Datasheet N74F456N, N74F456D Datasheet (Philips)

Page 1
 
74F455*, 74F456 Buffers/drivers
Product specification Supersedes data of 1990 Nov 26 IC15 Data Handbook
1999 Jan 08
* Discontinued part. Please see the Discontinued Product List.
Page 2
Philips Semiconductors Product specification
74F455,* 74F456Buffers/Drivers
74F455 Octal Buffer/Driver with Parity, Inverting (3-State) 74F456 Octal Buffer/Driver with Parity, Non-Inverting (3-State)
2
1999 Jan 08 853–0371 20616
* Discontinued part. Please see the Discontinued Products List.
FEA TURES
High impedance NPN base inputs for reduced loading
(40µA in High and Low states)
74F456 combines 74F244 and 74F280A functions in one package
74F456 is a center pin version of the 74F656A
74F456 Non-Inverting
3-State outputs sink 64mA and source 15mA
24-pin plastic Slim DIP (300 mil) package
Broadside pinout simplifies PC board layout
DESCRIPTION
The 74F455 and 74F456 are octal buffers and line drivers with parity generation/checking designed to be employed as memory address drivers, clock drivers and bus-oriented transmitters/receivers. These parts include parity generator/checker to improve PC board density.
TYPE
TYPICAL
PROPAGATION
DELA Y
TYPICAL SUPPL Y CURRENT
(TOT AL)
74F455 6.5ns 64mA 74F456 7.5ns 64mA
ORDERING INFORMATION
DESCRIPTION
COMMERCIAL
RANGE
V
CC
= 5V ±10%,
T
amb
= 0°C to +70°C
PKG DWG #
24-pin plastic Slim
DIP (300mil)
N74456N SOT222-1
24-pin plastic SOL N74456D SOT137-1
INPUT AND OUTPUT LOADING AND FAN-OUT TABLE
PINS DESCRIPTION
74F(U.L.)
HIGH/LOW
LOAD VALUE
HIGH/LOW
D0–D7 Data inputs 2.0/0.066 40µA/40µA PI Parity input 1.0/0.033 20µA/20µA OE0, OE1 Output Enable inputs (active Low) 1.0/0.033 20µA/20µA ΣE, ΣO Parity outputs 750/106.7 15mA/64mA Q0–Q7 Data outputs (75F455) 750/106.7 15mA/64mA Q0–Q7 Data outputs (75F456) 750/106.7 15mA/64mA
NOTE: One (1.0) FAST Unit Load (U.L.) is defined as 20µA in the High state and 0.6mA in the Low state.
PIN CONFIGURATION – 74F455
24 23 22 21 20 19 18 17 16 15 14 1312
10 11
9
8
7
6
5
4
3
2
1
OE
0
OE
1
PI D0 D1
D2
D3 D4 D5 D6 D7 Q
7
Q
6
Q5
Q
4
Q3
Q
2
Q
1
Q
0
ΣE
ΣO
GND GND
V
CC
SF00969
PIN CONFIGURATION – 74F456
24 23 22 21 20 19 18 17 16 15 14 1312
10 11
9
8
7
6
5
4
3
2
1
OE
0
OE
1
PI D0 D1
D2
D3 D4 D5 D6 D7 Q7
Q6
Q5
Q4
Q3
Q2
Q1
Q0
ΣE
ΣO
GND GND
V
CC
SF00958
Page 3
Philips Semiconductors Product specification
74F455,* 74F456Buffers/Drivers
1999 Jan 08
3
* Discontinued part. Please see the Discontinued Products List.
