Page 1
Model 533, 534, 535
Vishay Spectrol
7
/8" (22.2 mm) Multiturn Wirewound
533: 3 Turns/534: 10 Turns/535: 5 Turns
FEATURES
• Bushing and servo mount designs available
• Special resistance tolerances to 1 %
• Rear shaft extensions and support bearing
• Metric shaft available
Note
• The color of this product may either be black (US market) or blue
(other regions)
ELECTRICAL SPECIFICATIONS
PARAMETER MODEL 533 MODEL 534 MODEL 535
Resistance Range - Standard Values 50 Ω to 20 kΩ 100 Ω to 100 kΩ 50 Ω to 50 kΩ
Capability Range 5 Ω to 60 kΩ 10 Ω to 200 kΩ 5 Ω to 100 kΩ
Standard Tolerance ± 5 % ± 5 % ± 5 %
Linearity (Independent) ± 0.25 % ± 0.25 % ± 0.25 %
Noise 100 Ω ENR 100 Ω ENR 100 Ω ENR
+ 10°
Rotation (Electrical and Mechanical)
Power Rating (at 70 °C) 1.0 W 2.0 W 1.5 W
Insulation Resistance 1000 MΩ minimum 500 V
Dielectric Strength 1000 V
Absolute Minimum Resistance
Temperature Coefficient 20 ppm/°C (standard values, wire only)
End Voltage 0.25 % of total applied voltage, maximum
Phasing CCW end points - section 2 phased to section 1 within ± 2°
Taps Center tap only
1080°
- 0°
• Dual gang configuration and concentric shafts
• High torque, center tap, slipping clutch on request
• Special markings and front shaft extensions
+ 10°
3600°
- 0°
DC
minimum 60 Hz
RMS
Not to exceed linearity x total resistance or 1 Ω,
whichever is greater
1800°
+ 10°
- 0°
RoHS
COMPLIANT
MARKING
Unit
Identification
Manufacturer’s name and model number,
resistance value and tolerance, linearity
specification date code and terminal
identification
RESISTANCE VALUES
Ohms
533:
534: 100R, 200R, 500R, 1K, 2K, 5K, 10K, 20K, 50K, 100K
535: 50R, 100R, 200R, 500R, 1K, 2K, 5K, 10K, 20K, 50K
50R, 100R, 200R, 500R, 1K, 2K, 5K, 10K, 20K
ORDERING INFORMATION/DESCRIPTION
The Models 533 (3 turns), 534 (10 turns) and 535 (5 turns) can be ordered by stating
534 B 2 10K 20K 5 % C BO10 e4
MODEL MOUNTING NUMBER OF
B: Bushing
S: Servo
SECTIONS
OHMIC
VAL UE
SECTION
o
N
1
OHMIC
VAL UE
SECTION
o
N
2
TOLERANCE
ON OHMIC
VAL UE
LINEARITY PACKAGING LEAD FINISH
± 0.25 %
(STD)
Box of
10 pieces
SAP PART NUMBERING GUIDELINES
534 B 2 103 203 J C B10
MODEL STYLE NUMBER OF
SECTIONS
B: Bushing
S: Servo
Document Number: 57065 For technical questions, contact: sfer@vishay.com
Revision: 06-Apr-10 123
OHMIC VALUE
SECTION N
103 = 10K 203 = 20K J: ± 5 %
OHMIC VALUE
o
1
SECTION No 2
TO L ER A NC E O N
OHMIC VALUE
F: ± 1 %
LINEARITY PACKAGING
C: ± 0.25 %
CUSTOM:
L: ± 0.20 %
D: ± 0.1 %
Box of
10 pieces
www.vishay.com
Page 2
Model 533, 534, 535
7
Vishay Spectrol
SINGLE SECTION DIMENSIONS in inches (millimeters)
0.750 (19.05)
0.312 (7.92)
0.062 (1.57)
0.200 MIN. (5.08)
BUSHING
MOUNT MODEL:
534B
Ø 0.875
(22.22)
0.850 (21.59)
0.057 (1.45) MIN.
0.300 (7.62) MIN.
SERVO
MOUNT MODEL:
534S
Mounting hardware, washer and panel nut, nickel plated
± 0.015
± 0.015
± 0.015
3
/8 - 32UNEF - 2A
SCREWDRIVER SLOT
± 0.015
± 0.015
Ø 0.875
(22.22)
Ø 0.750 (19.05) MAX.
