTING THE HOOD
••
CHANGING THE SPEED
••
STOPPING THE HOOD
••
Pressing the button starts the hood at speed 1.
Pressing the button starts the hood at speed 2.
For speeds
- and , perform the same steps.
To stop the hood, press the button for 2 seconds. The lighted speed buttons go out.
After starting the hood, you can change the suction speed by pressing the appropriate button.
(Eg.: The hood is on speed
. Pressing
switches it to suction speed 4.
The button lights up).
99642621_A_ML.qxp 14/06/2007 13:34 Page 55
56
3 / USING YOUR APPLIANCEEN
DELAYED STOP
••
LOCKING THE CONTROL PANEL
••
LIGHT
••
When you finish cooking, you can select the button to stop your hood. This function allows
you to keep the fan on for 10 minutes at the selected speed.
To cancel the delayed stop, press the same button and the delayed stop is cancelled.
Pressing the button briefly turns on your hood’s halogen light.
To turn off the halogen light, press the button. Both the light and the button will go out.
When cleaning your hood, you can lock the control panel by pressing the button for
5 seconds. The button stays lit.
To unlock the control panel, do the same thing. The button goes out.
99642621_A_ML.qxp 14/06/2007 13:34 Page 56
57
3 / USING YOUR APPLIANCE EN
RECIRCULATION MODE
••
If your hood is in recirculation mode and you want to use carbon filters: When using them you
can configure the hood in recirculation mode.
Keep your finger pressed at the same time on and . The buttons light up.
To configure it for recirculation mode, press to see the and
buttons light up.
Confirm the configuration by pressing . The indicators go out.
99642621_A_ML.qxp 14/06/2007 13:34 Page 57
58
3 / USING YOUR APPLIANCEEN
EXTRACTION MODE
••
If your hood is connected to an external outlet, you can configure it for extraction mode:
Press and simultaneously. The buttons light up.
When and are lit: your hood is configured for EXTRACTION.
Press to confirm.
When and are lit: press .
The and buttons light up. Confirm by pressing .
99642621_A_ML.qxp 14/06/2007 13:34 Page 58
59
3 / USING YOUR APPLIANCE EN
SATURATED CARBON FILTER
••
When your hood is in recirculation mode and the indicator is lit, it means you need to
change the carbon filter (we recommend that you replace the filters every 6 months).
To turn off the indicator , press the button. The indicator goes out.
AUTO STOP FAN
••
AUTO STOP LIGHTING
••
If you forget to turn off your hood, it will stop after nine hours of use. The hood switches to OFF
mode.
If your forget to turn off the light, it will go out after nine hours of use.
SATURATED FILTER CARTRIDGE
••
When the indicator flashes, it means the filter cartridges must be cleaned (see chapter
"Cleaning the filter cartridge”).
Press to unlock the “saturation” function. The indicator goes out.
99642621_A_ML.qxp 14/06/2007 13:34 Page 59
60
4 / CARING FOR AND CLEANING YOUR APPLIANCEEN
Warning
Always unplug the hood before cleaning it or performing other maintenance acts.
Regular maintenance of your appliance is a guarantee of proper functioning, good
performance and durability.
Warning
Failure to respect the guidelines for cleaning the appliance and filters may cause fires.
Please carefully adhere to the maintenance recommendations.
fig. 3
CLEANING THE FILTER
CARTRIDGES
They must be cleaned after approximately
30 hours of use or at least once a month.
These filtres can be cleaned in a vertical
position in your dishwasher.
Use a brush, hot water and mild detergent.
Rinse and dry them thoroughly before
returning them to the hood.
••
Dismantling the filtre cartridge
— Push the integrated handle on the filter
cartridge (fig.1).
— Tip the filter cartridge downward (fig.2).
••
CHANGING THE CARBON
FILTER
Replace it after approximately 120 hours of
use.
— Remove the filter cartridges (fig. 3).
— Place the carbon filter on the filter cartridge
on the inside of the hood.
— Pull the two fastener clips over each side of
the filter cartridge.
— Repeat these steps for all the filter
cartridges.
••
fig. 2
fig. 1
99642621_A_ML.qxp 14/06/2007 13:34 Page 60
61
4 / CARING FOR AND CLEANING YOUR APPLIANCE EN
CHANGING THE LIGHT BULB
••
MMooddeell wwiitthh hhaallooggeenn bbuullbb
— Remove the lighting port (fig. 1).
— Change the halogen bulb: G4-20W-12V.
— Replace the bulb by repeating these steps
in reverse order.
Warning
Before carrying out any work, the power supply to the hood must be turned off, either
by unplugging it or by using the circuit breaker switch.
fig. 1
CLEANING THE OUTER SURFACES
To clean the outside of your hood, use soapy water, but do not use abrasive creams or
scrubbing sponges.
••
99642621_A_ML.qxp 14/06/2007 13:34 Page 61
62
4 / CARING FOR AND CLEANING YOUR APPLIANCEEN
MAINTAINING YOUR APPLIANCE
••
Warning
Before carrying out any work, the power supply to the hood must be turned off, either
by unplugging it or by using the circuit breaker switch.
