Datasheet N74F399N Datasheet (Philips)

INTEGRATED CIRCUITS

74F398*, 74F399 Registers

* Discontinued part. Please see the Discontinued Product List.

Product specification Supersedes data of 1990 Apr 08 IC15 Data Handbook

 

1999 Jan 08

Philips Semiconductors Product specification

74F398*,74F399Registers

74F398 Quad 2-Port Register with True and Complementary Outputs 74F399 Quad 2-Port Register

FEATURES

•Select inputs from two data sources

•Fully positive edge-triggered

•Both True and Complementary outputs–74F398

DESCRIPTION

The 74F398 and 74F399 are the logical equivalent of a quad 2-input multiplexer feeding into four edge-triggered flip-flops. A common Select input determines which of two 4-bit words is accepted. The selected data enters the flip-flops on the rising edge of the clock.

The 74F399 is the 16-pin version of the 74F398, with only the true (Qn) outputs of the flip-flops available.

The 74F398 and 74F399 are high speed quad 2-port registers. They select 4 bits of data from either of two sources (Ports) under control of a common select input (S). The selected data is transferred to a 4-bit output register synchronous with the Low-to-High transition of the Clock input (CP). The 4-bit D-type output register is fully edge-triggered. The Data inputs (I0n, I1n) and Select input (S) must be stable only a setup time prior to and hold time after the Low-to-High transition of the Clock input for predictable operation. The 74F398 has both Q and Q

TYPE

TYPICAL f

74F398 120MHz 25mA 74F399 120MHz 22mA

ORDERING INFORMATION

DESCRIPTION

16-pin plastic DIP N74F399N SOT38-4

16-pin plastic SO N74F399D SOT109-1

COMMERCIAL RANGE

outputs.

TYPICAL SUPPL Y CURRENT

MAX

VCC = 5V ±10%,

T

= 0°C to +70°C

amb

(TOTAL)

PKG DWG #

PIN CONFIGURATION – 74F398

S

1

Qa

2

a

Q

3

I0a

4

I1a

5

I1b

6

I0b

PIN CONFIGURATION – 74F399

S

1

Qa

2

I0a

3

I1a

4

I1b

5

I0b

20 19 18 17 16 15 147

138QbQc 129Qb Qc 1110GND CP

SF00947

16 15 14 13 12 116 107Qb Qc

98GND CP

SF00951

V Qd Q

I0d I1d I1c I0c

V Qd

I0d I1d I1c I0c

CC

d

CC

INPUT AND OUTPUT LOADING AND FAN-OUT TABLE

PINS DESCRIPTION

74F (U.L.)

HIGH/LOW

I0a, I0b, I0c, I0d Data inputs from source 0 1.0/1.0 20µA/0.6mA I1a, I1b, I1c, I1d Data inputs from source 1 1.0/1.0 20µA/0.6mA

S Common Select input 1.0/1.0 20µA/0.6mA

CP Clock input (active rising edge) 1.0/1.0 20µA/0.6mA Qa, Qb, Qc, Qd Register true outputs 50/33 1.0mA/20mA Qa, Qb, Qc, Qd Register complementary outputs (74F398) 50/33 1.0mA/20mA

NOTE:

One (1.0) FAST unit load is defined as: 20µA in the High state and 0.6mA in the Low state.

* Discontinued part. Please see the Discontinued Products List..

1999 Jan 08 853–0028 20616

2

LOAD VALUE

HIGH/LOW

Philips Semiconductors Product specification

74F398*,74F399Registers

LOGIC SYMBOL – 74F398

57614

1

11

VCC= Pin 20 GND = Pin 10

4

I1a I0b I1b I0c

I0a

S CP

Qa Qa Qb Qb

2398

15 17 16

I1c I0d I1d

Qc Qc Qd Qd

12 13 19 18

IEC/IEEE SYMBOL (IEEE/IEC) – 74F398

G1

C2

, 2D

1 1, 2D

MUX

2 3 9

8 12 13 19 18

1 11

4 5

7

6 14 15 17 16

SF00948

LOGIC SYMBOL – 74F399

46511

1 9

VCC= Pin 16 GND = Pin 8

3

I0a

S CP

I1a I0b I1b I0c

Qa Qb

27

12 14 13

I1c I0d I1d

Qc Qd

10 15

IEC/IEEE SYMBOL (IEEE/IEC) – 74F399

G1

C1

1

, 2D

1, 2D

MUX

1 9

3 4

6

5 11 12 14 13

SF00952

2

7

10

15

SF00949

FUNCTION TABLE

INPUTS OUTPUTS

CP S I0n I1n Qn Qn (74F398 only)



H = High voltage level h = High voltage level one setup time prior to the High-to-Low

L = Low voltage level l = Low voltage level one setup time prior to the High-to-Low

X = Don’t care  = Low-to-High clock transition

* Discontinued part. Please see the Discontinued Products List..

