Page 1
1
www.clare.com
LBA120L
DS-LBA120L-R3
LBA120L is 250V, 170mA, 20Ω independent 1-Form-A
and 1-Form-B relays. It features low on-resistance combined with enhanced peak load current handling capabilities. Current limiting version is available (“L” suffix, see
specification for variations in performance).
• Telecommunications
• Telecom Switching
• Tip/Ring Circuits
• Modem Switching (Laptop, Notebook, Pocket Size)
• Hookswitch
• Dial Pulsing
• Ground Start
• Ringer Injection
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment-Patient/Equipment Isolation
• Security
• Aerospace
• Industrial Controls
• UL Recognized: File Number E76270
• CSA Certified: File Number LR 43639-10
• BSI Certified to:
• BS EN 60950:1992 (BS7002:1992)
Certificate #: 7344
• BS EN 41003:1993
Certificate #: 7344
• Small 8 Pin DIP Package
• Low Drive Power Requirements (TTL/CMOS
Compatible)
• No Moving Parts
• High Reliability
• Arc-Free With No Snubbing Circuits
• 3750V
RMS
Input/Output Isolation
• FCC Compatible
• VDE Compatible
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
• Current Limiting Surface Mount and Tape & Reel
Versions A vailable
Applications
Features
Description
Approvals
DUAL POLE OptoMOS®Relay
Ordering Information
Part # Description
LBA120L 8 Pin DIP
LBA120LS 8 Pin Surface Mount (50/Tube)
LBA120LSTR 8 Pin Surface Mount (1000/Reel)
LBA120L Units
Load Voltage 250 V
Load Current 170 mA
Max R
ON
20 Ω
Pin Configuration
Switching Characteristics of
Normally Closed (Form B) Devices
CONTROL
10ms
10%
90%
90%
+
+
T
ON
T
OFF
+
Switching Characteristics of
Normally Open (Form A) Devices
CONTROL
LOAD
10ms
10%
10%
90%
+
T
ON
T
OFF
+
+
1
2
3
4
8
7
6
5
LBA120L Pinout
+ Control - Normally Closed
– Control - Normally Closed
+ Control - Normally Open
– Control - Normally Open
Normally Closed Pole
Normally Open Pole
AC/DC Configuration
Page 2
www.clare.com
LBA120L
Rev. 3
Absolute Maximum Ratings are stress ratings. Stresses
in excess of these ratings can cause permanent damage
to the device. Functional operation of the device at these
or any other conditions beyond those indicated in the
operational sections of this data sheet is not implied.
Exposure of the device to the absolute maximum ratings
for an extended period may degrade the device and effect
its reliability.
Absolute Maximum Ratings (@ 25˚ C)
2
Parameter Min Typ Max Units
Input Power Dissipation - - 1501mW
Input Control Current - - 50 mA
Peak (10ms) - - 1 A
Reverse Input Voltage - - 5 V
Total Power Dissipation - - 8002mW
Isolation Voltage
Input to Output 3750 - - V
RMS
Operational Temperature -40 - +85 °C
Storage Temperature -40 - +125 °C
Soldering Temperature
DIP Package - - +260 °C
Surface Mount Package - - +220 °C
(10 Seconds Max.)
1
Derate Linearly 1.33 mw/˚C
2
Derate Linearly 6.67 mw/˚C
Electrical Characteristics
Parameter Conditions Symbol Min Typ Max Units
Output Characteristics @ 25°C
Load Voltage (Peak) - V
L
- - 250 V
Load Current*(Continuous)
AC/DC Configuration - I
L
- - 150 mA
Peak Load Current 10ms I
LPK
---mA
On-Resistance
AC/DC Configuration I
L
=170mA R
ON
-2125 Ω
Off-State Leakage Current V
L
=250V I
LEAK
--1µA
Switching Speeds
Turn-On I
F
=5mA, VL=10V T
ON
--5ms
Turn-Off I
F
=5mA, VL=10V T
OFF
--5ms
Output Capacitance 50V; f=1MHz C
OUT
-50- pF
Load Current Limiting Form A only I
CL
190 235 280 mA
Input Characteristics @ 25°C
Input Control Current I
L
=120mA I
F
5-50mA
Input Dropout Current - - 0.4 0.7 - mA
Input Voltage Drop I
F
=5mA V
F
0.9 1.2 1.4 V
Reverse Input Voltage - V
R
--5 V
Reverse Input Current VR=5V I
R
- - 10 µA
Input to Output Capacitance - C
I/O
-3- pF
Input to Output Isolation - V
I/O
3750 - - V
RMS
*NOTE: If both poles operate simultaneously load current must be derated so as not to exceed the package power dissipation value.
