Danfoss TPOne-S Data sheet

Datasheet

TPOne-S Intelligent Programmable Room Thermostat with Smart App control

Features

Benefits:

•WiFi Connectivity

•Remote Controlled via TPOne Heating App

•A single TPOne-S can be paired with up to 10 mobile devices.

•One mobile device with TPOne Heating App can be linked with upto 20 TPOne-S thermostats

•Secure encrypted internet connection via Danfoss cloud services

•Full local control when WiFi/Internet is unavailable

TPOne Comfort Modes	TPOne-S Programmable Room Thermostat
	includes the quick access Comfort Modes
	interface. To the left of the display are 4
	dedicated user buttons. As a programmable
	device heating is controlled by a preset
	schedule but sometimes our schedules change
	intermittently so we have made it easy for the
	user to adapt their heating to suit.
	The Home, Away & Asleep buttons allow the user
	to quickly change the current setting to either
	save energy or deliver comfort when needed.
	These manual overrides stay until the next

TPOne-S is an intuitive programmable thermostat which delivers new levels of user friendly interaction. The large back-lit display uses easy read icons and text information to provide feedback on status and settings to the user.

Secure internet connection to the TPOne Heating smart phone App provides control of your heating from anywhere at any time. This allows the user to adapt their heating on the move saving money when away and improving comfort when returning home.

Installation is simplied by remote switching of the matched RF boiler relay and an optional add on relay can be connected to switch seperate domestic hot water systems. TPOne-S is recommended for fixed installation but also available is an optional table stand and plug in

power supply for users who want more flexibility.

•Includes DBR RF boiler relay

•Holiday Scheduler

•Upper and Lower Temperature Limits

•Capacitive Touch Button Control

•°C or °F Selectable Display

•Audible Button Click (selectable)

•Frost Protect Temperature Setting

•Selectable Domestic Hot Water timer (requires additional DBR, supplied seperately)

•Clear Text Display (9 Languages)

•Boiler Service Timer

scheduled heating change so no need to remember to switch back to automatic control.

The additional standby button also gives the control to stop the heating completely, this will save energy when airing the home or can be used to switch off during Summer months

without having to change the schedule. Standby remains until the user chooses to switch back on.

These Comfort Modes are mirrored on the home page of the TPOne Heating App for quick changes on the move.

© Danfoss | Heating Segment | 2018.01

| VDHSI102 1

Datasheet	TPOne-S Programmable Room Thermostat

Ordering Information

Specifications

ErP Class

Item no.	Product name	EAN No
087N785600	TPOne-S + DBR	5013567423927
087N7857	TPOne (DBR) *	5013567423958
087N786800	Optional Table Stand	5013567423934
087N786900	Optional Wall Decor Plate	5013567423637
* Optional DBR for timed switching of Domestic Hot Water circuit

Thermostat Features	TPOne-S		DBR
Type	Programmable Thermostat		Boiler Relay
Power supply		230Vac, 50/60Hz
Relay type	-		Volt free, SPST type 1A
Relay Rating	-		3A (1A) at 230Vac
Transmission Frequency		868.42MHz
Maximum Range		30 Metres
WiFi Specification	802.11b/g (2.4GHz)		-
Setting temperature range	5-35 °C		-
Operating temperature range	0-45 °C		-
IP Rating	IP20		IP40
On/Off Control	Yes		-
Chrono-proportional control	Yes		-
Pollution degree		2 (domestic use)
Rated impulse voltage		2.5kV
Ball pressure test temperature		75oC
Software class		A
Construction	EN60730-2-9		EN60730-1
Dimensions (mm)	H66 x W155 x D30		H84 x W84 x D30

ERP Class

The products represented within this document are classified according to, and allow completion of, the Energy Related Product (ErP) Directive System Package fiche and the ErP system data label. ErP Labelling obligation is applicable from 26th September 2015.

	ErP Class	Product Function and ErP Description	Additional
			efficiency gain
	IV	TPI Room Thermostat, for use with on/off output heaters
	ErP	An electronic room thermostat that controls both thermostat cycle rate and in-cycle on/off ratio	2%
		of the heater proportional to room temperature. TPI control strategy reduces mean water tem-
	Product
	Class 4	perature, improves room temperature control accuracy and enhances system efficiency.

Wiring Details	TPOne-S	DBR

N L

	N L	1 2 3	4
230 Vac		(Not Used)
When using table stand	230 Vac	COM	ON
only use power supply
and USB cable provided

Danfoss Ltd.

Ampthill Road • Bedford • MK42 9ER • United Kingdom • Tel: [phone] • Fax: [phone] [e-mail] • www.heating.danfoss.co.uk

Danfoss can accept no responsibility for possible errors in catalogues, brochures, and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed.

All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

2

© Danfoss | Heating Segment | 2018.01

| VDHSI102