LOGIC SYMBOL – 74F455
D0 D1 D2 D3 D4 D5 D6 D7
Q0 Q1 Q2 Q3 Q4 Q5 Q6 Q7
OE0
OE1
PI
ΣE
ΣO
45689101112
23
24
1
2
3
22 21 20 17 16 15 14 13
SF00959
VCC= Pin 7 GND = Pin 18, 19
LOGIC SYMBOL (IEEE/IEC) – 74F455
SF00961
4
6 8 9
3,5,6,7,8 9,10,11,12
1 2
2K
21 20 17
Z6
5
22
10 11 12
15 14
13
16
4
24
23
3
Z5
Z8
Z7
Z9
Z11
Z10
Z12
1
EN4
P3
3,5,6,7,8 9,10,11,12
[EVEN]
[ODD]
LOGIC SYMBOL – 74F456
D0 D1 D2 D3 D4 D5 D6 D7
Q0 Q1 Q2 Q3 Q4 Q5 Q6 Q7
OE0
OE1
PI
ΣE
ΣO
45689101112
23
24
1
2
3
22 21 20 17 16 15 14 13
SF00960
VCC= Pin 7 GND = Pin 18, 19
LOGIC SYMBOL (IEEE/IEC) – 74F456
SF00962
4
6 8 9
3,5,6,7,8 9,10,11,12
1 2
2K
21 20 17
Z6
5
22
10 11 12
15 14
13
16
4
24
23
3
Z5
Z8
Z7
Z9
Z11
Z10
Z12
1
EN4
P3
3,5,6,7,8 9,10,11,12
[EVEN]
[ODD]
FUNCTION T ABLE
INPUTS
OUTPUTS
74F455 74F456
OE0 OE1 Dn Qn Qn
L L L H L L L H L H H X X Z Z X H X Z Z
H = High voltage level L = Low voltage level Z = High impedance “off” state X = Don’t care
FUNCTION TABLE for PARITY OUTPUTS
INPUTS OUTPUTS
Number of inputs, High (PI, D0 - D7) ΣE ΣO Even - 0, 2, 4, 6, 8 H L Odd - 1, 3, 5, 7, 9 L H Any OEn = High Z Z
H = High voltage level L = Low voltage level Z = High impedance “off” state X = Don’t care
Page 4
Philips Semiconductors Product specification
74F455,* 74F456Buffers/Drivers
1999 Jan 08
4
* Discontinued part. Please see the Discontinued Products List.
LOGIC DIAGRAM for 74F455
3
4
5
6
8
9
10
11
12
1 2
22
21
20
17
16
15
14
13
23
24
Q
0
Q
1
Q
2
Q
3
Q
4
Q
5
Q
6
Q
7
ΣE
ΣO
D0
D1
D2
D3
D4
D5
D6
D7
OE
0
OE
1
PI
SF00963
VCC= Pin 7 GND = Pin 18, 19
Page 5
Philips Semiconductors Product specification
74F455,* 74F456Buffers/Drivers
1999 Jan 08
5
* Discontinued part. Please see the Discontinued Products List.
LOGIC DIAGRAM for 74F456
3
4
5
6
8
9
10
11
12
1 2
22
21
20
17
16
15
14
13
23
24
Q0
Q1
Q2
Q3
Q4
Q5
Q6
Q7
ΣE
ΣO
D0
D1
D2
D3
D4
D5
D6
D7
OE
0
OE
1
PI
SF00964
VCC= Pin 7 GND = Pin 18, 19
Page 6
Philips Semiconductors Product specification
74F455,* 74F456Buffers/Drivers
1999 Jan 08
6
* Discontinued part. Please see the Discontinued Products List.
ABSOLUTE MAXIMUM RATINGS
(Operation beyond the limits set forth in this table may impair the useful life of the device. Unless otherwise noted these limits are over the operating free-air temperature range.)
SYMBOL
PARAMETER RATING UNIT
V
CC
Supply voltage –0.5 to +7.0 V
V
IN
Input voltage –0.5 to +7.0 V
I
IN
Input current –30 to +5 mA
V
OUT
Voltage applied to output in High output state –0.5 to +V
CC
V
I
OUT
Current applied to output in Low output state 128 mA
T
amb
Operating free-air temperature range 0 to +70 °C
T
stg
Storage temperature range –65 to +150 °C
RECOMMENDED OPERATING CONDITIONS
LIMITS
SYMBOL
PARAMETER
MIN NOM MAX
UNIT
V
CC
Supply voltage 4.5 5.0 5.5 V
V
IH
High-level input voltage 2.0 V
V
IL
Low-level input voltage 0.8 V
I
IK
Input clamp current –18 mA
I
OH
High-level output current –15 mA
I
OL
Low-level output current 64 mA
T
amb
Operating free-air temperature range 0 70 °C
Page 7
Philips Semiconductors Product specification
74F455,* 74F456Buffers/Drivers
1999 Jan 08
7
* Discontinued part. Please see the Discontinued Products List.