Page 3
LBA120L
www.clare.com
Rev. 3
PERFORMANCE DATA*
The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact
our application department.
3
LBA120L
Typical LED Forward Voltage Drop
(N=50 Ambient Temperature = 25°C)
IF = 5mADC
35
30
25
20
15
10
5
0
1.17 1.19 1.21 1.23 1.25
LED Forward Voltage Drop (V)
Device Count (N)
LBA120L - Form A
Typical On-Resistance Distribution
(N=50 Ambient Temperature = 25°C)
(Load Current = 170mADC)
35
30
25
20
15
10
5
0
14.0 14.8 15.614.4 15.2
On-Resistance (Ω)
Device Count (N)
LBA120L - Form B
Typical On-Resistance Distribution
(N=50 Ambient Temperature = 25°C)
(Load Current = 170mADC)
35
30
25
20
15
10
5
0
10.4 10.8 11.2 12.011.6 12.4
On-Resistance (Ω)
Device Count (N)
LBA120L - Form A
Typical Blocking Voltage Distribution
(N=50 Ambient Temperature = 25°C)
35
30
25
20
15
10
5
0
380 388 396384 392 400
Blocking Voltage (V)
Device Count (N)
LBA120L - Form B
Typical Blocking Voltage Distribution
(N=50 Ambient Temperature = 25°C)
35
30
25
20
15
10
5
0
291.25 293.75 296.25 298.75 301.25 303.75
Blocking Voltage (V)
Device Count (N)
LBA120L - Form A
Typical IF for Switch Operation
(N=50 Ambient Temperature = 25°C)
(Load Current = 170mADC
40
35
30
25
20
15
10
5
0
0.8 1.2 1.60.6 1.0 1.4 1.8
LED Current (mA)
Device Count (N)
)
LBA120L - Form B
Typical IF for Switch Operation
(N=50 Ambient Temperature = 25°C)
(Load Current = 170mADC)
0.63 0.81 1.17 1.530.99 1.35
LED Current (mA)
Device Count (N)
30
25
20
15
10
5
0
LBA120L - Form A
Typical IF for Switch Dropout
(N=50 Ambient Temperature = 25°C)
(Load Current = 170mADC)
0.5 0.9 1.30.3 0.7 1.1 1.5
LED Current (mA)
Device Count (N)
25
20
15
10
5
0
LBA120L - Form B
Typical IF for Switch Dropout
(N=50 Ambient Temperature = 25°C)
(Load Current = 170mADC)
35
25
20
15
10
5
0
0.63 0.99 1.350.45 0.81 1.17
LED Current (mA)
Device Count (N)
LBA120L - Form A
Typical Turn-On Time
(N=50 Ambient Temperature = 25°C)
(Load Current = 170mADC; IF = 5mADC)
0.23 0.41 0.59 0.770.680.500.32
Turn-On (ms)
Device Count (N)
30
25
20
15
10
5
0
LBA120L - Form B
Typical Turn-On Time
(N=50 Ambient Temperature = 25°C)
(Load Current = 170mADC; IF = 5mADC)
0.42 0.66 0.900.54 0.78
Turn-On (ms)
Device Count (N)
35
30
25
20
15
10
5
0
0.30
LBA120L - Form A
Typical Turn-Off Time
(N=50 Ambient Temperature = 25°C)
(Load Current = 170mADC; IF = 5mADC)
0.06 0.14 0.22 0.300.10 0.18 0.26
Turn-Off (ms)
Device Count (N)
35
30
25
20
15
10
5
0
Page 4
www.clare.com
4
LBA120L
Rev. 3
PERFORMANCE DATA*
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact
our application department.
