Page 1
®
Manual Insert IC Card Connector
3S4YR-SCR
Economical, Manual Insert
IC Card Connector
■ Slim profile for compact design
■ ISO 7816 chip location
■ Housing compatible with Omron’s SBR type
for easy upgrade to IC cards
■ Wide operating temperature range
Ordering Information
Magnetic Tracks Supported (R, R/W)
1 2 3 Center JIS II IC Contact Interface Cover Cable Color Part Number
— — — — — ISO 7816 Contact No FPC Black 3S4YR-SCR0J
— — — — — ISO 7816 Contact No FPC Black 3S4YR-SCR0J-002
Note: Consult the IC Card Basics section of this catalog for IC contact descriptions.
■ TYPICAL APPLICATIONS
•ID Control
•Access Control
•Time and Attendance Control • Electronic Purse Systems
• Telecommunications
• Vending Machines
• Data Capturing
• Pre-Paid Systems
Specifications
Part number 3S4YR-SCR
Recommended card type IC Card ISO 7816
Contact resistance 500 mΩ max. between contact springs; 1 Ω max. between two FPC terminal tips
Card inserting force 1 kg max.
Card extracting force Approx. 100 g to 500 g
Card feeding speed 100 cm/sec (39 in/sec) max.
Service life 300,000 passes min.
Load voltage Card set switch 30 VDC max.
Current carrying capacity Card set switch 1 mA to 10 mA
Mounting location Indoors
Ambient temperature Operation -25° to 75°C (-13° to 167°F)
Storage -40° to 85°C (-40° to 185°F)
Ambient humidity Operation 10% to 95% RH without condensation
Storage 10% to 95% RH
Vibration 30 to 200 Hz (3 G) for 25 minutes in each of X, Y and Z directions
Shock 400 m/sec2 (40 G) in each of X, Y and Z directions
Dimensions 78L x 60W x 13.5H mm (3.07L x 2.36W x 0.53H in)
Weight Approx. 40 g (1.42 oz)
Page 2
3S4YR-SCR 3S4YR-SCR
Engineering Data
■ I/O INFORMATION
3S4YR-SCR FPC Interface Cable
Recommended Molex connectors part numbers 52103-1017,
52030-1010 and 52043-1010.
Pin # Signal Input/Output Description
1 SWC Input Card detection signal
2 SWA Output Card detection signal
3Vcc (C1) ◆ Circuit supply voltage
4 GND (C5) ◆ Zero voltage
5 RST (C2) ◆ Reset signal
6 VPP (C6) ◆ Programming voltage
7 CLK (C3) ◆ Clock signal
8 I/O (C7) ◆ Data input/output
9 RFU ◆ Reserved for future use
10 RFU ◆ Reserved for future use
◆ = Direct IC Contact
Dimensions
Unit: mm (inch)
■ 3S4YR-SCR
60 (2.36)
48 ± 0.2
(1.89 ± 0.01)
FPC
40 ± 1.5
(1.57 ± 0.06)
Three 2.1 (0.08) dia. (B)
for M2.5 tapping screws
48 ± 0.2
(1.89 ± 0.01)
78 ± 0.8 (3.07 ± 0.03)
Three 2.6 (0.10) dia. (A)
for M3 tapping screws
A
A
40 (1.57)
45 (1.77)
B
B
A
21
(0.83)
Chip card
15.2
(0.60)
19
(0.75)
B
13.5
(0.53)
4 (0.16)
3 (0.12)
58
(2.28)
63
(2.48)
4.5 (0.18)
9 (0.35)
0.5 (0.02)
Four R3
52 (2.05)
9
(0.35)
5 (0.20)
Note: Unless otherwise noted,
tolerance is ±0.3 mm.
2
Page 3
3S4YR-SCR 3S4YR-SCR
NOTE: DIMENSIONS ARE SHOWN IN MILLIMETERS. To convert millimeters to inches divide by 25.4.
OMRON ELECTRONICS, INC. OMRON CANADA, INC.
One East Commerce Drive 885 Milner Avenue
Schaumburg, IL 60173 Scarborough, Ontario M1B 5V8
1-800-55-OMRON 416-286-6465
Cat. No. GC CR3 06/00 Specifications subject to change without notice. Printed in the U.S.A.
99
Loading...