1999 Jan 08

l l X L H

l h X H L h X l L H h X h H L

clock transition

SF00953

3

Philips Semiconductors Product specification

74F398*,74F399Registers

LOGIC DIAGRAM – 74F398

1

S

4

I0a

2

I1a

I0b

I1b

I0c

I1c

5

7

6

14

15

D

CP

D

CP

D

CP

Qa

3

Q

a

9

Qb

8

Q

b

12

Qc

13

c

Q

VCC = Pin 20 GND = Pin 10

LOGIC DIAGRAM – 74F399

I0a

I1a

I0b

I1b

I0c

I1c

I0d

I1d

CP

17

19

18

SF00950

2

Qa

7

Qb

10

Qc

Qd

Q

d

16

11

1

S

3

4

6

5

11

12

D

CP

D

CP

D

CP

D

14

I0d

13

I1d

9

VCC = Pin 16 GND = Pin 8

CP

* Discontinued part. Please see the Discontinued Products List..

1999 Jan 08

CP

15

D

CP

Qd

SF00954

4

Philips Semiconductors Product specification

SYMBOL

PARAMETER

UNIT

NO TAG

VOHHigh-level output voltage

CC

,

IL

,

VOLLow-level output voltage

CC

,

IL

,

ICCSupply current (total)

V

MAX

74F398*,74F399Registers

ABSOLUTE MAXIMUM RATINGS

(Operation beyond the limits set forth in this table may impair the useful life of the device. Unless otherwise noted these limits are over the operating free-air temperature range.)

SYMBOL

V V I

IN

V I

OUT

T

amb

T

CC IN

OUT

STG

Supply voltage –0.5 to +7.0 V Input voltage –0.5 to +7.0 V Input current –30 to +5 mA Voltage applied to output in High output state –0.5 to +V Current applied to output in Low output state 40 mA Operating free-air temperature range 0 to +70 °C Storage temperature range –65 to +150 °C

RECOMMENDED OPERATING CONDITIONS

V V V I I I T

CC IH

IL IK OH OL

amb

Supply voltage 4.5 5.0 5.5 V High-level input voltage 2.0 V Low-level input voltage 0.8 V Input clamp current –18 mA High-level output current –1 mA Low-level output current 20 mA Operating free-air temperature range 0 70 °C

PARAMETER RATING UNIT

CC

V

LIMITS

MIN NOM MAX

DC ELECTRICAL CHARACTERISTICS

(Over recommended operating free-air temperature range unless otherwise noted.)

LIMITS

SYMBOL PARAMETER TEST CONDITIONS

p

V

IK

I

IH

I

IL

I

OS

Input clamp voltage VCC = MIN, II = I Input current at maximum input voltage VCC = MAX, VI = 7.0V 100 µA High-level input current VCC = MAX, VI = 2.7V 20 µA Low-level input current VCC = MAX, VI = 0.5V –0.6 mA Short-circuit output current

pp

NO TAG

74F398 74F399

VCC = MIN, VIL = MAX, V

IH

= MIN, I

OH

= MAX

VCC = MIN, VIL = MAX, VIH = MIN, I

OL

= MAX

IK

VCC = MAX –60 –150 mA

=

CC

±10%V

±5%V

±10%V

±5%V

CC

MIN

2.5 V

CC

2.7 3.4 V

CC

TYP

NO TAG

MAX

0.30 0.50 V

–0.73 –1.2 V

25 38 mA 22 34 mA

NOTES:

1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type.

2. All typical values are at V

3. Not more than one output should be shorted at a time. For testing I

= 5V, T

CC

techniques are preferable in order to minimize internal heating and more accurately reflect operational values. Otherwise, prolonged shorting

amb

= 25°C.

, the use of high-speed test apparatus and/or sample-and-hold

OS

of a High output may raise the chip temperature well above normal and thereby cause invalid readings in other parameter tests. In any sequence of parameter tests, I

tests should be performed last.

OS

UNIT

* Discontinued part. Please see the Discontinued Products List..