LBA120L - Form B
Typical Turn-Off Time
(N=50 Ambient Temperature = 25°C)
(Load Current = 170mADC; IF = 5mADC)
0.875 1.375 1.8750.625 1.125 1.625
Turn-Off (ms)
Device Count (N)
35
30
25
20
15
10
5
0
LBA120L - Form B
Typical Load Current vs. Temperature
Temperature (°C)
Load Current (mA)
250
200
150
100
50
0
-40 -20 0 20 40 60 80 120100
5mA
LBA120L - Form A
Typical Load Current vs. Temperature
Temperature (°C)
Load Current (mA)
250
200
150
100
50
0
-40 -20 0 20 40 60 80 120100
20mA
10mA
5mA
LBA120L - Form A
Typical Leakage vs. Temperature
(Measured across Pins 4 & 6)
Temperature (°C)
Leakage (µA)
-40
0.18
0.16
0.14
0.12
0.10
0.08
0.06
-20 0 20 40 60 80 100
LBA120L - Form B
Typical Leakage vs. Temperature
(Measured across Pins 4 & 6)
Temperature (°C)
Leakage (µA)
-40
0.030
0.025
0.020
0.015
0.010
0.005
0
-20 0 20 40 60 80 100
LBA120L - Form A
Typical Blocking Voltage
vs. Temperature
Temperature (°C)
Blocking Voltage (V
RMS
)
-40
400
395
390
385
380
375
-20 0 20 40 60 80 100
LBA120L - Form B
Typical Blocking Voltage
vs. Temperature
Temperature (°C)
Blocking Voltage (V
RMS
)
-40
310
305
300
295
290
285
-20 0 20 40 60 80 100
LBA120L - Form A
Typical Turn-On vs. Temperature
(Load Current = 170mADC)
Temperature (°C)
Turn-On (ms)
-40
0.6
0.5
0.4
0.3
0.2
0.1
0
-20 0 20 40 60 80 100
5mA
10mA
20mA
LBA120L - Form B
Typical Turn-On vs. Temperature
(Load Current = 170mADC)
Temperature (°C)
Turn-On (ms)
-40
0.12
0.10
0.08
0.06
0.04
0.02
0
-20 0 20 40 60 80 100
5mA
LBA120L - Form A
Typical Turn-Off vs. Temperature
(Load Current = 170mADC)
Temperature (°C)
Turn-Off (ms)
-40
0.30
0.25
0.20
0.15
0.10
0.05
0
-20 0 20 40 60 80 100
5mA
LBA120L - Form B
Typical Turn-Off vs. Temperature
(Load Current = 170mADC)
Temperature (°C)
Turn-Off (ms)
-40
2.500
2.000
1.500
1.000
0.500
0
-20 0 20 40 60 80 100
5mA
10mA
20mA
LBA120L
Typical LED Forward Voltage Drop
vs. Temperature
Temperature (°C)
LED Forward Voltage Drop (V)
1.8
1.6
1.4
1.2
1.0
0.8
-40 -20 0 20 40 60 80 120100
50mA
30mA
20mA
10mA
5mA
Page 5
LBA120L
www.clare.com
5
Rev. 3
PERFORMANCE DATA*
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact
our application department.
LBA120L - Form A
Typical Turn-On vs. LED Forward Current
(Load Current = 170mADC)
Turn-On (ms)
LED Forward Current (mA)
0
2 4 6 8 10 12 14 16 18
0.40
0.35
0.30
0.25
0.20
0.15
0.10
20
LBA120L - Form B
Typical Turn-On vs. LED Forward Current
(Load Current = 170mADC)
LED Forward Current (mA)
Turn-On (ms)
0
5 1015202530354045
0.634
0.632
0.630
0.628
0.626
0.624
0.622
50
LBA120L - Form A
Typical Turn-Off vs. LED Forward Current
(Load Current = 170mADC)
LED Forward Current (mA)
Turn-Off (ms)
0
2 4 6 8 10 12 14 16 18
20
0.160
0.150
0.140
0.130
0.120
0.110
0.100
LBA120L - Form B
Typical Turn-Off vs. LED Forward Current
(Load Current = 170mADC)
LED Forward Current (mA)
Turn-Off (ms)
0
5 1015202530354045
1.2
1.0
.8
.6
.4
.2
0
50
LBA120L - Form A
Typical On-Resistance vs. Temperature
(Load Current = 170mADC; IF = 5mA)
Temperature (°C)
On-Resistance (Ω)
-40
60
50
40
30
20
10
0
-20 0 20 40 60 80 100
LBA120L - Form B
Typical On-Resistance vs. Temperature
(Load Current = 170mADC; IF = 5mADC)
Temperature (°C)
On-Resistance (Ω)
-40
60.000
50.000
40.000
30.000