Top surface and
accessories
NNeevveerr uussee mmeettaall ssccoouurriinngg ppaaddss,,
aabbrraassiivvee pprroodduuccttss oorr eexxcceessssiivveellyy
ssttiiffff bbrruusshheess..
Filter cartridge
This filter captures fatty fumes
and dust. This component
plays an important role in
ensuring the effectiveness of
your hood.
In the event of tough stains,
use a non-abrasive cream, then
rinse with clean water.
Activated carbon filtre
To clean the body and the lighting
port, you should use only
commercial household cleaning
products diluted in water and
then rinse using clean water,
drying with a soft cloth.
This filter traps odours and must
be changed at least once a year
depending on your level of use.
You should order these filters
from your dealer (quoting the
reference shown on the
identification plate located
inside the hood) and note the
date the filter was changed.
MMAAIINNTTEENNAANNCCEE......
WWHHAATT TTOO DDOO??
PPRROODDUUCCTTSS//
AACCCCEESSSSOORRIIEESS TTOO UUSSEE
Use a commercial household
cleaning product then rinse
abundantly and dry. You may
place these parts in your
dishwasher in the vertical
position
((ddoo nnoott lleett tthheemm ccoommee
iinnttoo ccoonnttaacctt wwiitthh ddiirrttyy ddiisshheess oorr
ssiillvveerrwwaarree))..
To keep your appliance in good working order, we recommend that you use Clearit household
products.
Clearit offers you professional products and adapted solutions for the daily upkeep of your
household and kitchen appliances.
You may find them in conventional retail outlets, along with a complete line of by-products and
consumables.
PPrrooffeessssiioonnaall eexxppeerrttiissee ffoorr tthhee
ggeenneerraall ppuubblliicc
99642621_A_ML.qxp 14/06/2007 13:34 Page 62
63
5 / TROUBLESHOOTING
EN
Ensure that:
• The selected motor speed is sufficient for the
quantity of smoke and vapours to be cleared.
• The kitchen is sufficiently ventilated to allow
for fresh air intake.
• The carbon filter is not worn (hood operating
in recycling mode).
The hood is not
working...
The hood is not
operating effectively...
Ensure that:
• The power is not cut off.
• A speed has been selected.
The hood has stopped
working
Ensure that:
• The power is not cut off.
• The single-pole cut-off device was not
activated.
SSOOLLUUTTIIOONNSSSSYYMMPPTTOOMMSS
99642621_A_ML.qxp 14/06/2007 13:34 Page 63
64
6 / KUNDENDIENST
DE
Any maintenance on your equipment should be undertaken by:
- either your dealer,
- or another qualified mechanic who is an authorized agent for the brand appliances.
When making an appointment, state the full reference of your equipment (model, type and serial
number). This information appears on the manufacturer's nameplate attached to your equipment.
Eingriffe an Ihrem Gerät dürfen nur:
- von Ihrem Händler oder
- von einem sonstigen Fachmann und Vertragshändler der Marke durchgeführt werden.
Geben Sie bei der Meldung einer Störung die vollständige Typenbezeichnung Ihres Gerätes an
(Modell, Typ, Seriennummer). Diese Angaben finden Sie auf einem an Ihrem Gerät
angebrachten Schild.
6 / AFTER-SALES SERVICE
EN
6 / SERVICIO TÉCNICO
ES
Qualquer intervenção no seu aparelho deve ser realizada:
- quer pelo seu revendedor,
- quer por outro profissional qualificado autorizado pela marca.
Ao chamá-los, indique a referência completa do seu aparelho (modelo, tipo e número de série).
Estas informações figuram na placa de identificação fixada no aparelho.
Las intervenciones que requiera la máquina deberán ser efectuadas:
- por el revendedor,
- o por cualquier profesional cualificado depositario de la marca.
Al llamar, mencione la referencia completa de la máquina (modelo, tipo y número de serie).
Estos datos figuran en la placa de identificación situada en la máquina.
6 / SERVIZIO POST VENDITA
IT
6 / SERVICEDIENST
NL
Qualquer intervenção no seu aparelho deve ser realizada:
- quer pelo seu revendedor,
- quer por outro profissional qualificado autorizado pela marca.
Ao chamá-los, indique a referência completa do seu aparelho (modelo, tipo e número de série).
Estas informações figuram na placa de identificação fixada no aparelho.
De eventuele ingrepen in de machine moeten worden uitgevoerd :
- of door uw vakhandelaar,
- of door een andere gekwalificeerd technicus van dit merk.
Tijdens het telefoneren, dient u de complete referentie op te geven van uw machine (model,
type, serienummer). Deze informatie staat op het typeplaatje op de machine.
6 / SERVIÇO PÓS-VENDA
PT
99642621_A_ML.qxp 14/06/2007 13:34 Page 64
Loading...