Danfoss MCX106 Installation guide

3500 Annapolis Lane North, Minneapolis, MN 55447 Telephone: (763) 509-2084 Telefax: (763

) 559-0108

DIMENSIONS

Unit Specification

MCX106 Hall Effect Level Sensor

ISSUE: 1 DATE: November 1995

Dimensions of the MCX106 in Millimeters (Inches).

FEATURES

• Non-contact sensor withstands high shock and vibration

• Input voltage adapted for microprocessor circuits

• Infinite resolution

• Long life

TECHNICAL DATA

ELECTRICAL

INPUT VOLTAGE

5.0 to 8.0 Vdc

HALL EFFECT ELECTROMAGNETIC SENSOR

Life is not limited by the number of cycles

MAXIMUM OUTPUT LOAD CURRENT

1 mA sourcing or sinking

MAXIMUM CURRENT DRAW

20 mA

OUTPUT IMPEDANCE

182A

• Designed to withstand the mobile environment

- -40° to 85° C operating range

- 95% relative humidity

- Meets off-highway vibration standards

- Protected against static discharge, EMI and RFI

HYSTERESIS

Negligible

LINEARITY

Approximately ±3% over the rated angle. Since the output is proportional to the sine of the input angle, greater linearity can be achieved by reducing the angle employed.

TEMPERATURE RATING

-40° to 85° C (-40° to 185° F) operating

-55° to 125° C (-67 to 257° F) storage

TEMPERATURE STABILITY

Null shift of ±.028% per °C from -40° to 85° C Gain shift of ±.025% per °C from -40° to 85° C

K20279 UNIT SPEC

1 OF 1