20.000
10.000
0
-20 0 20 40 60 80 100
LBA120L - Form A
Typical IF for Switch Operation
vs. Temperature
(Load Current = 170mADC)
Temperature (°C)
LED Current (mA)
-40
3.000
2.500
2.000
1.500
1.000
0.500
0
-20 0 20 40 60 80 100
LBA120L - Form B
Typical IF for Switch Operation
vs. Temperature
(Load Current = 170mADC; IF = 5mADC)
Temperature (°C)
LED Current (mA)
-40
3.0
2.5
2.0
1.5
1.0
0.5
0
-20 0 20 40 60 80 100
LBA120L - Form A
Typical IF for Switch Dropout
vs. Temperature
(Load Current = 170mADC)
Temperature (°C)
LED Current (mA)
-40
3.000
2.500
2.000
1.500
1.000
0.500
0
-20 0 20 40 60 80 100
LBA120L - Form B
Typical IF for Switch Dropout
vs. Temperature
(Load Current = 170mADC)
Temperature (°C)
LED Current (mA)
-40
3.0
2.5
2.0
1.5
1.0
0.5
0
-20 0 20 40 60 80 100
LBA120L - Form A
Typical Load Current vs. Load Voltage
(Ambient Temperature = 25°C)
IF = 5mADC
Load Voltage (V)
Load Current (mA)
200
150
100
50
0
-50
-100
-150
-200
-2.5 -1.5-2.0 -0.5-1.0 0 0.5 1.5 2.01.0 2.5
LBA120L - Form B
Typical Load Current vs. Load Voltage
(Ambient Temperature = 25°C)
IF = 5mADC
Load Voltage (V)
Load Current (mA)
200
150
100
50
0
-50
-100
-150
-200
-2.0 -1.5 -1.0 -0.5 0.5 1.0 1.502.0
LBA120L
Energy Rating Curve
Time
Load Current (A)
10µs
1.2
1.0
0.8
0.6
0.4
0.2
0
1ms100µs 100ms
1s
10ms 10s 100s
LBA120L
Typical Current Limiting vs. Temperature
IF = 5mADC
Temperature (°C)
Current (mA)
400
350
300
250
200
150
100
50
0
-40 -20 0 20 40 60 80 100
Page 6
www.clare.com
6
LBA120L
Rev. 3
Dimensions
mm
(inches)
Mechanical Dimensions
4.445 ± .127
(.175 ± .005)
3.302
(.130)
7.620 ± .254
(.300 ± .010)
6.350 ± .127
(.250 ± .005)
8.077 ± .127
(.318 ± .005)
2.540 ± .127
(.100 ± .005)
9.525 ± .254
(.375 ± .010)
.457 ± .076
(.018 ± .003)
.254 TYP.
(.010)
.635 TYP.
(.025)
8 Pin DIP Surface Mount (“S” Suffix)
9.652 ± .381
(.380 ± .015)
7.239 TYP.
(.285)
3.302
(.130)
7.620 ± .254
(.300 ± .010)
9.144 TYP.
(.360)
6.350 ± .127
(.250 ± .005)
9.652 ± .381
(.380 ± .015)
2.540 ± .127
(.100 ± .005)
9.144 ± .508
(.360 ± .020)
.457 ± .076
(.018 ± .003)
8.077 ± .127
(.318 ± .005 )
8 Pin DIP Through Hole (Standard)
8 Pin Flatpack (“P” Suffix)
7.620 ± .254
(.300 ± .010)
2.159 TYP.
(.085)
2.286 MAX.
(.090)
9.398 ± .127
(.370 ± .005)
6.350 ± .127
(.250 ± .005)
9.652 ± .381
(.380 ± .015)
2.540 ± .127
(.100 ± .005)
8.077 ± .127
(.318 ± .005)
.457 ± .076
(.018 ± .003)
.203
(.008)
.635 ± .127
(.025)
PC Board Pattern
(Top View)
6.350 ± .127
(.250 ± .005)
2.540 ± .127
(.100 ± .005)
7.620 ± .127
(.300 ± .005)
7.620 ± .127
(.300 ± .005)
8-.800 DIA.
(8-.031 DIA.)
PC Board Pattern
(Top View)
2.540 ± .127
(.100 ± .005)
8.305 ± .127
(.327 ± .005)
1.905 ± .127
(.075 ± .005)
1.498 ± .127
(.059 ± .005)
PC Board Pattern
(Top View)
2.540 ± .127
(.100 ± .005)
8.763 ± .127
(.345 ± .005)
1.193
(.047)
.787
(.031)
Page 7
LBA120L
www.clare.com
7
Rev. 3
Dimensions
mm
(inches)
Mechanical Dimensions
Tape and Reel Packaging for 8 Pin Flatpack Package
7.493 ± .102
(.295 ± .004)
12.090
(.476)
1.753 ± 0.102
(.069 ± .004)
3.987 ± .102
(.157 ± .004)
1.498 ± .102
(.059 ± .004)
6.731 MAX.
(.265)
.406 MAX.
(.016)
4.877
(.192)
Top Cover
Tape
2.007 ± .102
(.079 ± .004)
11.988 ± .102
(.472 ± .004)
User Direction of Feed
.050R TYP.