1999 Jan 08

5

Philips Semiconductors Product specification

74F398*,74F399Registers

AC ELECTRICAL CHARACTERISTICS

LIMITS

SYMBOL PARAMETER

f

MAX

t

PLH

t

PHL

Maximum clock frequency Waveform 1 100 120 90 MHz

Propagation delay CP to Qn or Qn

AC SETUP REQUIREMENTS

SYMBOL PARAMETER

ts(H) ts(L)

th(H) th(L)

ts(H) ts(L)

th(H) th(L)

tW(H) tW(L)

Setup time, High or Low I0n, I1n to CP

Hold time, High or Low I0n, I1n to CP

Setup time, High or Low S to CP

Hold time, High or Low S to CP

CP Pulse width High or Low

TEST

CONDITION

Waveform 1

TEST

CONDITION

Waveform 2

Waveform 1

VCC = +5V

T

= +25°C

amb

C

= 50pF, RL = 500Ω

L

MIN TYP MAX MIN MAX

3.0

5.7

6.5

7.5

8.5

VCC = +5V

T

= +25°C

amb

C

= 50pF, RL = 500Ω

L

MIN TYP MAX MIN MAX

3.0

1.0

7.5

7.5 0

0

4.0

6.0

T

C

LIMITS

T

C

VCC = +5V ± 10%

= 0°C to +70°C

amb

= 50pF, RL = 500Ω

L

3.0

8.5

9.0

VCC = +5V ± 10%

= 0°C to +70°C

amb

= 50pF, RL = 500Ω

L

3.0

1.0

8.5

8.5 0

0

4.0

6.0

UNIT

ns

UNIT

ns

AC WAVEFORMS

For all waveforms, VM = 1.5V. The shaded areas indicate when the input is permitted to change for predictable output performance.

1/f

MAX

Qn, Q

CP

V

M

tw(H)

t

PLH

n

tw(L)

V

M

V

M

t

PHL

V

Waveform 1. Propagation Delay, Clock Input to Output,

Clock Pulse Width, and Maximum Clock Frequency

I0n, I1n, S

CP

M

Waveform 2. Data and Select Setup and Hold Times

SF00955

V ts(H) th(H) ts(L) th(L)

V

M

V

M

V

M

V

M

SF00956

* Discontinued part. Please see the Discontinued Products List..

1999 Jan 08

6

Philips Semiconductors Product specification

74F398*,74F399Registers

TEST CIRCUIT AND WAVEFORMS

V

CC

PULSE

GENERATOR

V

IN

R

T

D.U.T.

V

OUT

R

C

L

Test Circuit for Totem-Pole Outputs

DEFINITIONS:

= Load resistor;

R

L

see AC ELECTRICAL CHARACTERISTICS for value.

= Load capacitance includes jig and probe capacitance;

C

L

see AC ELECTRICAL CHARACTERISTICS for value.

R

= Termination resistance should be equal to Z

T

pulse generators.

OUT

of

NEGATIVE PULSE

POSITIVE PULSE

family

74F

90%

10%

amplitude

3.0V

t

w

V

M

10%

)

V

90%

M

t

THL (tf

t

TLH (tr

)

t

w

TLH (tr

THL (tf

10%

)

90%

V

M

V

Input Pulse Definition

INPUT PULSE REQUIREMENTS

V

M

1.5V

rep. rate

1MHz 500ns

t

w

90%

M

10%

t

TLHtTHL

2.5ns 2.5ns

AMP (V)

0V

AMP (V)

0V

SF00006

* Discontinued part. Please see the Discontinued Products List..

1999 Jan 08

7

Philips Semiconductors Product specification

74F398*, 74F399Registers

DIP16: plastic dual in-line package; 16 leads (300 mil) SOT38-4

* Discontinued part. Please see the Discontinued Product List.

1999 Jan 08

8

Philips Semiconductors Product specification

74F398*, 74F399Registers

SO16: plastic small outline package; 16 leads; body width 3.9 mm SOT109-1

* Discontinued part. Please see the Discontinued Product List.

1999 Jan 08

9

Philips Semiconductors Product specification

74F398*, 74F399Registers

Data sheet status

Objective specification

Preliminary specification

Product specification

Product status

Development

Qualification

Production

Definition

This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice.

This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make chages at any time without notice in order to improve design and supply the best possible product.

This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product.

[1]

[1] Please consult the most recently issued datasheet before initiating or completing a design.

Definitions

Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For

detailed information see the relevant data sheet or data handbook. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one

or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability.

Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification.

Disclaimers

Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can

reasonably be expected to result in personal injury . Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application.

Right to make changes — Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.

Philips Semiconductors 811 East Arques Avenue P.O. Box 3409 Sunnyvale, California 94088–3409 Telephone 800-234-7381

 Copyright Philips Electronics North America Corporation 1998

print code Date of release: 10-98 Document order number: 9397-750-05127

* Discontinued part. Please see the Discontinued Product List.

 

yyyy mmm dd

10