DC ELECTRICAL CHARACTERISTICS
(Over recommended operating free-air temperature range unless otherwise noted.)
1
LIMITS
SYMBOL
PARAMETER
TEST CONDITIONS
1
MIN TYP
2
MAX
UNIT
±10%V
CC
2.4 V
V
OH
High-level output voltage
V
CC
=
MIN
,
VIL = MAX,
I
OH
=–
3mA
±5%V
CC
2.7 3.3 V
V
IH
=
MIN
IOH =–15mA ±10%V
CC
2.0 V
p
VCC = MIN,
±10%V
CC
0.55 V
VOLLow-level output voltage
V
IL
=
MAX
,
V
IH
= MIN
I
OL
=
MAX
±5%V
CC
0.42 0.55 V
V
IK
Input clamp voltage VCC = MIN, II = I
IK
–0.73 –1.2 V
I
I
Input current at maximum input voltage VCC = 0.0V, VI = 7.0V 100 µA
p
Dn
40 µA
IIHHigh-level input current
Pl, OEn
V
CC
=
MAX, V
I
= 2.
7V
20 µA
p
Dn
–40 µA
IILLow-level input current
Pl, OEn
V
CC
=
MAX, V
I
= 0.
5V
–20 µA
I
OZH
Off-state output current High-level voltage applied
VCC = MAX, VO = 2.7V 50 µA
I
OZL
Off-state output current Low-level voltage applied
VCC = MAX, VO = 0.5V –50 µA
I
OS
Short-circuit output current
3
VCC = MAX –100 –225 mA
I
CCH
50 80 mA
I
CC
Supply current (total)
I
CCL
VCC = MAX
78 110 mA
I
CCZ
63 90 mA
NOTES:
1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type.
2. All typical values are at V
CC
= 5V, T
amb
= 25°C.
3. Not more than one output should be shorted at a time. For testing I
OS
, the use of high-speed test apparatus and/or sample-and-hold techniques are preferable in order to minimize internal heating and more accurately reflect operational values. Otherwise, prolonged shorting of a High output may raise the chip temperature well above normal and thereby cause invalid readings in other parameter tests. In any sequence of parameter tests, I
OS
tests should be performed last.
AC ELECTRICAL CHARACTERISTICS
LIMITS
SYMBOL PARAMETER
TEST
CONDITION
VCC = +5V
T
amb
= +25°C
C
L
= 50pF, RL = 500
VCC = +5V ± 10%
T
amb
= 0°C to +70°C
C
L
= 50pF, RL = 500
UNIT
MIN TYP MAX MIN MAX
t
PLH
t
PHL
Propagation delay Dn to Qn
74F455 Waveform 2
2.0
1.0
4.5
2.0
6.5
4.0
2.0
1.0
7.5
4.5
ns
t
PLH
t
PHL
Propagation delay Dn to Qn
74F456 Waveform 1
2.0
2.5
4.5
5.0
6.5
7.0
2.0
2.5
7.0
7.5
ns
t
PLH
t
PHL
Propagation delay Dn to E, 
Waveform 1, 2
5.5
5.5
10.0
11.0
13.0
14.5
5.5
5.5
14.0
16.5
ns
t
PZH
t
PZL
Output Enable time to High or Low level
Waveform 3 Waveform 4
2.5
4.0
4.0
8.0
8.0
10.5
2.5
4.0
9.0
11.5
ns
t
PHZ
t
PLZ
Output Disable time from High or Low level
Waveform 3 Waveform 4
1.5
2.0
4.0
5.0
6.5
7.5
1.5
2.0
7.5
8.0
ns
Page 8
Philips Semiconductors Product specification
74F455,* 74F456Buffers/Drivers
1999 Jan 08
8
* Discontinued part. Please see the Discontinued Products List.