16.002 ± .305
(.630 ± .012)
10.287
(.405)
Embossment
Embossed Carrier
Top Cover
Tape Thickness
.102 MAX.
(.004)
10.287 ± .102
(.405 ± .004)
1.549 ± .102
(.061 ± .004)
330.2 DIA.
(13.00)
18
Tape and Reel Packaging for 8 Pin Surface Mount Package
7.493 ± .102
(.295 ± .004)
12.090
(.476)
1.753 ± .102
(.069 ± .004)
3.987 ± .102
(.157 ± .004)
1.498 ± .102
(.059 ± .004)
6.731 MAX.
(.265)
.406 MAX.
(.016)
4.877
(.192)
Top Cover
Tape
2.007 ± .102
(.079 ± .004)
11.989 ± .102
(.472 ± .004)
User Direction of Feed
.050R TYP.
16.002 ± .305
(.630 ± .012)
10.300
(.405)
Embossment
Embossed Carrier
Top Cover
Tape Thickness
.102 MAX.
(.004)
10.300 ± .102
(.405 ± .004)
1.549 ± .102
(.061 ± .004)
330.2 DIA.
(13.00)
18
Page 8
CLARE LOCATIONS
Clare Headquarters
78 Cherry Hill Drive
Beverly, MA 01915
Tel: 1-978-524-6700
Fax: 1-978-524-4900
Toll Free: 1-800-27-CLARE
Clare Micronix Division
145 Columbia
Aliso Viejo, CA 92656-1490
Tel: 1-949-831-4622
Fax: 1-949-831-4628
SALES OFFICES
AMERICAS
Americas Headquarters
Clare
78 Cherry Hill Drive
Beverly, MA 01915
Tel: 1-978-524-6700
Fax: 1-978-524-4900
Toll Free: 1-800-27-CLARE
Eastern Region
Clare
P.O. Box 856
Mahwah, NJ 07430
Tel: 1-201-236-0101
Fax: 1-201-236-8685
Toll Free: 1-800-27-CLARE
Central Region
Clare Canada Ltd.
3425 Harvester Road, Suite 202
Burlington, Ontario L7N 3N1
Tel: 1-905-333-9066
Fax: 1-905-333-1824
Western Region
Clare
1852 West 11th Street, #348
Tracy, CA 95376
Tel: 1-209-832-4367
Fax: 1-209-832-4732
Toll Free: 1-800-27-CLARE
Canada
Clare Canada Ltd.
3425 Harvester Road, Suite 202
Burlington, Ontario L7N 3N1
Tel: 1-905-333-9066
Fax: 1-905-333-1824
EUROPE
European Headquarters
CP Clare nv
Bampslaan 17
B-3500 Hasselt (Belgium)
Tel: 32-11-300868
Fax: 32-11-300890
France
Clare France Sales
Lead Rep
99 route de Versailles
91160 Champlan
France
Tel: 33 1 69 79 93 50
Fax: 33 1 69 79 93 59
Germany
Clare Germany Sales
ActiveComp Electronic GmbH
Mitterstrasse 12
85077 Manching
Germany
Tel: 49 8459 3214 10
Fax: 49 8459 3214 29
Italy
C.L.A.R.E.s.a.s.
Via C. Colombo 10/A
I-20066 Melzo (Milano)
Tel: 39-02-95737160
Fax: 39-02-95738829
Sweden
Clare Sales
Comptronic AB
Box 167
S-16329 Spånga
Tel: 46-862-10370
Fax: 46-862-10371
United Kingdom
Clare UK Sales
Marco Polo House
Cook Way
Bindon Road
Taunton
UK-Somerset TA2 6BG
Tel: 44-1-823 352541
Fax: 44-1-823 352797
ASIA/PACIFIC
Asian Headquarters
Clare
Room N1016, Chia-Hsin, Bldg II,
10F, No. 96, Sec. 2
Chung Shan North Road
Taipei, Taiwan R.O.C.
Tel: 886-2-2523-6368
Fax: 886-2-2523-6369
http://www.clare.com
Worldwide Sales Offices
Specification: DS-LBA120L-R3
©Copyright 2000, Clare, Inc.
OptoMOS
®
is a registered trademark of Clare, Inc.
All rights reserved. Printed in USA.
2/13/01
Clare cannot assume responsibility for use of any circuitry other
than circuitry entirely embodied in this Clare product. No circuit
patent licenses nor indemnity are expressed or implied. Clare
reserves the right to change the specification and circuitry, without notice at any time. The products described in this document
are not intended for use in medical implantation or other direct life
support applications where malfunction may result in direct physical harm, injury or death to a person.
Loading...