Datavideo RMC-140 User Manual
2005/9/5
Ì¿´´§ñЮ»ª·»© Þ±¨ º±®
НЫуирр
ОУЭупмр
Û®®±®ÿ
ЛНЫО УЯТЛЯФ
ج¬°æññ©©©ò¼¿¬¿ª·¼»±ó¬»µò½±³
1
Warnings and Precautions
1. Read all of these warnings and save them for later reference.
2. Follow all warnings and instructions marked on this unit.
3. Unplug this unit from the wall outlet before cleaning. Do not
use liquid or aerosol cleaners. Use a damp cloth for cleaning.
4. Do not use this unit in or near water.
5. Do not place this unit on an unstable cart, stand, or table. The
unit may fall, causing serious damage.
6. Slots and openings on the cabinet top, back, and bottom are
provided for ventilation. To ensure safe and reliable operation
of this unit, and to protect it from overheating, do not block or
cover these openings. Do not place this unit on a bed, sofa,
rug, or similar surface, as the ventilation openings on the
bottom of the cabinet will be blocked. This unit should never be
placed near or over a heat register or radiator. This unit should
not be placed in a built-in installation unless proper ventilation
is provided.
7. This product should only be operated from the type of power
source indicated on the marking label of the AC adapter. If you
are not sure of the type of power available, consult your
Datavideo dealer or your local power company.
8. Do not allow anything to rest on the power cord. Do not locate
this unit where the power cord will be walked on, rolled over, or
otherwise stressed.
9. If an extension cord must be used with this unit, make sure that
the total of the ampere ratings on the products plugged into the
extension cord do not exceed the extension cords rating.
10. Make sure that the total amperes of all the units that are
plugged into a single wall outlet do not exceed 15 amperes.
2
11. Never push objects of any kind into this unit through the
cabinet ventilation slots, as they may touch dangerous voltage
points or short out parts that could result in risk of fire or
electric shock. Never spill liquid of any kind onto or into this
unit.
12. Except as specifically explained elsewhere in this manual, do
not attempt to service this product yourself. Opening or
removing covers that are marked Do Not Remove may
expose you to dangerous voltage points or other risks, and will
void your warranty. Refer all service issues to qualified service
personnel.
13. Unplug this product from the wall outlet and refer to qualified
service personnel under the following conditions:
a. When the power cord is damaged or frayed;
b. When liquid has spilled into the unit;
c. When the product has been exposed to rain or water;
d. When the product does not operate normally under
normal operating conditions. Adjust only those controls
that are covered by the operating instructions in this
manual; improper adjustment of other controls may
result in damage to the unit and may often require
extensive work by a qualified technician to restore the
unit to normal operation;
e. When the product has been dropped or the cabinet
has been damaged;
f. When the product exhibits a distinct change in
performance, indicating a need for service.
3
Table of Contents
WHATS IN THE BOX?.................................................................4
INTRODUCTION ...........................................................................5
FEATURE ......................................................................................6
INTERFACE ..................................................................................7
INSTALLATION.............................................................................8
Connect with SE-800 monitor outттттттттттттттттттттттттттттттттттттттттттттттттттт з
Connect thru TLM-404 тттттттттттттттттттттттттттттттттттттттттттттттттттттттттттттттттттттз
Connect RS-232 from SE-800 ттттттттттттттт тттттттттттттттттттттттттттттттттттттттттз
DISPLAY MODES .......................................................................10
SET UP MENU ............................................................................11
Color processor setting ттттттттттттттттттттттттттт тттттттттттттттттттттттттттттттттттттттпп
Video output settingттттттттттттттттттттттттттттттттттттттттттттттттттттттттттттттттттттттттпн
SAMPLE CONNECTION DIAGRAMS........................................14
RMC-140 and SE-800 application тттттттттттттттттттттттттттттттттттттттттттттттт пм
SPECIFICATION .........................................................................15
PRODUCT REGISTRATION.......................................................16
SERVICE & SUPPORT...............................................................17
4
Whats in the box?
1. RMC-140
2. User Manual
3. RS232 cable x 1
4. BNC 1.2m cable * 5
5. AC/DC Power Adapter
5
Introduction
Thank you for purchasing the RMC-140. This is an accessory
for the SE-800, and it can also be used for security camera
monitoring. In order to bring out the maximum performance of
this software, we recommend that you spend some time
reading this manual carefully.
Product Overview
The RMC-140 is especially designed for control by the SE 800,
via RS-232 port. In general, you can only select the main
output from one of four different video sources in the SE-800
by looking at the TLM-404 (4 x 4 LCD monitor) or other
similar products. You might not know which camera source
you want to switch to. With the RMC-140, everything becomes
easier and faster. You will be able to see next source preview
and next transition effect indicator showing on the same
monitor.
The RMC-140 also has an extra feature, you can select 4
different display modes, Quad, POP, PIP, or Next source
screen, plus tally light indicators on the same monitor.
Loading...