AC WAVEFORMS
For all waveforms, VM = 1.5V .
SF00965
V
M
V
M
V
M
V
M
t
PHL
t
PLH
Dn
E, O, Qn
Waveform 1. Propagation Delay, Non-Inverting Outputs
SF00966
V
M
V
M
V
M
V
M
t
PHL
t
PLH
Dn
E, O, Qn
Waveform 2. Propagation Delay, Inverting Outputs
V
M
V
M
V
M
t
PHZ
t
PZH
VOH -0.3V
0V
OE
n
SF00967
E, O, Qn, Qn
Waveform 3. 3-State Output Enable Time to High Level and
Output Disable Time from High Level
V
M
V
M
V
M
t
PLZ
t
PZL
VOL +0.3V
OEn
SF00968
E, O, Qn, Qn
Waveform 4. 3-State Output Enable Time to Low Level and
Output Disable Time from Low Level
TEST CIRCUIT AND WAVEFORMS
t
w
90%
V
M
10%
90%
V
M
10%
90%
V
M
10%
90%
V
M
10%
NEGATIVE PULSE
POSITIVE PULSE
t
w
AMP (V)
0V
0V
t
THL (tf
)
INPUT PULSE REQUIREMENTS
rep. rate
t
w
t
TLHtTHL
1MHz 500ns
2.5ns 2.5ns
Input Pulse Definition
V
CC
family
74F
D.U.T.
PULSE
GENERATOR
R
L
C
L
R
T
V
IN
V
OUT
Test Circuit for 3-State Outputs
DEFINITIONS:
R
L
= Load resistor;
see AC electrical characteristics for value.
C
L
= Load capacitance includes jig and probe capacitance;
see AC electrical characteristics for value.
R
T
= Termination resistance should be equal to Z
OUT
of
pulse generators.
t
THL (tf
)
t
TLH (tr
)
t
TLH (tr
)
AMP (V)
amplitude
3.0V
1.5V
V
M
R
L
7.0V
SF00777
TEST SWITCH
t
PLZ
closed
t
PZL
closed
All other open
SWITCH POSITION
Page 9
Philips Semiconductors Product specification
74F455*, 74F456Buffers/drivers
1999 Jan 08
9
* Discontinued part. Please see the Discontinued Product List.
DIP24: plastic dual in-line package; 24 leads (300 mil) SOT222-1
Page 10
Philips Semiconductors Product specification
74F455*, 74F456Buffers/drivers
1999 Jan 08
10
* Discontinued part. Please see the Discontinued Product List.
SO24: plastic small outline package; 24 leads; body width 7.5 mm SOT137-1
Page 11
Philips Semiconductors Product specification
74F455*, 74F456Buffers/drivers
1999 Jan 08
11
* Discontinued part. Please see the Discontinued Product List.
NOTES
Page 12
Philips Semiconductors Product specification
74F455*, 74F456Buffers/drivers
yyyy mmm dd
12
Definitions
Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For
detailed information see the relevant data sheet or data handbook. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one
or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification.
Disclaimers
Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can
reasonably be expected to result in personal injury . Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application.
Right to make changes — Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.
Philips Semiconductors 811 East Arques Avenue P.O. Box 3409 Sunnyvale, California 94088–3409 Telephone 800-234-7381
Copyright Philips Electronics North America Corporation 1998
All rights reserved. Printed in U.S.A.
print code Date of release: 10-98 Document order number: 9397-750-05128
 
Data sheet status
Objective specification
Preliminary specification
Product specification
Product status
Development
Qualification
Production
Definition
[1]
This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice.
This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make chages at any time without notice in order to improve design and supply the best possible product.
This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product.
Data sheet status
[1] Please consult the most recently issued datasheet before initiating or completing a design.
* Discontinued part. Please see the Discontinued Product List.
Loading...