123
2
/8" (22.2 mm) Multiturn Wirewound
533: 3 Turns/534: 10 Turns/535: 5 Turns
± 0.031
+ 0.0000
- 0.0003
± 0.010
0.375 (9.52)
0.062 (1.57)
0.062 (1.57)
Ø 0.1248 (3.17)
± 0.031
Ø 0.7500 (19.05)
Ø 0.4062
(10.32)
+ 0.0000
- 0.0003
1
3
0.812 (20.62)
0.030 MAX. (0.76)
Ø 0.2497 (6.34)
0.032 x 0.032
(0.81) x (0.81) DP
+ 0.0000
- 0.0020
+ 0.0000
- 0.0005
Ø 0.875 (22.22)
METRIC SHAFT: 534B...8872
+ 0.000
- 0.0003
(15.88)
1
9 mm x 0.75 P
30°
TYP.
Ø 6.00 mm
R 0.625 MAX.
2
CW
3
SCHEMATIC
MECHANICAL SPECIFICATIONS
PARAMETER
Bearing Type Bushing: Sleeve bearing Servo: Ball bearing
Torque (Maximums): Starting
Section 1
Section 2
Torque (Maximums): Running
Section 1
Section 2
Weight (Maximums)
Section1
0.5 oz. - in (36 g - cm)
0.9 oz. - in (65 g - cm)
0.4 oz. - in (28.80 g - cm)
0.7 oz. - in (50.40 g - cm)
Section 2
Stop Strength 75 oz. - in (static) (5.4 kg - cm)
Ganging 2 sections maximum
POWER RATING CHART
4
534
3
535
2
533
RATED POWER IN W
1
534
533/535
0.7 oz. - in (50 g - cm)
1.1 oz. - in (79 g - cm)
534
0.6 oz. - in (43.20 g - cm)
533/535
0.9 oz. - in (64.8 g - cm)
0.75 oz. (21.26 g)
1.25 oz. (35.44 g)
ENVIRONMENTAL SPECIFICATIONS
Vibration 15 g thru 2000 Hz
Shock 50 g
Rotational Life (Shaft Revolution)
533
534
534 (Servo)
535
Load Life 900 h
300 000
1 000 000
> 1 000 000
500 000
0
020406080 100 120 140 160
AMBIENT TEMPERATURE IN °C
www.vishay.com For technical questions, contact: sfer@vishay.com
Temperature Range - 55 °C to + 125 °C
Document Number: 57065
124 Revision: 06-Apr-10
Page 3
Model 533, 534, 535
7
/8" (22.2 mm) Multiturn Wirewound
533: 3 Turns/534: 10 Turns/535: 5 Turns
RESISTANCE ELEMENT DATA
RESISTANCE VALUE
(Ω)
533 534 535 533 534 535 533 534 535 533 534 535 533 534 535
50 - 50 0.149 - 0.120 0.0746 - 0.0603 141.0 - 173.0 7.07 - 8.66
100 100 100 0.111 0.060 0.075 0.1114 0.0603 0.0746 100.0 141.0 122.0 10.0 14.1 12.2
200 200 200 0.097 0.037 0.061 0.1954 0.0746 0.1220 70.7 100.0 86.6 14.1 20.0 17.3
500 500 500 0.069 0.031 0.049 0.3424 0.1520 0.2459 44.7 63.2 54.7 22.4 31.6 27.4
1K 1K 1K 0.063 0.025 0.041 0.6331 0.2459 0.4113 31.6 44.7 38.7 31.6 44.7 38.7
2K 2K 2K 0.041 0.021 0.031 0.8206 0.4113 0.6331 22.4 31.6 27.4 44.7 63.2 54.8
5K 5K 5K 0.044 0.016 0.034 2.2330 0.8206 1.7230 14.1 20.0 17.3 70.7 100.0 86.6
10K 10K 10K 0.034 0.017 0.030 3.4510 1.7230 3.0160 10.0 14.1 12.2 100.0 141.0 122.0
RESOLUTION
%
OHMS PER TURN
MAXIMUM CURRENT
AT 70 °C AMBIENT
(mA)
Vishay Spectrol
MAXIMUM VOLTAGE
ACROSS COIL
(V)
20K 20K 20K 0.031 0.015 0.020 6.1790 3.0160 3.9910 7.07 10.0 8.66 141.0 200.0 173.0
- 50K 50K - 0.009 0.015 - 4.6690 7.4560 - 6.32 5.47 - 316.0 274.0
- 100K - - 0.007 - - 7.4560 - - 4.47 - - 447.0 -
---------------
---------------
Document Number: 57065 For technical questions, contact: sfer@vishay.com
Revision: 06-Apr-10 125
www.vishay.com
Page 4
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 www.vishay.com
Revision: 11-Mar-11 1
Loading...